Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Driveway & Pavers: The San Francisco Owner’s Guide
We install Sakrete-compatible driveway and paver systems across San Francisco, and most full paver driveway jobs run $8,260 – $21,240 installed, while a concrete pour lands at $5,310 – $14,160. Repairs and resealing start far lower, at $295 – $825 for sealing. When a Sakrete surface starts to go, owners usually notice it in one of two ways: a hairline crack that spreads a little more each rainy season, or a low corner where water pools after a storm and never quite drains. Both point to the same underlying story – a base that moved, a joint that opened, or a mix that cured too fast in the sun. We’re an independent contractor, not affiliated with Sakrete, and we match the right material to your existing surface.
Which Sakrete Models This Applies To
Sakrete isn’t one product – it’s a family of bagged mixes, and what’s right for your driveway depends on which one is failing. The common ones San Francisco homeowners bring us are Sakrete High-Strength Concrete Mix (the 80 lb bag most driveways are poured with), Sakrete Sand Mix for topping and patching, and Sakrete Paver Set or Polymeric Sand for the joints between pavers. Each behaves differently and each fails differently.
To identify what you’re working with, check the original bag, any leftover inventory in the garage, or the pour receipt from whoever did the last job. If there’s nothing on paper, we measure: slab thickness, joint spacing, and the sound of the surface under a tap tell us most of what we need. On pavers, the joint sand is the tell – polymeric sand sets hard and dark, plain sand stays loose and pale.
Here’s the OEM-versus-aftermarket decision specific to Sakrete: Sakrete brand mixes are widely available and consistent bag to bag, which matters on small patches where a different mix could cure at a different rate and crack along the seam. For a full replacement, we often specify a regional mix designed for the Bay Area’s coastal moisture, which outperforms a standard bagged product over a ten-year horizon. On pavers, we stay with Sakrete polymeric sand when the existing joint profile matches it, because a mismatched sand shrinks away from the joint edges within one wet season. You’ll see the same rigor we bring to KraftMaid cabinets or Silestone counters – the material has to match the surface it’s going onto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Driveway & Pavers Is Failing
- Hairline cracks spreading from corners or joints. Usually a sign the sub-base wasn’t compacted enough or the slab was poured too thin – water gets in, freezes or expands, and the crack widens. In San Francisco’s fog belt, cracks on the ocean side often show up first because of the constant moisture cycling.
- Pooling water after rain. A low spot means the base has settled or the original slope wasn’t set correctly. Left alone, that standing water works its way under the slab or paver bed and speeds up everything else on this list.
- Pavers rocking or shifting underfoot. When you step on a paver and it moves, the bedding sand beneath it has washed out or the edge restraint has failed. This is one of the earliest warnings and one of the cheapest to fix if you catch it early.
- Joint sand washing out. Polymeric sand should stay put. If it’s eroding in a line or a corner, water is channeling where it shouldn’t – often because a downspout or gutter is dumping onto the driveway.
- Surface scaling or flaking. The top layer of concrete is spalling off, usually from a mix that was too wet at pour or from de-icing salt over the years. Once scaling starts, patching is a stopgap and replacement becomes the honest answer.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you pay in San Francisco depends on three things: surface area, access (a narrow driveway off a steep street costs more to work), and whether we’re replacing a full driveway or repairing a section. Here’s how the ranges break down:
- Paver driveway installation: $8,260 – $21,240 – includes excavation, base prep, bedding sand, pavers, polymeric sand, and edge restraint.
- Concrete driveway installation: $5,310 – $14,160 – includes formwork, rebar or mesh, pour, finish, and control joints.
- Driveway replacement (tear-out and redo): $5,900 – $16,520 – includes demo and haul-away of the old surface.
- Driveway sealing: $295 – $825 – a protective coat that extends the life of concrete or pavers.
- Paver patio installation (if you’re extending the hardscape): $4,130 – $12,980.
Every quote is upfront and line-itemed – the number you see is the number you pay. The work is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if it’s not done right, we make it right. On projects over $10,000, you get $1,000 off, and 0% financing for 18 months is available.
DIY or Call Us?
Some of this you can safely check yourself. Walking the surface to find rocking pavers, watching where water pools after a rain, and re-sanding a small joint that’s washed out are all reasonable weekend tasks for a careful homeowner. Replacing an entire polymeric sand joint system or patching a section of slab is where it gets tricky – the wrong mix, the wrong moisture level, or a base that wasn’t compacted will fail again within a season, and you’ve spent the money twice.
Tear-out and re-pour is genuinely heavy work, and a 4-inch slab of concrete is not something to move by hand. Where DIY most often goes wrong on Sakrete hardscape is base prep – it’s the invisible step nobody photographs and the one that determines whether the surface lasts five years or twenty-five. If your driveway has cracking beyond a hairline, shifting pavers, or standing water, that’s a call-us situation, not a patch kit. Reach us at (866) 320-2646 and we’ll take a look. Calls are answered by a live person 24/7.
FAQs
A properly installed Sakrete concrete driveway lasts 25 – 30 years in normal conditions; pavers with quality polymeric sand last 20 – 25 years. In San Francisco, coastal fog and seasonal rain shorten those numbers on the ocean side of the city – a concrete surface facing the Pacific sees more moisture cycling than one in the warmer, drier neighborhoods inland, and hairline cracks can appear two to three years earlier there. Call (866) 320-2646 for an assessment of your specific surface.
Often, yes. Isolated cracks, a few rocking pavers, or a joint that’s lost its sand are all repairable, and repair is usually the right call when the problem is local. Replacement is the honest answer when scaling has spread across the slab, when multiple sections are shifting, or when the base itself has failed – patching over a bad base just delays the same failure. Call (866) 320-2646 and we’ll tell you straight which one you’re looking at.
A localized repair or joint re-sand is usually a single visit, done in a day. A full driveway replacement in San Francisco typically takes three to five working days – one day for tear-out, one to two for base prep, one to two for pour or paver laying and finishing – plus cure time before you drive on new concrete. We schedule around your access needs so you’re not blocked in. Call (866) 320-2646 for a timeline on your project.
We specify the matching Sakrete product for your surface and source it through our verified supplier network, then bring it to your site on the scheduled day – we don’t stock inventory or carry parts on a truck, so the material is ordered for your job, not pulled from a shelf. For full replacements we may recommend a Bay Area-specific mix that performs better in coastal conditions, and we’ll explain the tradeoff before you decide. Call (866) 320-2646 to talk through your options.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.