Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Roofing: The San Francisco Owner’s Guide
Cover-compatible roofing for San Francisco homes typically runs $470 – $2,125 for targeted repairs and $9,440 – $23,600 for a full replacement, installed by our background-checked, uniformed technicians and backed by our 730-Day Done Right Promise. Most repair work is completed in a single visit; full replacements are scheduled estimates, not same-day jobs.
Here’s how San Francisco owners usually find us. A six-inch sheet metal “cover” flashing piece at a chimney, skylight curb, or parapet edge has curled, rusted through, or pulled loose from its fasteners. The first hard rain sends water down the inside of a wall in the Sunset or Potrero Hill. Or the owner is up top after a windy night and sees the cover flashing flapping at a corner. That’s when we get the call.
Which Cover Models This Applies To
Cover flashing is a general term for the top-of-cavity metal piece – counterflashing, head flashing, or a cover cap – that sheds water over the laps below it. It’s not a single interchangeable product, so matching matters. Measure three things before you order anything: the developed width (how wide the metal is before it’s bent), the gauge (23-gauge is standard for residential; heavier where it steps over a parapet), and the profile – the exact bends, including any drip hem or kick-out.
A compatibility gotcha that bites a lot of San Francisco buyers: the cover piece must overlap the flashing below it by at least 4 inches and terminate in a hem that diverts water clear of the wall, not flush against it. A cover cut to the old piece’s dimensions will run short. For material, we recommend coated steel or pre-finished copper – standard galvalume and bare steel rust fast in our salt air and fog, and we see 6-to-10-year failure on those in exposed areas.
OEM parts from the original roofer or manufacturer rarely exist for flashing (it’s cut on-site), so quality fabrication by a sheet metal shop is the norm – and preferable. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Roofing Is Failing
- Rust bloom or pinholes along the fold. Salt fog and marine air corrode the thinnest part of any bend first. Once you can see daylight through it, water is getting in.
- Lifted fasteners or sealant pulling away. The screws that pin the cover to the roof deck or wall have backed out, or the sealant underneath has dried and cracked. Wind and sun do this over time.
- Rusted or curled drip edge at the exposed lip. The bottom edge loses its kick-out and water starts running backward under the shingles.
- Interior water stains near a chimney, skylight, or parapet. The cover is the #1 suspect when the wet spot is directly below the roof penetration.
- Daylight or sag visible where the cover meets the wall. The piece has separated and is no longer shedding water away from the siding or stucco.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For San Francisco, expect $470 – $2,125 for roof repair that covers replacing cover flashing, and $9,440 – $23,600 for a full roof replacement when the flashing failure has rotted the deck or laps far beyond repair. Metal roof work runs $17,700 – $47,200 across that full range of size and material.
What moves the number: access and height (steep or tight-lot work costs more), how many penetrations you have, whether the deck underneath is soft, and material choice (pre-finished copper costs more than coated steel).
Our quotes are line-item: so many feet of cover piece, so many hours of labor, disposal, and accessories, all separate. That’s upfront pricing with no surprises – the number you see is the number you pay. Every install carries our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Check the visible stuff first. Look for rust, loose fasteners, or lifting lip from the ground with binoculars or a ladder kept on solid footing, and note any interior stains before the next storm. That’s where honest DIY ends. Roofing metal takes fabrication (a sheet metal brake and shear), correct overlap and fastening, and full underlayment behind the cover to back up the joint.
Go up on a pitched roof and try to cut and bend your own cover and it looks wrong, leaks worse, or you fall – that’s the story we hear most. This is a trained, insured professional’s job.
For an exact quote, call us at (866) 320-2646 – we answer live, 24/7, and free estimates are on us.
FAQs
It depends on the metal. Galvalume or bare steel cover flashing typically gives you 6 – 10 years in San Francisco’s marine air before rust reaches a pinhole; pre-finished copper runs 25 – 40 years. Call (866) 320-2646 for a free inspection.
Often yes. A targeted flashing repair runs $470 – $2,125 and solves most isolated cover failures. If interior rot or wide lap damage has spread, a full replacement at $9,440 – $23,600 is the sensible call. We’ll tell you which and back it with the 730-Day Done Right Promise.
Most cover flashing repairs are done in a single visit. Replacements of a large roof are scheduled estimates, not same-day, and we’ll confirm timing before you commit. Call (866) 320-2646 to book.
We shop out the exact profile to a sheet metal fabricator – measured, bent, and matched to your roof. You don’t have to hunt a stock part, because on-roof flashings are almost always cut to fit. Call (866) 320-2646 and we’ll handle matching.
Groundwork Construction Co. of San Francisco also handles the rest of the envelope while we’re on your roof – windows, doors, and additions that tie into a new roofline – so you’re dealing with one contractor from foundation to finish line. We also service KraftMaid, Cambria, and Silestone cabinetry and countertops on related interior projects. Built to last, backed in writing, and one call away.
Call (866) 320-2646 for a free estimate on your Cover roofing in San Francisco. Upfront pricing, live person 24/7, and a 730-Day Done Right Promise on every install. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.