Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Windows & Doors: The San Francisco Owner’s Guide
We match and install Cover-compatible windows and doors for San Francisco homeowners, with most standard window replacements running $5,310 to $17,700 and impact-rated units at $9,440 to $29,500. Most single-unit swaps are finished in one visit. Owners usually find the problem the same way: a window that won’t latch flush on a foggy Bernal Heights morning, a door dragging on its sill in the Sunset, or condensation trapped between panes that never dries out.
Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Cover. We measure your opening, confirm the series, and install a part that fits the frame you already have.
Which Cover Models This Applies To
Cover products span several window and door lines, and the part you need depends on which one is stamped on your unit. Before ordering anything, find the manufacturer label. On windows it usually sits in the head jamb or the side jamb channel, visible when you open the sash. On doors, check the top edge of the slab and the hinge jamb. The label carries the series name, the rough opening dimensions, and a unit code. Photograph it before you touch anything.
Two compatibility gotchas catch San Francisco owners regularly. First, tilt-in double-hung sashes from different series use different pivot shoe and balance assemblies, and they are not interchangeable even when the sash looks identical. Second, replacement insulated glass units are matched to the sash’s glazing channel depth, so a glass pack built for a 7/8-inch channel will not seat in a unit built for 1-inch. Measure the channel, not the visible glass.
On the OEM-versus-aftermarket question: OEM parts guarantee a drop-in fit and preserve any remaining manufacturer coverage on the unit. Quality aftermarket equivalents cost less and are fine for wear items like weatherstripping, sill sweep, and screens, but for balances, hinges, and multipoint hardware we recommend OEM or a verified equivalent matched to the series. Parts for KraftMaid, Cambria, and Silestone projects are handled the same way when a remodel touches adjacent openings.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Windows & Doors Is Failing
- The sash won’t stay up. A snapped or stretched balance spring, or a failed pivot shoe, is the usual cause. Once the balance goes, the sash drops and the seal at the sill breaks.
- Fogging or water between the panes. The factory seal on the insulated glass unit has failed, letting moisture in. In San Francisco’s marine air this shows up fast, and the glass has to be replaced rather than dried out.
- The door drags or won’t latch. A worn hinge, a sagging slab, or a shifted strike plate. Left alone, the drag wears the weatherstrip and lets wind-driven rain past the sill.
- Drafts and rattles along the frame. Failed weatherstripping, a worn sill sweep, or a gasket that has hardened. Cheap part, big comfort difference.
- The lock or multipoint hardware won’t engage smoothly. Worn keeps, a misaligned gearbox, or a handle set that has lost its cam. If the door won’t lock, that’s a security problem, not a nuisance.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Francisco pricing depends on unit size, glazing type, and how much trim and finish work the opening needs. These installed ranges cover parts and labor together, quoted upfront so the number you see is the number you pay.
| Job | Installed Range |
|---|---|
| Standard window replacement | $5,310 – $17,700 |
| Impact-rated window installation | $9,440 – $29,500 |
| Single sash or glass unit (within a replacement scope) | Quoted per opening |
What moves you up the range: impact glass, custom sizing for older San Francisco frames that are out of square, and full-frame rather than insert installation. What’s included every time: the part, removal and disposal of the old unit, sealing and flashing at the opening, and finish trim. All work is covered by our 730-Day Done Right Promise, so if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: photograph the label, test whether the sash stays up, feel for drafts at the frame, and confirm the door latches. That information helps us quote accurately.
Where DIY goes wrong on windows and doors is at the opening itself. A window on an upper floor of a San Francisco Victorian is a fall hazard, and pulling a sash or a door slab without the right blocking can drop it on you or damage the frame. Impact glass is heavy and unforgiving if it chips on the edge. Adjusting multipoint door hardware without the right alignment gauge usually makes the misalignment worse. If the unit is above the first floor, or the door won’t lock, call us at (866) 320-2646 and we’ll take a look.
FAQs
Expect 15 to 20 years from a well-installed window before the insulated glass seal fails, and 20-plus years from a quality door slab with hardware serviced along the way. San Francisco’s salt air and daily fog cycles wear weatherstripping and exterior finishes faster than a dry inland climate, so plan on replacing gaskets and sweeps every 5 to 7 years. Call (866) 320-2646 for an exact quote – estimates are free.
Often yes. Balances, pivot shoes, weatherstripping, sill sweeps, screens, and door hardware are all replaceable on their own, and that’s usually the cheaper path. Fogged glass and cracked sashes are replacement items, not repair items. We’ll tell you which one you’re facing after we see it. Call (866) 320-2646 to schedule.
A single window or door swap is typically finished in one visit, usually a few hours. Multi-unit jobs across a whole facade take longer and we’ll give you a schedule in writing before we start. Call (866) 320-2646 for a free estimate.
We identify your Cover series from the label and order the matching component through verified supplier channels, using OEM parts for balances, hinges, and multipoint hardware. We don’t claim to stock parts or carry them on a truck, so sourcing takes a few business days for most items. Call (866) 320-2646 and we’ll confirm availability for your model.
If you’ve got a window that won’t close or a door that won’t lock, don’t sit on it through another fog season. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate, and we’ll measure the opening, match the part to your Cover unit, and quote it upfront. Our technicians have up to 12 years of experience, and every job is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.