Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Home Additions & ADU: The San Francisco Owner’s Guide
We install Plant Prefab-compatible home additions and ADUs across San Francisco, with additions typically landing between $53,100 and $153,400 and full ADU builds running $106,200 to $259,600. Groundwork Construction Co. of San Francisco is an independent builder, not affiliated with Plant Prefab. Standard additions usually take several weeks of site work, not same-day service. This is planned construction, and we schedule it like planned construction.
Owners tend to find the problem the same way: a hairline crack spreads along the drywall seam where the new module meets the existing house, a door that closed cleanly last spring starts sticking as the soil shifts, or a west-facing exterior wall in the Sunset shows water staining after a storm. Plant Prefab systems ship as factory-built modules that get set and tied into existing framing here in San Francisco, and the connection point is where most trouble starts. Our technicians have up to 12 years of experience reading those symptoms and telling you whether it’s a true failure or normal settling.
Which Plant Prefab Models This Applies To
Plant Prefab builds through the LivingHomes and Plant Building System lines, and compatibility questions on a San Francisco project usually come down to how the module joins your existing structure. Identifying the right approach starts with three things: the model spec sheet attached to your project documents, the module dimensions stamped on the delivery paperwork, and a measurement of the existing foundation and framing where the module set. If you don’t have the paperwork, we measure and inspect on site before quoting.
On the OEM-versus-aftermarket decision: Plant Prefab doesn’t sell consumer parts over the counter, so the real choice is between a factory-sourced component and a locally fabricated equivalent. For structural connectors and proprietary glazing systems, factory-sourced is usually the safer call. For finish items like exterior cladding panels or interior trim, a local equivalent often performs identically at a lower cost and a shorter lead time. We tell you which is which before you commit, and the number we quote is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Home Additions & ADU Is Failing
- Diagonal cracking at the module-to-house seam. The tie-in is moving more than the framing allows. In San Francisco, clay soils and slope creep make this worse on hillside lots in Noe Valley and Bernal Heights.
- Doors and windows sticking seasonally. Usually differential movement, not a bad piece of hardware. It signals the module and the original house are settling at different rates.
- Water staining or efflorescence on exterior walls. Flashing and sealant at the roofline joint are failing. Pacific moisture finds every gap, and west-facing walls take the most rain.
- Gaps opening at interior baseboards or ceiling joints. Settlement at the foundation-to-wall junction. Worth checking early, because smaller corrections are far cheaper than waiting.
- Uneven or bouncy floors in the new space. Support and load transfer. This is the one to look at soonest, since floor movement tends to escalate rather than settle back down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed home additions in San Francisco run $53,100 to $153,400. ADU construction runs $106,200 to $259,600, and garage conversions run $35,400 to $94,400. The range depends on square footage, foundation work, whether the lot is on a slope, and how much of the connection to the existing house needs rebuilding.
We quote parts and labor separately so you can see exactly where the money goes. Foundation and seismic detailing, permit and inspection, module tie-in and waterproofing, and finish repair are all spelled out as line items. Permit fees and the city inspection process are real costs here and we don’t hide them in a lump number. Everything we install is covered by our 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. The number you see is the number you pay.
DIY or Call Us?
An owner can safely check cosmetics: note where cracks appear, photograph the seam gaps, test whether doors stick the same way in wet and dry months, and confirm the model paperwork is on hand. That information is genuinely useful to us.
Where DIY goes wrong is anything structural or weatherproofing. Moving a load-bearing connector, re-flashing a roof joint, or adjusting foundation support is where small mistakes turn into five-figure repairs. On a project this size, the honest answer is to let a trained crew handle the tie-in and waterproofing. Call us at (866) 320-2646 and we’ll tell you what we’re seeing and what it should cost before any work starts.
FAQs
Decades, if the foundation, tie-in and flashing are done correctly. The structure isn’t usually the failure point. The connection to the existing house and the exterior waterproofing are, especially in a city where winters bring steady rain and hillside soil keeps moving. We inspect during the build so those details survive.
Often yes. Cracking at a seam, seasonal sticking doors and localized water intrusion are frequently repaired without touching the main structure. The two things we can’t shortcut are foundation problems and soaked framing, since those have to be corrected at the source before any cosmetic fix will hold.
A repair on the connection point may take a few days. A full addition or ADU in San Francisco takes several weeks from site prep to final walkthrough, and permits with the city add time on top of that. We give you a realistic schedule in the written estimate, not an optimistic one that leaves you chasing us.
We order factory components through Plant Prefab’s spec lines where the part is proprietary, and fabricate locally where an equivalent performs the same. We’re independent of Plant Prefab, so we match the part to your model and document choices before ordering. That keeps lead times honest and keeps you from paying factory prices on a part that doesn’t need them.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.