Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Plant Prefab Windows & Doors: The San Francisco Owner’s Guide
We install and service Plant Prefab-compatible windows and doors for San Francisco homeowners, with full window replacement typically running $5,310 – $17,700 and impact window installation at $9,440 – $29,500 depending on unit count, glazing, and frame type. Plant Prefab is a custom prefabrication company whose factory-built homes use specific unit sizes and mounting details, so unit matching comes before anything else. Most San Francisco owners discover a problem the same way: a window that won’t close flush, fogged glass between panes, a sticky slider on a fog-heavy Pacifica-side afternoon, or water tracking in during the first big winter storm. We’re an independent service provider and not affiliated with Plant Prefab.
Key Takeaways
- Plant Prefab’s modular construction means off-the-shelf sizes rarely fit; measure and identify the unit first.
- Fogging is the most common failure, usually the seal, not the glass itself.
- Coastal San Francisco salt air and marine fog accelerate hardware corrosion and gasket shrink.
- All work is covered by our 730-Day Done Right Promise, with upfront pricing and no surprises.
Which Plant Prefab Models This Applies To
Plant Prefab builds across several residential lines, from single-family panelized homes to multifamily modular units, and the window and door schedules differ by line and by the architect’s specification on each project. That means the correct replacement part depends on what was actually installed, not on the Plant Prefab name alone. Before ordering anything, we find the identification tag. It’s usually on the frame’s hinge side or the top of the jamb, and it carries the manufacturer, series, and sometimes a date code. Many Plant Prefab units are built around Marvin or Andersen glazing packages, but we verify the exact unit rather than assume.
Second step is a real measurement: frame opening, glass visible area, and sill-to-head height, not just a tape reading across the middle. Factory-built homes are dimensionally consistent, so a replacement that matches the original spec goes in cleanly. When the OEM badge is missing or the original series is discontinued, that’s where our curated brand partnerships matter. We can match a quality aftermarket equivalent from Andersen or Marvin to the original opening and finish. Hardware like handles, hinges, and weatherstrip should stay OEM-spec or exact-match aftermarket; glass and frame usually leave more room. We also work with KraftMaid, Cambria, and Silestone on interior finish work that ties into a window or door replacement project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Plant Prefab Windows & Doors Is Failing
- Fog or condensation between the panes. That’s a failed insulated glazing unit seal, not weather. The glass isn’t necessarily broken; the seal that keeps moisture out has let go, and the unit needs replacing or reglazing.
- Water staining or softness at the interior sill. Usually a failed perimeter seal or flashing detail where the unit meets the wall. In San Francisco’s marine climate, water finds gaps fast and rot follows.
- A window or door that won’t latch or close flush. Often the frame has shifted or the hardware has loosened. Left alone, it lets air and moisture in and accelerates the failure.
- Stiff sliders and sticky hinges. Salt air corrodes rollers and tracks, and gaskets shrink in the fog-to-sun cycle. This is the most common hardware failure in coastal San Francisco homes.
- Drafts and rising energy bills. Weatherstrip flattening and seal failure let conditioned air escape. A cold spot near a window is a tell.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Francisco installed pricing runs $5,310 – $17,700 for window replacement and $9,440 – $29,500 for impact window installation. The range is driven by unit count, frame material, glazing type, and whether the wall opening needs repair or flashing work. Individual door swaps price lower; a full opening replacement on a modular wall prices higher. You get a line-item quote covering the unit, hardware, labor, and disposal, so you can see exactly what’s driving the number.
On a failed Plant Prefab window or door, upfront pricing means no surprises: the number you see is the number you pay. All work carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Promotions include 0% financing for 18 months and $1,000 off projects over $10,000, and estimates are free. Most single-unit replacements are completed in a single visit.
DIY or Call Us?
You can safely check and document: run your hand along the frame for drafts, look for fog between panes, test the latch, and photograph the identification tag and label. Don’t pull a window or door out of a modular wall yourself. Plant Prefab units sit in a factory-built envelope where the perimeter seal, flashing, and weather barrier work as a system; getting it wrong during San Francisco’s rainy season means water intrusion and rot behind the wall. Some jobs touch multiple trades, and that’s where a real install goes wrong. Our technicians, background-checked and uniformed, have up to 12 years of experience. Call (866) 320-2646 to schedule your free estimate.
FAQs
How long do Plant Prefab windows and doors last in San Francisco? Most insulated glazing units last 15 – 25 years, and hardware like hinges and rollers often fails sooner in coastal salt air and fog. If a window is fogging or a door is sticking, that’s your signal, not a calendar date. Call (866) 320-2646 for an exact quote; estimates are free.
Can a failed Plant Prefab window be repaired instead of replaced? Usually the glass unit can be reglazed without swapping the whole window, and hardware can be replaced on its own, which keeps cost down. If the frame or the wall seal has failed, full replacement is the honest answer. Call (866) 320-2646 for an exact quote.
How long does a window or door swap take? A single unit typically goes in on a scheduled visit, often same visit for the opening, with cured sealing completed that day. Larger or multi-unit jobs take longer. Call (866) 320-2646 for an exact timeline and free estimate.
How do you source a replacement part for my Plant Prefab unit? We identify the unit from its tag and measure the opening, then match to OEM specification or a quality aftermarket equivalent from a brand partner like Andersen or Marvin. No part number, no guesswork. Call (866) 320-2646 for an exact quote.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.