A Groundwork company - serving San Francisco, CA

James Hardie Kitchen Remodeling in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Kitchen Remodeling: The San Francisco Owner’s Guide

James Hardie kitchen remodeling installed in San Francisco runs $16,520 – $53,100 for a full project, and most starts happen within two to three weeks of an approved written quote. The work typically pairs James Hardie fiber-cement wall board and trim with the cabinetry and stone lines we also install: KraftMaid, Cambria, and Silestone. Owners usually call us after a different failure points back to this one – bubbling paint on a wall where the kitchen sits below a bathroom, or a soffit that reads soft when you press it.

Call (866) 320-2646

San Francisco has decades of layered permits and added bathrooms above kitchen walls. A slow leak from one of those is the most common reason a James Hardie surface in the kitchen starts failing long before its expected life.

Which James Hardie Models This Applies To

We’re an independent service provider and not affiliated with James Hardie. That matters here because James Hardie makes fiber-cement siding and trim, not kitchen cabinets or countertops. What we install in a kitchen is James Hardie board where a kitchen wall meets an exterior wall, where a soffit or header sits, or where a chase was opened for a remodel. The product lines that come up are HardiePlank lap siding, HardiePanel vertical siding, and HardieTrim boards. The part number is printed on the back face of each board, and if the board is already installed, the number is only readable when a section is removed.

Identify your existing board by thickness and texture. HardiePlank runs 5/16 inch thick in the thinner profiles and 7/16 inch in the thicker ones, and the finish is a factory-baked color, not a field-painted one. If your board is painted and peeling in sheets, it may not be James Hardie at all. On the OEM-vs-aftermarket question: there is no aftermarket version of Hardie board that matches the warranty, so we don’t substitute one. We source the correct product, and for cabinetry and stone we work with KraftMaid, Cambria, and Silestone because those brands publish spec sheets we can verify against your opening measurements.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Kitchen Remodeling Is Failing

  • Paint bubbling or peeling in sheets on a kitchen wall. Water is getting behind the board from above or from a failed window seal. The paint failure is the symptom, not the cause.
  • Soft or spongy spots when you press the wall or soffit. The fiber-cement has absorbed moisture over a long period. Fiber-cement is water-resistant, not waterproof, and it fails once water sits against it for months.
  • Visible gaps at butt joints or where board meets trim. Thermal movement from San Francisco’s fog-season temperature swings opens caulk lines over time. Left alone, water tracks in.
  • Dark staining or green-gray film near the bottom of a wall. This is mold or algae feeding on trapped moisture. In San Francisco’s ocean-air climate, north-facing walls and walls in the Sunset and Richmond districts collect it faster.
  • A kitchen remodel quote that skips the wall assembly. If a contractor prices cabinets and counters without addressing failing board behind them, the problem resurfaces within a few years.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Full kitchen remodel in San Francisco: $16,520 – $53,100 installed. Small kitchen remodel: $10,620 – $23,600. Cabinet installation: $4,720 – $15,340. Countertop installation: $2,360 – $7,670. Backsplash installation: $945 – $2,950. Kitchen island installation: $3,540 – $11,800.

The range is driven by how much exterior wall assembly has to be opened, whether the soffit or a header is involved, and cabinet and stone selections. Every quote is line-item and written, and it includes the parts, the labor, and the disposal. The number you see is the number you pay, and the work is covered by our 730-Day Done Right Promise. We pull the permits the job needs.

DIY or Call Us?

You can safely check a few things yourself: press along the kitchen wall and soffit for soft spots, look at joints and window seals for gaps, and note where paint is bubbling. That tells you whether there’s a moisture problem worth pricing. What goes wrong on DIY is the wall assembly itself. Cutting out and replacing a section of Hardie board means matching thickness and profile, flashing the joint correctly, and finding the actual leak source. If the leak traces to a bathroom above, the kitchen work won’t fix it. And any electrical or plumbing inside that wall is a stop-and-call situation.

Call (866) 320-2646 for a free estimate. A live person answers, 24/7.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch