Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Mill Valley
If you live in Mill Valley, you already know that a driveway here is rarely just a flat rectangle of concrete. On hillside lots up Sycamore and Edgewood, the driveway is often the only level ground on the whole parcel, which means grading, drainage, and edge restraint carry as much weight as the pavers themselves. We build Driveway & Pavers work for Mill Valley homeowners with that reality baked into the scope from the first walkthrough. Our technicians have up to 12 years of experience, projects run under our 730-Day Done Right Promise, and pricing is upfront before the first shovel hits dirt. Call (866) 320-2646 and a live person will pick up, day or night, to set up a free estimate.
Why Groundwork Construction Co. of San Francisco Is Mill Valley’s Preferred Driveway & Pavers Company
Mill Valley isn’t a market where a flat-lot playbook survives contact with the ground. Homes here sit on tight tree-lined lanes off Miller Avenue and Throckmorton, on split-level 1950s ranchers climbing the hillsides, and on early-1900s redwood and shingle cottages near downtown with foundations older than anyone’s memory of them. The best driveway and paver work we do in town is planned around real slope, real runoff, and a permit path that runs through county and city review rather than a single rubber stamp.
Mill Valley customers come to us because the estimate is line-itemed and the number on the page is the number they pay. Upfront pricing, no surprises. That matters on projects where an unforeseen drainage run or old unpermitted slab can quietly mushroom a budget if nobody scoped it honestly up front. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. And the crew that shows up is background-checked and in uniform, not an unmarked van that never returns your calls. Whether it’s a paver apron in Homestead Valley or a full concrete replacement in the 94941 hills, we treat the job like it’s going to be inspected (because it will be).
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Mill Valley
Our full Driveway & Pavers team handles the whole range of hardscape work, but the four services below come up most often in Mill Valley and cover the bulk of what we build here.
Paver Driveways
Pavers are the workhorse choice on Mill Valley hillside lots because they flex with seasonal ground movement in a way monolithic concrete can’t, and they can be reset instead of ripped out. We set them over an excavated, re-compacted base with a pinned edge on every curve and steep apron, which is exactly the detail that fails inspection sign-off when it’s skipped. A paver driveway in Mill Valley typically runs $7,000 – $18,000 depending on square footage, base prep, and drainage work.

Concrete Driveways & Concrete Work
Concrete is still the go-to for flatter lots and lower budgets, but in Marin’s wet-winter, dry-summer swing it needs real control joints, proper subgrade, and an outlet for hillside runoff or it cracks along the seams by the second spring. We pour, finish, and detail it to handle that cycle rather than ignore it. Concrete driveway installation in Mill Valley generally lands between $4,500 and $12,000.

Asphalt Driveways & Resurfacing
Asphalt gives a smoother ride and a lower entry price, and it’s a practical fit for longer rural-style access lanes off the hillside streets where a concrete pour gets complicated. Resurfacing an existing asphalt drive can extend its life for years if the base underneath is sound. Asphalt driveway paving in Mill Valley runs $3,500 – $9,000.

Driveway Repair & Replacement
When the paver apron at your garage has settled differentially and the base was compacted against an old unpermitted slab, repair is the honest answer, not a fresh skim coat. We open the excavation, check subgrade, and rebuild from the bottom. Driveway replacement in Mill Valley runs $5,000 – $14,000, and getting the scoping right up front is what keeps a repair from becoming a surprise change order. We also handle sealing ($250 – $700) and paver patios ($3,500 – $11,000) for homeowners extending the same materials into the backyard.
Trusted Brands We Service in Mill Valley
The hardscape materials that hold up on a Mill Valley lot are the ones engineered for slope and weather. We work with a curated set of brand partners across every trade, including Belgard for paver systems and hardscape components, and GAF and CertainTeed where a project folds in roofing, decking, or accessory structures. We don’t carry parts or stock locally; we specify, order, and schedule materials to your site, and because the brands we work with are well-supplied, most product lead times stay short. That means you choose based on quality and fit for the site, not just what happens to be on a truck that day.
See the difference
Before
After
Before
After
Before
AfterCommon Driveway & Pavers Problems We See in Mill Valley Homes
- Pavers heaving and shifting after wet winters. When the base is compacted without a drainage outlet on a sloping lot, seasonal runoff pools under the driveway and pushes pavers up out of grade. By the time you see the first rocker, the base underneath has usually already failed.
- Settled aprons against old unpermitted slabs. A lot of Mill Valley homes have had additions or slab work done over the decades without documentation. When a new paver apron ties into that old concrete, differential settlement shows up fast.
- Narrow single-lane access splitting material hauls. Tree-lined hillside streets won’t take a full-size delivery truck with no turnaround, so loads get broken into smaller deliveries, which adds cost and stretches out the schedule.
- Edge creep on curves and steep aprons. Without a properly pinned edge restraint, paver edges walk on curves and grades, and that failure shows up as a punch-list item after the first rainy season.
Pricing for Driveway & Pavers in Mill Valley, CA
Here’s the honest picture. On Mill Valley hillside lots, a driveway is often the only level buildable area on the parcel, so the impervious-surface limit gets calculated against the whole slope, not just the footprint. That can push a paver driveway into engineered drainage or pervious paver territory where a flat-lot driveway a couple of miles away would sail through. The numbers below are what these jobs actually run in Mill Valley:
| Service | Typical Mill Valley Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
What moves the number: slope, how much base excavation and re-compaction the subgrade needs, whether an underdrain gets added, and whether access forces smaller material loads. We scope all of that before we quote so the estimate you get is the one that holds. Call (866) 320-2646 for a free estimate and a written line-item breakdown. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
We Also Serve Cities Near Mill Valley
Mill Valley is our home base on this page, but we build driveway and paver work across the surrounding communities too: Tamalpais-Homestead Valley, Corte Madera, Larkspur, and Tiburon. If you’re nearby and weighing a paver driveway, a concrete replacement, or a drainage fix on a sloping lot, we can scope it in the same way we handle Driveway & Pavers in Mill Valley proper. The site-specific engineering matters just as much a few miles down the road.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Mill Valley
Often yes. Because Mill Valley’s hillside lots treat the driveway footprint against the whole parcel’s slope and impervious-surface limit, a paver driveway frequently triggers stormwater review or engineered drainage requirements, and some projects fall into design review depending on scope. We pull the permits and manage the review process so you’re not chasing the city yourself, and we scope the engineering into the quote up front rather than discovering it mid-job. Call (866) 320-2646 to talk through your specific lot.
It can. Marin’s wildfire prevention rules affect exterior materials broadly, and while pavers themselves are non-combustible, the ordinance also touches related details like edge conditions and accessory structures near the drive. Neighbors who notice everything here also means the standard for fire-resistant detailing is real, not a formality. We factor that into the material spec before quoting. Call (866) 320-2646 for a scoped estimate.
Slope is the whole answer. On a hillside lot, the base excavation is deeper, the subgrade needs more re-compaction in lifts, drainage often requires an engineered underdrain tied to a daylight or drywell, and narrow single-lane access splits material into smaller loads that add cost and schedule days. The impervious-surface limit gets calculated against the whole slope too, which can push the spec toward pervious pavers. Those are the line items flat-lot pricing leaves out. Call (866) 320-2646 and we’ll walk you through your lot’s specifics.
Your written line-item quote should spell out base excavation depth, drainage scope, edge restraint detail, material spec, permit responsibility, and the change-order process. This is the biggest reason a Mill Valley paver job turns into a fight: an original scope that left drainage out of the write-up, so the repair reads as an extra. We put it all in writing before anything breaks ground, backed by our 730-Day Done Right Promise. Call (866) 320-2646 for a free, itemized estimate.
Yes, if it’s designed for it. Pervious pavers and a properly tied underdrain can give seasonal hillside runoff somewhere to go instead of pooling under the base, which is exactly what causes the heaving and shifting we see after wet winters. The key is that the drainage is engineered into the scope from day one, not bolted on after the base fails. Call (866) 320-2646 to schedule your free estimate and get a scoped plan for your lot.
Ready to stop guessing about your driveway and get a real number? Groundwork Construction Co. has been building in the Bay Area since 2014, and our technicians bring up to 12 years of experience to every paver, concrete, and drainage project. Calls are answered by a live person 24/7, quotes are itemized and upfront, and every project is covered by our 730-Day Done Right Promise. From foundation to finish line, built to last, backed in writing. Call (866) 320-2646 today to schedule your free estimate in Mill Valley.
Written by the team at Groundwork Construction Co.