Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in San Francisco: What It Takes and What It Costs
Metal roofing in San Francisco typically runs $17,700 to $47,200 for a full residential installation, and most jobs take 2 to 4 weeks of on-site work once permits clear. The wide spread comes down to roof size, whether old layers get torn off and redecked, and which panel system you pick. San Francisco’s housing stock – a lot of it Victorian and Edwardian wood-frame with steep pitches and tight lots – adds real labor to the measure, tear-off, and flashing stages. Call (866) 320-2646 for a free on-site estimate and a written line-item quote.
How We Install Metal Roofing, Start to Finish
Metal roofs aren’t a one-day swap. The sequence below is what a real San Francisco job looks like, with the decisions you make at each stage.
Stage 1: Measure, inspection, and permit (week 1)
We measure the actual roof planes, count penetrations, and inspect the decking and structural framing underneath. On older row houses this is where we find out whether the roof can take the new system on the existing structure or whether fastening patterns need adjustment first. Pulling the permit happens in this window – San Francisco permitting is its own process and the timeline depends on scope. You decide at this stage: single panel system versus a multi-piece standing seam, and whether you’re re-roofing over existing layers or doing a full tear-off.
Stage 2: Tear-off and deck inspection (days 1-3 on site)
If you chose full tear-off, the old roofing comes off and we inspect the decking for rot, soft spots, and failed fasteners. On the west side of San Francisco, damp and salt air mean we find more deck rot than the visible roof suggests. You decide at this stage: whether soft deck sections get replaced (we price per sheet) or whether we proceed on solid decking.
Stage 3: Underlayment and flashing (days 3-5)
A high-temp underlayment goes down, then we set the edge metal, drip edges, and all valley and penetration flashing. This stage is where corrosion-resistant hardware matters most – galvanized and stainless fasteners get spec’d here, not the standard galvanized screws that rust fast in marine air. You decide at this stage: whether you want upgraded underlayment or standard, and whether there’s a skylight or vent relocation to work in.
Stage 4: Panel installation (days 5-12, depending on size)
Panels get laid out, cut, and fastened per the manufacturer’s pattern. Steep pitches take longer to work safely and slow the pace, and hillside lots in San Francisco can mean scaffolding staging and limited material drop zones. You decide at this stage: whether to add snow guards or pipe boots now while the crew is up there.
Stage 5: Final inspection and cleanup (days 12-15)
The city inspection happens here, then a final walkthrough with you. We check every fastener, test every penetration, and clean the site. This is also when your written warranty paperwork and the 730-Day Done Right Promise coverage get handed over in writing – no fine print, no asterisks. Every project we run is background-checked, uniformed, and covered by that guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Choices You’ll Make (and What Each One Costs You)
The panel system and finish are where most of the budget swing lives. Here’s the honest trade-off on each.
- Standing seam panels – concealed fasteners, the cleanest profile, and the longest service life. Higher material cost, best suited to low-pitch and high-visibility roofs. This is what most San Francisco homeowners picture when they hear “metal roof.”
- Exposed-fastener panels – lower cost per square foot, quicker install, but the fastener heads are where corrosion starts in coastal air. Fine on a budget-sensitive project if you accept a shorter service window and plan for fastener checks.
- Painted steel versus aluminum – steel with a quality finish holds up well inland, aluminum is the better call near the coast where salt accelerates corrosion on any ferrous metal.
- Finish and color – standard colors cost the least; premium finishes (and GAF or CertainTeed metal systems) add cost but hold their look longer in fog and damp.
- Full tear-off versus re-roof over – tear-off reveals deck problems, so it’s more honest but more expensive upfront.
What Metal Roofing Costs in San Francisco, CA
Most residential metal roof jobs here land between $17,700 and $47,200. The low end is a smaller, simple-pitch roof with exposed fasteners and no deck repairs; the high end is a large, steep, complicated roof with full tear-off, new decking, premium finish, and staging challenges. Here’s what actually moves the number:
- Roof size and pitch – larger area and steeper pitch both add labor and time on the scaffold.
- Existing roof condition – soft decking, multiple old layers, or hidden rot all push the price up.
- Structural work – if the framing can’t take the new system’s fastening pattern, that gets corrected first.
- Panel and finish grade – material choice is the biggest single lever.
- Permit scope – tear-off and structural changes add permit review time.
A written estimate itemizes tear-off, decking, underlayment, flashing, panels, and labor separately, plus permit fees. It does not include things like gutter replacement or skylight swaps unless those are explicitly quoted. Upfront pricing means the number you see is the number you pay – no change orders for work already agreed to. Call (866) 320-2646 for an exact quote on your roof.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco is one of the densest, most historic urban cores in the country, and it’s built on steep hills. That combination changes a metal roof install in ways other cities don’t see. Nearly every project involves a tight lot, a hillside foundation, and a planning review that can run weeks to months before any material lands – a full scope that folds into Roofing in San Francisco, but with metal-specific staging and structural work layered on. The housing stock here swings from 1880s-1920s Victorian and Edwardian row houses with brick foundations to 1950s-70s stucco-over-wood buildings. On the west-side hills, the fog belt and Pacific salt corrode standard fasteners and paint at a fraction of normal lifespan, which is why we spec stainless and galvanized hardware even on small jobs. We see the same failures repeatedly in Noe Valley, the Inner Sunset, and the Richmond: rusted-through fasteners, paint blistering on exposed metal, and soft decking that the last roof hid. Our Roofing service covers the wider category; this page stays on metal specifically.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Metal Roofing Questions in San Francisco
Expect 2 to 4 weeks on site once permits clear, and permit review time is separate. A small, simple roof can finish faster; a steep, hillside, multi-penetration job takes longer. Call (866) 320-2646 for a timeline on your specific roof.
Yes, roof replacement and structural changes require a permit through San Francisco’s building department. We pull the permit and pass the inspection as part of the job, so you’re not chasing paperwork. Call us for details on your address.
Usually yes, as long as the framing can take the fastening pattern – and that’s exactly what the day-1 inspection confirms. If framing needs correction, we price it upfront before any work starts.
Most jobs run $17,700 to $47,200, with the number driven by size, pitch, deck condition, and panel grade. Call (866) 320-2646 for an exact written quote – estimates are free.
Every metal roofing project gets the 730-Day Done Right Promise on workmanship, plus the manufacturer’s material warranty on the panels and finish. You get both in writing at the final walkthrough. Homeowners often pair this with Window Replacement in San Francisco or Impact Windows & Doors in San Francisco while the roof is open. We serve all of San Francisco and nearby areas.
Get a Free Metal Roofing Estimate in San Francisco
Call (866) 320-2646 for a free on-site estimate on metal roofing in San Francisco. A live person answers 24/7 – no voicemail, no waiting until Monday. We’ll measure the roof, walk the decking with you, and hand over a written line-item quote with upfront pricing and no surprises. Most estimates take about an hour, and financing is available at 0% for 18 months.
Written by the team at Groundwork Construction Co.