Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Emergency & Storm Damage in San Francisco: What It Costs and How Fast It Gets Handled
Emergency and storm damage roof repair in San Francisco typically runs $470 – $2,125 for the repair itself, with larger storm-driven jobs (torn-off flashing, saturated decking, interior leaks) landing at the top of that band. The work usually starts with a same-day or next-morning protective tarp, a moisture inspection on day one, and permanent repair scheduled once we know how far the water traveled. Call (866) 320-2646 and a live person answers, any hour, any day.
What makes storm damage here different from most of the country: the wind-driven rain off the Pacific finds every failed fastener and dried-out sealant on a wood-frame Edwardian, and salt air has already been quietly weakening that hardware for years before the storm arrives.
How a Storm Damage Job Actually Runs, Day One Through Done
Every storm call follows the same five stages. What changes is how much of the structure the water reached before the leak showed up inside.
Stage 1: Emergency stabilization (same day)
We tarp the affected area, secure loose flashing or lifted roofing, and stop active water entry. This is a protective step, not a repair. You decide whether to file an insurance claim now or wait until we’ve scoped the damage, and we’ll tell you which path makes sense based on what we find.
Stage 2: Moisture and structure inspection (day one to day two)
We check decking, rafters, insulation, ceiling drywall, and any wall cavity the water reached. On hillside and row-house stock this matters more than inland, because water that gets behind a party wall or under an eave has fewer places to drain. You get a written scope of what’s wet, what’s sound, and what has to come out.
Stage 3: Selective demo and drying (day two to day four)
We remove only the damaged material, set drying equipment where it’s needed, and confirm moisture readings before anything gets closed back up. Skipping this step is the single most common reason a “fixed” leak comes back in the next rain.
Stage 4: Permanent repair (day four to day ten, depending on scope)
Flashing gets rebuilt, underlayment and roofing replaced to match, fasteners upgraded to corrosion-resistant spec, and penetrations resealed. On most jobs of this size the permanent repair is finished in one visit once the material’s on site. You decide on material grade here, and the trade-offs are covered below.
Stage 5: Final inspection and warranty sign-off (within 48 hours of completion)
We water-test the repair, walk the interior to confirm no staining or moisture return, and hand over the written warranty. Every storm damage project we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Decide How a Storm Repair Holds Up
The repair method is largely dictated by the damage. The materials and hardware are where you actually have a say, and on a coastal city they matter more than the labor.
- Standard vs. corrosion-resistant fasteners and flashing: Galvanized or stainless fasteners and flashing cost more up front but are the difference between a repair that lasts and one that fails at the next storm. On the fog-belt and ocean-facing blocks, we spec corrosion-resistant hardware as the default and don’t apologize for the price.
- Roofing material grade: A like-for-like patch blends in and costs the least; a GAF or CertainTeed architectural shingle system gives a longer service life and a cleaner match on the repair area, at a higher material cost. We’ll quote both.
- Ventilation and moisture control: Adding ridge or intake ventilation during the repair is inexpensive next to opening the roof again later. San Francisco’s persistent damp makes this worth doing while the roof is open.
- Interior scope: Drywall, insulation, and paint repair are priced separately from the roofing. You can sequence them or bundle them, and we’ll show the line items either way.
One more piece worth flagging while the roof is open: if the storm exposed failing windows or doors, homeowners often pair this repair with Impact Garage Doors in San Francisco or Custom & Geometric Windows in San Francisco rather than open the envelope twice.
What Emergency & Storm Damage Costs in San Francisco, CA
Storm damage roof repair runs $470 – $2,125 for most jobs. That range covers everything from a small flashing reseal to a section of decking and roofing rebuilt after a serious leak. If the damage is extensive enough to warrant a full re-roof, that’s a separate $9,440 – $23,600 conversation, quoted with the line items broken out.
Four things push a job toward the top of the repair range:
- How far the water traveled. A leak that soaks insulation and ceiling drywall costs two to three times a roof-only repair.
- Roof access and pitch. Steep hillside lots and tight row-house setbacks slow the work and add labor.
- Existing condition. Older decking, failed underlayment, or corroded flashing that’s been patched before extends the scope.
- Material match. Matching discontinued shingles or tile costs more than a clean like-for-like with current product.
Every written estimate lists roofing materials, labor, disposal, and any interior repair separately. What typically isn’t included: structural framing beyond the immediate repair, permit fees if one is required, and any damage found only after demo begins. We price those in writing before we touch them, and the number you see is the number you pay. No-hassle upfront pricing, no change-order surprises.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
The building stock here is the whole story. The dense mix of 1880s – 1920s Victorian and Edwardian wood-frame row houses, brick foundations, and 1950s – 70s stucco-over-wood buildings means we’re almost always working on older assemblies with layers of previous patches. On a steep lot in Noe Valley or the hills above the Mission, water that gets behind flashing has a short run to the ceiling below, and the party-wall construction on row houses means a leak rarely stays contained to one address.
The marine fog and salt air off the Pacific and Bay accelerate corrosion on fasteners, hinges, rollers, tracks, and flashing, which is why repairs on the west-side hills get corrosion-resistant hardware as standard. Contractors who work here learn to spec galvanized flashing and stainless fasteners even on small jobs, because salt air eats standard fasteners and paint within a fraction of their normal lifespan.
Permitting is its own reality. San Francisco’s discretionary review process and neighborhood design review can stretch a project timeline well beyond what the work itself takes, and any storm repair that touches structure or the exterior envelope has to be scoped in that context. We pull the permits and pass the inspections; you don’t chase paperwork. When the repair is part of a full Roofing in San Francisco scope, we sequence it so the storm fix doesn’t get redone by the bigger job later. For the wider program and materials, our Roofing service covers the ground, and we handle properties all across San Francisco, including the fog-belt neighborhoods where corrosion shows up first.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Emergency & Storm Damage in San Francisco
Most storm damage repairs are stabilized the same day you call and permanently repaired within one to two weeks, depending on how much interior material has to be replaced and whether a permit is needed. The tarp and inspection happen on day one; the permanent fix usually lands inside a week once materials are ordered. Call (866) 320-2646 and we’ll scope it against your property.
Small repairs and flashing fixes generally don’t require a permit; repairs that replace a substantial share of the roofing, alter structure, or change the exterior envelope usually do. San Francisco’s permitting process adds time to any job that touches structure, and we build that into the schedule before we start. We pull the permits and pass the inspections, and you’ll know which path applies before work begins.
Yes, in most cases. Storm damage is almost always localized to the point where wind-driven rain found a failure: flashing, a lifted shingle, a failed penetration, or the seam where a roof meets a wall. We remove only the damaged section, repair it, and match the surrounding material so the repair blends. Full replacement only comes up when the inspection shows the assembly is already past its service life, and that’s a separate quote for the $9,440 – $23,600 range.
Storm damage roof repair typically runs $470 – $2,125 in San Francisco, with the low end being a flashing reseal and the high end being a section of decking and roofing rebuilt after a serious leak. Interior drywall and insulation repair are quoted separately. Call (866) 320-2646 for an exact number; the estimate is free and the pricing is line-itemed.
All storm damage repairs we do are covered by the 730-Day Done Right Promise: if the workmanship fails within that window, we make it right at no added labor cost. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing before we start. Material warranties come from the manufacturer on brands like GAF and CertainTeed, and we register those on your behalf. Background-checked, uniformed technicians handle every job.
Get a Free Storm Damage Estimate in San Francisco
If a storm has left you with a leak, a lifted roof section, or water where it shouldn’t be, call (866) 320-2646 and a live person will pick up, any hour, any day. We’ll schedule a free on-site estimate, document what’s wet and what’s sound, and hand you a written line-item quote with no-hassle upfront pricing. If you’re planning a larger project around the repair, ask about $1,000 off projects over $10,000 and 0% financing for 18 months. From foundation to finish line, one contractor, backed in writing.
Written by the team at Groundwork Construction Co.