Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in San Francisco: What the Job Actually Involves
Window Installation in San Francisco runs $5,310 to $17,700 for most homes, and a typical 6-to-10 window project takes two to four working days once materials are on site. The job means pulling the old unit, checking and repairing the rough opening, flashing it correctly, setting the new window plumb and square, insulating and sealing, then trimming and testing operation. For an exact number on your building, call (866) 320-2646 and we’ll schedule a free on-site estimate.
How a Window Installation Goes, Stage by Stage
Every project moves through the same five stages. What changes is the building, and in San Francisco that’s usually the hard part.
Stage 1: Measure and spec (day 1, about 60 to 90 minutes). We measure every opening, check for out-of-square frames, and look at what’s behind the trim. On Victorian and Edwardian row houses in places like the Mission or Noe Valley, that means finding the original redwood framing and whatever a previous owner added. You decide the window style, material, glass package, and whether we keep the existing trim or replace it. Decisions on sizing and lead time get locked here because factory orders are hard to change later.
Stage 2: Order and permit (1 to 3 weeks). Windows are ordered to spec. If the scope touches structural framing or changes an opening, we pull the permit and schedule inspection before anything gets covered up. You’ll get a written line-item quote showing product, labor, flashing, and disposal as separate lines so nothing is a surprise later.
Stage 3: Prep and protection (half a day). Floors get covered, furniture shifts, and we set up exterior access. On steep hillside lots or tight alley-fronted buildings, this is where access planning pays off. Staging a crew and materials on a narrow slope is a real cost and we plan for it up front rather than discovering it mid-job.
Stage 4: Remove, repair, install, flash (1 to 3 days depending on count). Old units come out, rotted framing and sill gets repaired, the opening is squared, then new windows go in, get shimmed, leveled, and flashed. Waterproofing at the head and sill is where most failures start, so this stage gets the most attention. Every window is tested for smooth operation before we move to the next.
Stage 5: Seal, trim, walkthrough (half a day). Interior and exterior get sealed and trimmed, and we do a final walkthrough with you. Any punch items get written down and scheduled. The work is covered by the 730-Day Done Right Promise, so if something isn’t right two years from now, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Window Options You’ll Choose Between
These are the decisions that actually change your result, not the marketing fluff.
- Vinyl: The budget-friendly choice, generally the low end of our $5,310 to $17,700 range. Holds up in damp coastal air without paint, but can’t be painted and looks heavier than wood.
- Wood-clad (aluminum or fiberglass exterior): Warm interior, low-maintenance exterior. A great fit for period homes where you want the look of wood without refinishing every few years.
- Fiberglass: Strong, stable, and the one to pick on the fog-heavy west side where temperature swings and moisture punish lesser materials.
- Double vs. triple pane: Double-pane is the standard call for most San Francisco homes. Triple adds cost and weight, and rarely pays back in our mild climate.
- Brands and glass packages: We work with Andersen, Marvin, ECO Window Systems, and ViewLux depending on the job. The right pick depends on whether you’re matching existing trim, chasing a specific U-value, or staying under a budget line.
- Configuration: Single-hung, casement, awning, or fixed. Casements seal tightest but swing out into walkways, which matters on tight lots.
What Window Installation Costs in San Francisco, CA
Window Installation in San Francisco typically lands between $5,310 and $17,700 for a full project, and a single replacement window runs roughly $900 to $1,800 installed depending on what’s behind the wall. Impact-rated units climb higher, from $9,440 to $29,500, if you’re upgrading for that reason.
Five things push a job toward the low or high end:
- Head count. Ten windows cost more than three, but per-unit price drops.
- Condition of the rough opening. Rotted framing, hidden water damage, or a brick foundation that needs repair adds labor hours.
- Change of opening size. Resizing means framing and potentially a permit and inspection.
- Material and glass grade. Vinyl to wood-clad is a real jump, and triple-pane adds more.
- Access and staging. Hillside lots, tight alleys, and tall buildings slow everyone down and cost more to stage.
Your written estimate will itemize product, labor, flashing and sealants, disposal, and any permit fees. It won’t include things outside the window scope, like stucco repair beyond the opening or interior paint. Upfront pricing, no surprises: the number we quote is the number you pay. Call (866) 320-2646 for an exact figure on your building.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
Almost every window project here meets one of three things: a Victorian or Edwardian row house from the 1880s to 1920s with original redwood framing and a brick foundation, a stucco-over-wood residential hotel from the 1950s to 70s, or a downtown high-rise with its own HOA rules. Each demands different flashing, different trim, and a different conversation with the building department.
Permits matter. San Francisco planning is slow and discretionary, and projects that touch the exterior envelope on a historic building can wait months for review. We pull permits and pass inspection rather than skip that step, because you don’t want an open permit on your title when you sell.
The climate is the other half. Marine fog off the Pacific and salt air from the Bay corrode standard fasteners and flash within a couple of years on west-side hills, so we spec stainless hardware and galvanized flashing even on small jobs. Waterproofing at the sill and head is not optional here; it’s the difference between a window that lasts twenty years and one that leaks in five. Homes in Outer Sunset, the Richmond, and up the hills on Twin Peaks show this fastest.
If your project also involves refreshing the yard, homeowners often pair window work with a Wood Fence in San Francisco or a Chain Link Fence in San Francisco. And if this is one piece of a larger exterior update, it’s worth reading our Windows & Doors in San Francisco page for the broader scope. We cover the full breadth of our Windows & Doors work across San Francisco, and this page is the deep dive on the installation itself.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Window Installation in San Francisco
Most projects run two to four working days on site, plus one to three weeks of factory lead time before that. Complex hillside or historic buildings can extend the schedule if structural repair or planning review shows up mid-job. Call (866) 320-2646 to get a realistic timeline for your building.
Straight replacement in the same opening usually doesn’t require a permit. Anything that changes the size, alters the wall, or touches structural framing usually does, and planning review can be slow. We’ll tell you up front what applies to your project.
Yes, in almost every case. Window openings sit in the wall assembly and don’t touch plumbing or wiring unless a previous remodel ran something where it shouldn’t. If we find that, we flag it in the estimate before proceeding.
Most full projects land between $5,310 and $17,700, with a single window installed at roughly $900 to $1,800. Material, glass package, and rough-opening condition are the biggest swings. Call (866) 320-2646 for an exact figure; estimates are free.
Every install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturers also carry their own product warranties on glass and frames, and we’ll walk you through how those stack.
Get a Free Window Installation Estimate in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate for Window Installation in San Francisco. We’ll measure every opening, talk through your options, and hand you a written line-item quote with no change-order games. A live person answers, day or night, and you’ll also get our free design consult. If your project qualifies, you can take $1,000 off projects over $10,000 or use 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco.