Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Garage Doors in San Francisco: What the Job Actually Involves
Impact garage doors in San Francisco typically run $4,200 to $9,800 installed, and most single-bay replacements wrap up in one to two days once the door is on site. You’re buying a wind- and impact-rated sectional door with reinforced hardware, a rated track system, and a modern opener with rolling-code remotes. Call (866) 320-2646 and we’ll walk your opening and give you a written, line-item estimate before anything is ordered.
Tearing out the old door and hanging the new one, stage by stage
Here’s the honest sequence. It’s not glamorous, but knowing what happens when keeps you from getting surprised mid-job.
- Day 1, morning: measure and verify. We confirm the rough opening, headroom, side clearance and how the door meets the ceiling. In San Francisco’s tight alley-load garages, side clearance is often the deciding factor on which door and track system will even fit. You decide the door model and glazing at this stage, before we order.
- Day 1, afternoon: demo and prep. The old door, springs, tracks and opener come out. We inspect the framing and header for rot, which is common on fog-belt homes, and check that the opening is square. If the framing has moved or rotted, that gets flagged and quoted before we proceed.
- Day 1 or 2: track and hardware install. New track, hinges, rollers and reinforced hardware go in. On impact-rated doors, the reinforcement and rated fasteners are non-negotiable because the door is designed to transfer load into the frame. This is a two-person job and takes most of a day.
- Day 2: hang the door and set the springs. The panels go in, springs get tensioned and balanced, and the door gets cycled repeatedly to confirm it travels smoothly and sits level. You’ll see it open and close before we call it done.
- Day 2: opener, remotes and final walkthrough. The opener and rolling-code remotes get programmed and tested. We run the safety reverse, confirm the photo-eye alignment, and walk you through the operation and warranty paperwork.
Two things you’ll need to decide early: the door model and material (which affects the lead time), and whether you want an opener upgrade or just a swap. Order the door before demo day or the job stalls waiting on delivery.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The real choices: material, insulation and hardware
- Steel vs. aluminum: Steel is the go-to for impact-rated doors because it holds up to wind load and takes a rated finish. Aluminum is lighter and resists the salt air better, but costs more and dents more easily. On the west side of the city, near the ocean fog, aluminum or a well-coated galvanized-steel door holds its finish longer.
- Insulated vs. non-insulated: Insulated panels cut street noise and hold temperature in a garage that doubles as a workshop or laundry room. Non-insulated is cheaper and fine for a car-only space.
- Glass and glazing: Impact-rated glazing in the top section adds light but costs more and needs to match the rating of the door. A good option on a dark alley garage; a poor one if the door faces afternoon sun.
- Opener and remotes: Rolling-code remotes and a modern opener with battery backup are the upgrade most San Francisco owners want, because they add a layer of security against code-grabbing. Standard openers are just that. Backup batteries matter during PG&E shutoffs.
- Finish: Standard factory color or a custom-matched finish to work with the building’s trim. Custom finish adds cost and lead time.
What Impact Garage Doors cost in San Francisco, CA
Most single-bay impact garage door installations land between $4,200 and $9,800. That’s the installed number, not the door alone.
What pushes a job toward the high end:
- Size and count: A double-bay or oversized door uses more material and more reinforcement, and a two-door job roughly doubles the door and hardware cost.
- Opening condition: Rotted or out-of-square framing on an older Victorian or Edwardian garage means carpentry before the door goes in.
- Hardware and opener grade: A battery-backup opener and rolling-code remotes add to the total; a basic swap keeps it down.
- Material: Aluminum and custom finishes run higher than standard steel.
- Access: A tight alley or a steep driveway means more careful handling and sometimes a longer day, which can add labor.
A written estimate should list the door, springs, track, hardware, opener, remotes, disposal of the old door, and labor. What’s often not included: framing repair if rot is found after demo, and any electrical work to add an outlet for a new opener. We flag those before we proceed, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco homes specifically do to this job
San Francisco garages aren’t like garages most places. The city’s dense stock of 1880s-1920s Victorian and Edwardian wood-frame row houses means the door opening is often framed into a building that’s over a century old, sitting on a brick foundation, with a header that’s settled unevenly. Add the soft-story seismic retrofit work many of these buildings have already had, and you’re fitting a new door into a structure that’s been modified more than once. On the west side, ocean fog and salt air corrode standard fasteners and eat through paint on exposed metal, so we spec stainless hardware and galvanized components even on a small job. On hillside lots, the garage is sometimes tucked under the house at an angle, which changes how the track and opener can run. That’s the reality in neighborhoods from the Sunset to Noe Valley. It’s also why we measure in person before ordering. If the wider exterior is part of the plan, that work lives on our Windows & Doors in San Francisco page, and the driveway side of the project is covered under Concrete Driveways & Concrete Work in San Francisco. Homeowners often pair a new door with Paver Driveways in San Francisco when the approach is being redone at the same time.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Impact Garage Doors in San Francisco
Most jobs take one to two days on site, plus a lead time of roughly two to six weeks for the door to arrive. The site work is fast; the wait is the door. Once we measure, we’ll give you the actual delivery window before you commit.
Replacing a door in the existing opening usually doesn’t require a building permit, but changing the opening size, adding a new opening, or structural work to the header does. San Francisco’s planning process is slow and discretionary, so if your job touches the structure, expect a longer timeline. We’ll tell you up front which side of that line your job sits on, and pull permits where they’re required.
Yes, in most cases. A straight replacement reuses the existing opening and doesn’t touch plumbing or framing beyond localized repair. If we find rot or the opening is out of square after demo, that gets quoted separately before we rebuild anything.
Expect $4,200 to $9,800 installed for a single bay, depending on size, material, opener and opening condition. Call (866) 320-2646 for an exact quote; estimates are free and we put it in writing.
The door and opener carry their manufacturer’s warranty, and our labor is backed by the 730-Day Done Right Promise. If something we installed isn’t right, we come back and make it right. That’s in writing.
Get a written estimate for your door
We’ll come out, measure the opening, check the framing and the track clearance, and hand you a line-item estimate with the door model, hardware and labor broken out. No pressure and no vague ballpark. Call (866) 320-2646 to schedule your free estimate, and we’ll confirm the lead time for your door before you decide anything. We cover San Francisco and the surrounding area, and our Windows & Doors service covers the rest of the exterior if the project grows.
Written by the team at Groundwork Construction Co..