Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in San Francisco: What the Job Actually Involves
Custom and geometric window work in San Francisco means cutting, framing, and glazing shapes that don’t come off a shelf: arches, half-rounds, trapezoids, angled gable glass, and full custom units built to a specific opening. A typical job runs two to four weeks from template to install, and most homeowners here land between $5,310 and $17,700, with complex or oversized geometric units climbing toward the impact-window range. Call (866) 320-2646 to set up a free on-site estimate.
How the Work Moves From Template to Final Seal
Geometric windows don’t get ordered from a catalog. Every one of them is built around a physical measurement of your opening, so the sequence matters more than on a standard replacement.
Stage 1: Site visit and field measurement (day 1)
We measure the rough opening, check the wall assembly for rot or soft framing, and photograph the surroundings so the shop knows what the unit has to sit against. On a hillside Edwardian, this is also where we spot the out-of-level conditions that mean a “square” window won’t fit a non-square hole. You decide the shape and glass type by the end of this visit, or shortly after.
Stage 2: Template and shop drawing (days 2 to 5)
Custom shops build a physical or digital template for arch and radius units, then produce a shop drawing showing the exact dimensions and radii. You approve the drawing in writing before anything is cut. This is the step that catches a mismatched radius, and it’s the one people skip when they buy direct online.
Stage 3: Build and delivery (two to five weeks, depending on the unit)
Radiused and trapezoidal units take longer than rectangular custom sizes because the glass has to be cut and, for true curved glass, bent. Standard-shaped custom units move faster. For a San Francisco address with an alley-load or a narrow stair, we schedule delivery to the access reality of the building, not the other way around.
Stage 4: Demo, framing, and install (two to four days)
We remove the old unit, repair or replace sheathing and framing, set the new window, shim and flash it, and seal it. Framing changes get inspected before the window closes up. Parking and access can add half a day on a dense block where the only staging is a loading zone or a shared driveway.
Stage 5: Trim, finish, and final walkthrough (one to two days)
We install interior trim and exterior casing, apply finish, and walk the job with you. Your one open decision at this stage is trim style and paint or stain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost and durability differences on a San Francisco geometric window come down to these choices:
- Frame material – vinyl: lowest cost, good thermal performance, but it can’t hold complex geometric shapes as cleanly and it doesn’t love salt air on an exposed west-side wall. Suits inland blocks and budget-led jobs.
- Frame material – wood and aluminum-clad: the traditional match for Victorian and Edwardian facades and the better path for true arched and radiused units. Cladding protects the wood from fog and salt. Higher cost, longer life.
- Glass and glazing: single-pane for a period look you’re deliberately preserving, double-pane for comfort and condensation control, laminated for the street-facing units where impact resistance matters. Laminated adds cost but is the right call on a ground-floor geometric window facing a busy sidewalk.
- Hardware and finish: stainless and marine-grade hardware is not a luxury here. Standard fasteners pit and corrode fast in the coastal fog belt.
- Shapes and configuration: half-rounds, arches, quarter-rounds, trapezoids, and stacked transoms cost more than rectangles at the same square footage because of the cutting and glazing work.
- Brand path: Andersen and Marvin for traditional profiles and complex shapes; ECO Window Systems and ViewLux for energy-focused and fabricated custom units. We’ll walk you through which suits your shape.
What Custom & Geometric Windows Cost in San Francisco, CA
Standard window replacement here runs $5,310 to $17,700, and geometric and custom units sit at the upper half of that or above it depending on shape and glass. Here’s what moves the number:
| Cost driver | Effect on price |
|---|---|
| Rectangular custom size vs. arched or radiused unit | Rectangular at the low end; curved glass and true radii add meaningfully |
| Frame material (vinyl vs. clad wood) | Vinyl lowest; clad wood and aluminum higher |
| Glass spec (single, double, laminated) | Laminated and impact-rated add cost |
| Framing or rot repair discovered at demo | Adds labor and materials, quoted before the work proceeds |
| Access, parking, alley staging | Can nudge labor on dense blocks |
| Permit scope (visible-shape changes vs. same-size swap) | Changing the exterior profile adds permit and inspection time |
A written estimate covers measurement, template, the window unit, framing repair up to a stated limit, flashing and sealing, trim, and finish. It doesn’t cover hidden rot behind sheathing, structural reframing, or repainting an entire exterior wall; those get quoted separately once we open the wall and see what’s there. Our upfront pricing means the number you see is the number you pay, with no change-order surprises. Call (866) 320-2646 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco is one of the densest, most historic urban cores in the country, and nearly all of its hillside building stock went up either before the 1906 earthquake or in a rapid rebuild after it. That matters because a geometric window in a Hillside Edwardian in Noe Valley or a Twin Peaks row house has to fit a wall that has settled over a century on a slope, and “square” is a theoretical concept on those walls. Soft-story seismic retrofit work often means the framing around a new window opening gets reviewed alongside the retrofit, which adds coordination time. Neighborhood design review can push a visible exterior change through a longer approval path than an interior swap. On the west side, the fog belt and ocean salt make stainless hardware and galvanized flashing standard even on a small arched unit, because the damp corrodes ordinary fasteners and paint in a fraction of the normal lifespan. We cover the whole city, from the Avenues to the Mission to the Bayview. If you’re also reworking the approach, homeowners often pair this with a new Concrete Driveways & Concrete Work in San Francisco or Asphalt Driveways & Resurfacing in San Francisco while the crew is on site, and we handle the wider job through our Windows & Doors service. When the geometric windows are part of a full Windows & Doors in San Francisco scope, we coordinate the trades in one schedule. See how we cover San Francisco.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in San Francisco
Most jobs run two to four weeks from template to final seal, with the window build itself taking the longest, usually two to five weeks for radiused or oversized units. The install itself is typically two to four days. Call (866) 320-2646 for a timeline on your specific opening.
If the new window changes the exterior profile or size of the opening, yes, you’ll need a permit and an inspection. A same-size swap that matches the existing opening usually does not. We pull permits and pass inspections as part of the job. Call (866) 320-2646 to confirm what your project needs.
Often yes, since the window fits the existing wall opening. On older homes, framing repair or a header change may be needed to hold the shape, and we’ll flag that at the site visit before anything is ordered. Call (866) 320-2646 to schedule the free estimate.
Expect $5,310 to $17,700 for most jobs, with arched, radiused, and laminated-glass units at the top of that range. Access and framing repair add to it. Call (866) 320-2646 for an exact quote; estimates are free.
All of our work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person around the clock, and technicians arrive background-checked and in uniform. Call (866) 320-2646 to book your free on-site estimate for custom & geometric windows in San Francisco.
Get a Free Estimate on Custom & Geometric Windows in San Francisco
Every estimate starts with a free on-site visit where we measure the opening, talk through the shape and glass you want, and give you a written line-item quote on the spot. You’ll know the number before you commit, and our upfront pricing holds. Call (866) 320-2646 to schedule, or ask about the $1,000 off projects over $10,000 and 0% financing for 18 months. The work is backed in writing by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.