Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
This page is custom & geometric windows in Daly City, and it answers one thing: what it takes to put a shaped or oversized window into a Daly City home, what it costs, and why this job is harder here than three miles inland. Most custom & geometric window projects in Daly City run $6,500 – $22,000 depending on count, shape, and how much framing and flashing repair the wall behind the old unit needs. Call (866) 320-2646 for a free on-site estimate.
What Custom & Geometric Windows in Daly City Actually Involve
Custom & geometric windows are any unit that doesn’t come off a standard size chart: arches, half-rounds, trapezoids, angled corner glass, raked gables, and full-height picture windows sized to the opening. In Daly City they’re almost always going into a 1940s – 1960s stucco wall, which means the real work is the opening, the flashing, and the trim, not the glass itself. A typical single geometric window takes one to two days; a set of four or more across two elevations runs four to six days from demo to final sealant. Pricing sits in the $6,500 – $22,000 range for most homes here, and the estimate is free.
How We Build a Custom & Geometric Window Job, Stage by Stage
Every project starts with a measurement visit, not a catalog. Here’s the sequence we follow on a custom & geometric job in Daly City.
Stage 1: Template and opening survey (day 1, about 2 hours)
We template the existing opening, check it for square, and photograph the wall assembly from inside and out. On a fog-belt stucco house, this is where we find the soft sheathing, the rusted nail fins, or the original redwood header that’s been pulling moisture for thirty years. You get a written line-item quote from this visit, not a ballpark.
Stage 2: Order and fabrication (3 to 6 weeks)
Geometric units aren’t stocked anywhere. Arches and trapezoids are built to the template, and lead time depends on shape complexity and finish. You make two decisions in this window: glazing package and interior trim style. We don’t order until you’ve signed off on both, because a half-round cut to the wrong radius is a $1,400 mistake nobody wants to eat.
Stage 3: Protection and demo (day 1 of install)
Floors and furniture get covered before anything comes out. The old unit comes out, and the opening gets inspected for rot and water damage. On the steep streets off Mission and Westlake, we routinely find rot in the framing below the sill that wasn’t visible from inside. That repair gets priced and approved before we set the new window, never after.
Stage 4: Framing, flashing, and setting (day 1 to 3)
We sister in new framing, install a sill pan, and flash the opening in the correct sequence: sill first, then jambs, then head. Waterproofing detail is where cheap installs fail here. The new geometric unit gets set, shimmed, and checked for plumb in both directions. A raked or angled window takes longer to set than a rectangle because there’s no straight edge to trust.
Stage 5: Stucco, trim, and final inspection (day 3 to 6)
Exterior stucco gets patched and re-textured to match, the interior gets trimmed out, and the whole assembly gets a water test. You walk the job with us, check operation, and sign off. Any punch item gets logged and corrected under our 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on Custom & Geometric Windows
Custom & geometric windows have more decision points than a standard replacement. Here’s what actually matters and what each choice costs you in money and patience.
- Frame material: vinyl vs. aluminum-clad wood vs. fiberglass. Vinyl is the value pick and handles the damp well, but it’s limited in geometric shapes and can’t be built as large. Aluminum-clad wood gives you the widest range of shapes and the warmest interior, at roughly 30% to 50% more per unit. Fiberglass sits in the middle and holds its shape better in full sun on south-facing glass.
- Glazing package. Double-pane with a low-E coating and argon fill is the standard here. Fog-belt homes rarely need the hottest solar-control glass; they do need good edge sealing, because wind-driven rain finds every weak gasket.
- Shape and radius. A half-round is straightforward. A true elliptical arch or a trapezoid cut to a rake angle adds fabrication cost and lead time. Every added curve is a labor line.
- Interior finish. Drywall return, wood trim, or a flush jamb. Wood trim is the most common choice in Daly City’s older interiors and the easiest to match later.
- Exterior trim. PVC and composite trim last longer than wood in this climate and skip the repaint cycle.
We work with ECO Window Systems and Mr-Glass for custom fabrication, and we’ll put both quotes side by side in front of you rather than picking for you.
What Custom & Geometric Windows Cost in Daly City, CA
Most custom & geometric window jobs in Daly City land in the $6,500 – $22,000 range. Here’s how the number breaks down and what pushes a project to the low end versus the high end.
- Single geometric unit, standard shape, no framing repair: $2,200 – $4,500 installed.
- Arched or raked unit with new framing and stucco patch: $3,500 – $7,000 per opening.
- Set of three to five units across two elevations: $9,000 – $18,000.
- Rot repair and reframing below the sill: $600 – $3,500 depending on how far the moisture traveled.
- Stucco patching and re-texture to match: $500 – $1,800 per elevation.
Four variables move the price more than anything else: size and shape complexity (a full-height picture window far outruns a small half-round), existing wall condition (soft sheathing and rotted framing are common here and always add cost), whether the opening moves (relocating or enlarging means structural framing and possibly a permit), and finish grade on both trim packages. Every written estimate lists material, labor, permit, and disposal as separate lines. What’s included: template, fabrication, install, flashing, stucco patch, interior trim, and cleanup. What’s typically not: structural repair beyond the window opening, and interior painting.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to This Job
Daly City’s dense rows of post-war stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that changes the job in ways flat inland suburbs never see. The persistent fog and wind-driven rain mean exterior stucco and sealant fail faster here than they do ten miles south, so the flashing detail around a new geometric window matters more, not less. On the steep streets off Mission and Westlake, we regularly find original redwood framing and unpermitted additions that have quietly rotted from decades of moisture, and that rot has to be repaired and often legalized before the window can be signed off. Tight lots matter too: neighbors’ walls are often only feet away, which makes scaffolding, ladder placement, and material staging its own puzzle on a hillside build. Permitting runs through the city’s building department, and any change to the opening size or structure triggers a plan review. If the window work is part of a Windows & Doors in Daly City scope across the whole house, we sequence it so the stucco and framing repairs happen once, not twice. Our technicians have up to 12 years of experience reading exactly these failure patterns, and every job is background-checked and uniformed.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Daly City
Fabrication takes 3 to 6 weeks, and install runs one to six days depending on count and repair scope. Geometric units are built to your template, so the clock starts at measurement, not at order. Add a week if we find rot that needs reframing. Call (866) 320-2646 to schedule your free estimate and get a real timeline for your openings.
Yes, if the opening size or structure changes, and often yes even for a like-for-like swap in a stucco wall. Same-size replacement in the same opening is usually exempt, but enlarging or reshaping always requires plan review. We pull the permits and handle inspection scheduling. Call (866) 320-2646 and we’ll tell you which category your job falls into.
Usually yes, if the shape fits inside the existing opening framing. A half-round or trapezoid that sits within the rough opening needs no structural change. A full arch that requires a new curved header does, and that scopes the permit and timeline differently. We confirm this at the template visit.
Most projects run $6,500 – $22,000, with a single geometric unit starting around $2,200 installed and larger multi-elevation sets reaching the top of that range. Rot repair, stucco patching, and shape complexity are the three biggest levers. Call (866) 320-2646 for an exact quote – estimates are free and written line-item.
Every custom & geometric window install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, flashing, and sealant, and it runs alongside the manufacturer’s product warranty on the unit itself. We put it in writing before the job starts.
Get a Free Estimate on Custom & Geometric Windows in Daly City
We’ll come out, template your openings, inspect the framing and flashing, and hand you a written line-item estimate at no charge. Calls are answered by a live person 24/7 at (866) 320-2646, so you’re never leaving a voicemail. Most Daly City homeowners pair this work with Concrete Driveways & Concrete Work in Daly City or Asphalt Driveways & Resurfacing in Daly City while the scaffolding is up, and we’re glad to quote both together. If you’re still sorting the wider project, start with our Windows & Doors service, or see everything we cover across Daly City. We also serve San Bruno, Pacifica, San Francisco, and Tiburon.
Written by the team at Groundwork Construction Co.