Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Full Kitchen Remodeling in Mill Valley: What the Job Actually Involves
Full kitchen remodeling in Mill Valley, CA runs $14,000 – $45,000 and takes six to ten weeks of active construction, longer if the layout moves plumbing or walls. That number covers tear-out, new cabinets and counters, flooring, lighting, and finish work on a typical 94941 kitchen. The high end is almost always a hillside split-level where access, fire-rated detailing, and design review add real days to the schedule. Call (866) 320-2646 to put your address on the calendar for a free on-site estimate.
How We Run a Full Kitchen Remodeling Job, Stage by Stage
A full kitchen is not a series of small jobs bundled together. It’s one sequence, and the sequence is where projects go wrong. Here’s the order we work in, and what you decide at each point.
Stage 1: Walkthrough and written scope (week 1)
We measure the room, photograph the existing conditions, and check what’s behind the drywall: knob-and-tube or older wiring, galvanized supply lines, a previous homeowner’s unpermitted pass-through. You leave this visit with a line-item written estimate, not a lump number. This is when you decide how far the scope reaches: cosmetic refresh, or layout change.
Stage 2: Design and permit (weeks 2 – 4)
You pick cabinet door style and finish, countertop material, sink and faucet, and lighting plan. On many Mill Valley hillside lots the kitchen sits against an exterior wall that may need fire-rated assembly detailing, and that’s settled now, at the drawings, not in the field. Permits are pulled and inspection points built into the schedule. You decide finish grades; we handle the submittal.
Stage 3: Demo and rough-in (week 5, roughly 5 – 7 working days)
Old cabinets, counters, flooring, and appliances come out. We protect the rest of the house with floor covering and plastic dust walls, because a hillside split-level usually has the kitchen open to a living or dining room. Framing corrections, new electrical circuits, plumbing rough-in, and venting go in. Rough inspection happens here. You decide appliance models before this stage, because the electrical and gas rough-in depends on them.
Stage 4: Drywall, cabinets, and surfaces (weeks 6 – 8)
Insulation and drywall go up, then paint, then cabinets set level and shimmed against walls that are rarely square in older homes. Countertops are templated after cabinets are in and installed 7 – 10 days later. Flooring and lighting land in this stretch too. You decide hardware and fixtures early so they’re on site when the crew needs them.
Stage 5: Punch list and final inspection (week 9 into week 10)
Final electrical and plumbing inspections, appliance hookup, and a walkthrough with you. We don’t call it done until the punch list is empty. Everything here is backed by our 730-Day Done Right Promise: if it’s not right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Mill Valley Kitchen
- Cabinet construction. Plywood-box boxes with solid wood or MDF doors hold up far better in a wet-winter climate than particleboard. KraftMaid and Wellborn both offer semi-custom sizing, which matters in older homes where no two walls are parallel.
- Countertop material. Cambria quartz gives you a non-porous surface you can leave a lemon half on without staining. Natural stone costs more and needs sealing once a year. Laminate is the budget pick and shows wear within a decade.
- Flooring. Porcelain tile is nearly indestructible and handles a wet entry path. Engineered hardwood looks warmer underfoot. Luxury vinyl plank is the value choice, and it does fine in a house where the kitchen sits near a hillside door.
- Sink and layout. A single-bowl undermount is what most buyers pick now. A workstation sink with cutting-board inserts suits cooks; a double bowl suits dish handlers. Moving the sink means moving the drain, which is a real line item.
- Ventilation. A ducted hood to the exterior does more than a recirculating microwave. In a fire-risk zone, exterior venting also keeps grease and heat out of the wall assembly.
What Full Kitchen Remodeling Costs in Mill Valley, CA
The live range for a full kitchen here is $14,000 – $45,000. A compact kitchen with stock cabinets and laminate counters sits near the low end; a hillside home with custom cabinetry, quartz, and a moved layout lands near the top.
Five variables push the number:
- Square footage and layout. A galley under 100 square feet costs less to demo and less to finish. Opening a wall to a dining room adds framing, drywall, and a beam.
- Existing condition. Older foundations, unpermitted past additions, and 1950s wiring add discovery work. In Mill Valley homes of that era we budget for electrical upgrade as a likely item, not a maybe.
- Moving plumbing or structure. Relocating a sink, range, or wall can add several thousand dollars once you count permits and finish repair.
- Material grade. Stock cabinets versus KraftMaid semi-custom, laminate versus Cambria quartz, vinyl plank versus tile. Each choice moves the total by hundreds to thousands.
- Permit scope and inspections. Structural, electrical, and plumbing changes each add review and inspection time.
Your written estimate lists what’s included: demo and haul-away, cabinets, counters, flooring, paint, electrical, plumbing, permits, and final inspection. It also lists what isn’t: appliance packages, structural repair discovered behind drywall, and any design-review submittals if the project triggers them. That separation is deliberate. Upfront pricing means the number you see is the number you pay, unless you approve a change in writing first.
See the difference
Before
After
Before
After
Before
AfterWhat Mill Valley Homes Specifically Do to a Full Kitchen Remodeling Job
Mill Valley isn’t a flat-lot town. Much of the housing sits on steep hillside grades, and streets like the lanes off Miller Avenue or the switchbacks above downtown are single-lane with no turnaround. That changes the job before demo even starts: material delivery has to be scheduled early, a spotter guides the truck, and cabinet stacks get staged on the driveway rather than dropped at the curb. On a kitchen remodel, that means cabinets and countertops arrive on a pre-dawn window or the delivery gets rescheduled.
The housing stock compounds it. Redwood cottages near downtown were built in the early 1900s, split-levels on the hillsides in the 1950s through ’70s, and modern architect-designed rebuilds scattered between. Older foundations, cantilevered redwood decks, and unpermitted past additions are common, and we plan the kitchen scope around what the structure can actually support. Marin’s wet winters and dry summers mean the kitchen’s exterior wall has to handle seasonal rain and hillside runoff correctly. Fire-resistant detailing at exterior penetrations, including ember-resistant vents and non-combustible deck surfaces, can touch even a modest remodel under the city’s wildfire prevention rules. And every project on a tree-lined lane is visible to neighbors, so the work has to look right from the street, not just from the inside.
Serving Mill Valley, CA – Our Local Coverage Area
We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Full Kitchen Remodeling in Mill Valley
Plan on six to ten weeks of construction. Design and permit review typically add three to four weeks before that. Hillside access and design-review submittals can stretch the front end on some lots. Call (866) 320-2646 for a schedule based on your address.
Yes, for anything beyond a cosmetic refresh. Cabinet replacement, counter and flooring work, electrical, plumbing, and structural changes each require permits and inspection in this city. We pull them and schedule the inspections. You don’t have to chase the building department.
Yes, and plenty of homeowners choose that path. Keeping the sink, range, and walls where they are drops the cost toward the $14,000 – $20,000 end and shortens the schedule. Moving plumbing or a wall is a choice, not a requirement. We price both so you can compare.
Between $14,000 and $45,000 for the work we normally do here. Custom cabinetry, quartz counters, and layout changes push toward the top. Stock cabinets and laminate sit near the low end. Call (866) 320-2646 for an itemized quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise. If something we installed fails or isn’t right, we come back and fix it, for two years. That’s one of the longest workmanship guarantees in residential construction.
Schedule Your Free Full Kitchen Remodeling Estimate in Mill Valley
Call (866) 320-2646 and a live person answers, day or night. We’ll set a time to walk your kitchen, check what’s behind the walls, and hand you a written line-item estimate for full kitchen remodeling in Mill Valley, CA. No pressure to sign that day. Estimates are free, and 0% financing for 18 months plus $1,000 off projects over $10,000 are available when you’re ready.
Written by the team at Groundwork Construction Co.