A Groundwork company - serving San Francisco, CA
Paver Driveways in Mill Valley, CA | Groundwork Construction Co. of San Francisco

Paver Driveways in Mill Valley - Free On-Site Measure, Price Per Square Foot

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Paver Driveways in Mill Valley, CA: What to Expect and What They Cost

A paver driveway in Mill Valley typically runs $7,000 to $18,000 and takes three to six working days from demo to final compaction, depending on square footage, base depth, and how steep your lot is. The work is a layered build, not a pour: excavation, a compacted aggregate base, edge restraint, then pavers set, cut, and locked with joint sand. Call (866) 320-2646 and we’ll price your specific driveway.

Call (866) 320-2646

How we build a paver driveway, stage by stage

The order of operations is what separates a driveway that holds for decades from one that settles and shifts within two winters. Here’s the real sequence, with honest durations.

  • Stage 1 – Site walk and layout (half a day). We measure the drive, check slope and drainage, and mark the finished grade. On hillside properties off Summit or Cascade, this is where we work out how runoff leaves the site. You decide the paver pattern and border at this point, because it drives the order.
  • Stage 2 – Excavation and haul-off (one to two days). We remove the old surface and dig down to the subgrade. Mill Valley lots are often heavy clay over rock, so this stage can stretch if we hit the hardpan the hillsides are known for. Trucks may need a spotter and a pre-dawn window on single-lane streets with no turnaround.
  • Stage 3 – Base and edge restraint (one to two days). A compacted aggregate base, built to depth for the traffic, goes in lifts. On a standard residential drive that’s typically four to six inches of crushed base; on the longer service drives some Mill Valley acreage properties have, we build deeper. The edge restraint gets set in concrete so the field can’t creep.
  • Stage 4 – Setting pavers and cuts (one to two days). We lay the field in the chosen pattern, then cut perimeter pieces against the restraint. Any utilities, drains, or a transition to a garage apron get detailed here. This is the visually loud stage and the one homeowners watch.
  • Stage 5 – Joint sand and final compaction (half a day). Polymeric sand goes into the joints, the whole field gets a plate compactor pass, and we sweep and clean. We walk the finished drive with you and note anything that needs attention.

You’ll make decisions in a predictable order: pattern and color first, then drainage approach, then detailing. If your drive is part of a full Driveway & Pavers in Mill Valley project that includes walkways or a patio, we sequence those so the crews don’t tear each other’s work up.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll actually choose between

Most homeowners spend their time on three decisions: material, thickness, and pattern. Here’s what each choice means in practice.

  • Concrete vs. clay pavers. Concrete pavers cost less up front and come in the widest color range. Clay pavers hold color longer and shrug off freeze-thaw better, but cost more. For a Mill Valley drive that sees wet winters, both work; it comes down to budget and look.
  • Paver thickness. Two-and-three-eighths inch pavers are for foot traffic only. You want a full two-and-three-quarters inch paver for a vehicle drive. A heavier service drive or one that takes a truck or trailer should go thicker or get a reinforced base beneath it.
  • Permeable vs. standard joints. Permeable pavers with open joints and a storage base let rainfall soak in, which matters on hillside lots with runoff. They cost roughly 10 to 20 percent more and need periodic vacuuming to stay open.
  • Pattern. Running bond and herringbone are the workhorses. Herringbone locks tighter under turning wheels; running bond is faster to lay and less expensive.
  • Color and border. A contrasting border adds a finished edge and roughly $500 to $1,500 to the job.

We keep a curated set of material partners across every trade, and that extends to the hardscape lines we specify. You’ll see the actual product samples before we order, so the driveway matches the house and the neighborhood, not a catalog photo.

What paver driveways cost in Mill Valley, CA

Paver driveway installation in Mill Valley runs $7,000 to $18,000 for a typical residential drive. That range holds because four things move the number more than anything else.

  • Square footage. A short, straight drive lands near the low end. Longer service drives and wide turnarounds push toward the top.
  • Existing surface and access. Removing an old asphalt or concrete drive, plus hauling it out on a narrow lane, adds cost for labor and truck time.
  • Base depth and subgrade. Clay or rocky subgrade means more excavation, more base material, and possibly a drainage fix. This is the single most common swing factor on hillside properties.
  • Material grade. Premium clay or textured concrete pavers cost more than standard concrete. Permeable systems add a storage base and special detailing.

Your written estimate should spell out demolition, haul-off, base depth, edge restraint, paver selection, joint sand, and cleanup. It should not include surprises. Upfront pricing means the number we quote is the number you pay, and the work is backed by our 730-Day Done Right Promise. If your project is over $10,000, $1,000 off applies, and 0% financing for 18 months is available.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Mill Valley homes specifically do to this job

Mill Valley is a hillside-and-lane town, and that reality shapes paver driveways here more than in flatter Marin towns. Building on steep lots off streets like Summit Avenue or Cascade Drive means narrow access and single-lane approaches, so we plan truck routes, delivery windows, and staging before we break ground. The housing stock pushes back too: early-1900s redwood cottages near downtown, 1950s to 1970s ranch and split-level homes on the slopes, and modern rebuilds on the same lots. On many of these we find older foundations and past unpermitted additions, so drainage has to be engineered around what’s actually there, not what the plans claim. The Mediterranean climate brings wet winters and long dry summers, and hillside runoff is the failure mode we see most: water undermining a base that wasn’t built deep enough. Add the city’s wildfire-prevention expectations and on some properties non-combustible detailing, and it’s clear why nothing here is off-the-shelf. We cover Mill Valley and the surrounding towns and plan each drive as a site-specific puzzle rather than a copy of the last one.

Serving Mill Valley, CA – Our Local Coverage Area

We serve Mill Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked – paver driveways in Mill Valley

Get a free estimate on paver driveways in Mill Valley

Call (866) 320-2646 to schedule a free on-site estimate for paver driveways in Mill Valley. A live person answers around the clock, and we’ll walk your driveway, check drainage and access, and hand you a written line-item quote with the numbers spelled out. If you’re weighing a broader project, homeowners often pair this with Garage Conversion ADU in Mill Valley or ADU Design & Permitting in Mill Valley while the crews are already on site. Start with a call and our Driveway & Pavers team will take it from there.

Written by the team at Groundwork Construction Co.

Why Mill Valley Chooses Groundwork Construction Co. of San Francisco

We set the standard for paver driveways in Mill Valley.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Mill Valley

Getting your paver driveways project started is simple.

1

Call or Request a Free Estimate

Tell us about your paver driveways project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local paver driveways pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Mill Valley Customers Say

Trusted by homeowners across Mill Valley and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Paver Driveways in Mill Valley?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Mill Valley.

(866) 320-2646

Request a Free Estimate in Mill Valley

Tell us about your paver driveways needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch