Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Corte Madera: What It Involves and What It Costs
Metal roofing in Corte Madera usually runs $15,000 – $40,000 for a full residential install, with most homes landing in the $22,000 – $30,000 range depending on roof size, pitch, and panel type. A typical job takes 5 – 10 working days from tear-off to final inspection, longer if the roof needs redecking or the low-lying lots near the creek require elevation-related detailing. Call (866) 320-2646 to schedule a free on-site estimate; we’ll walk the roof, measure it, and put the whole number in writing before anyone touches a panel.
How We Run a Metal Roofing Job, Stage by Stage
Metal roof work on this town’s housing stock is not a two-afternoon job, and we don’t treat it like one. Here’s what actually happens, so you know what to expect on day one and what’s still ahead on day five.
Stage 1: Assessment and deck inspection (days 1 – 2)
We start on the roof and in the attic, checking rafter spacing, sheathing condition, and whether the existing underlayment has failed. On the mid-century ranchers and split-levels built here between the 1950s and 1970s, we often find original skip sheathing that needs to be upgraded to solid decking before a standing-seam panel can go down. You’ll get a written finding before we move forward, not a surprise line item later.
Stage 2: Tear-off and deck prep (days 2 – 4)
Old roofing comes off, and we inspect every inch of the deck. Rotted or soft sheathing gets replaced, and we lay down a high-temp peel-and-stick underlayment rated for metal. If your chimney, skylights, or vent stacks need flashing reworked, this is when it happens. You’ll be deciding on finish color and trim details during this window.
Stage 3: Panel layout and cutting (days 3 – 5)
Panels get measured, cut, and staged. On a complex roofline with valleys, dormers, or a carriage-style gable, this takes the most time and the most skill. Precision here is what separates a clean install from a roof that leaks at every valley in ten years. We let you confirm the panel layout and trim profile before anything is fastened.
Stage 4: Installation and fastening (days 4 – 7)
Panels are fastened with concealed clips on standing seam, or exposed fasteners on corrugated and ribbed systems, with gasketed screws matched to the material to prevent galvanic corrosion. Ridge caps, valleys, and sidewall flashing go on with each section. If your home has solar or a rooftop HVAC unit, we plan the penetrations before install, not after.
Stage 5: Final inspection and your sign-off (days 7 – 10)
We do a magnetic sweep for fasteners, check every flashing point, and walk the roof with your local inspector for final sign-off. You receive a written completion report and the 730-Day Done Right Promise covering our workmanship. If something’s off, we come back and make it right. That’s the whole point of the guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Options You’ll Weigh Before Installation Starts
Metal roofing isn’t one product. The biggest decisions you’ll make are panel style, gauge, and finish, and each trade-off is real.
- Standing seam (best for most homes here): Concealed fasteners, clean vertical lines, and no exposed screws to fail. Costs more than exposed-fastener systems but holds up better to Marin’s wet winters. The right choice for a two-story custom home where curb appeal matters.
- Corrugated and ribbed panels: The lower-cost end of the metal market. Exposed fasteners simplify install and keep the number down, but washers can age out in a decade or two. Fine for a shed, a garage, or a budget-conscious re-roof where the roof isn’t visible from the street.
- Panel gauge: 26-gauge is standard for residential; 24-gauge is heavier, dents less, and lasts longer under tree limbs and debris in the hillside lots. Higher gauge means a higher number. That extra cost usually pays off on homes near the ridge.
- Finish and color: Kynar 500 (PVDF) coatings hold color for decades; standard polyester finishes fade faster. A darker matte finish suits the carriage-house and custom-home look that dominates the hillside rebuilds, but it does absorb more heat. Lighter tones reflect sun and keep attic temps lower.
- Solar-ready vs. standard: If you’re planning panels within a few years, we can install solar-ready mounts during the initial install so you’re not paying to lift panels later. Worth deciding now, not later.
What Metal Roofing Costs in Corte Madera, CA
Most Corte Madera metal roofing jobs land between $15,000 and $40,000 for a full install, with the median around $25,000. Here’s what moves a specific job up or down that range:
- Roof size and complexity: A simple gable on a 1,500 sq ft rancher sits at the low end. A 2,800 sq ft two-story with dormers, multiple valleys, and a garage tie-in pushes toward the top.
- Decking condition: Original sheathing on a 1960s home often needs replacement, adding thousands.
- Panel type and gauge: Standing seam at 24-gauge costs meaningfully more than corrugated 26-gauge.
- Structural reinforcement: Metal is lighter than tile, but some older roofs still need strapping or rafter upgrades.
- Permitting scope: A full tear-off with deck replacement triggers a longer inspection sequence than a recoat or overlay.
Your written estimate will itemize tear-off, decking, underlayment, panels, flashing, and inspection. What it won’t include unless you ask: solar panel removal and reinstall, skylight replacement, and gutter replacement. Those get their own line items so you can see exactly what you’re paying for. No-hassle upfront pricing. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Do to This Job
The town’s geography splits neatly, and both sides show up in how we approach a metal roof. The flats near Corte Madera Creek and the Town Center sit in designated flood zones, so contractors routinely deal with flood-elevation permits, raised foundations, and drainage plans. That affects a metal roof install more than you’d expect: shorter eaves, tighter flashing, and wind uplift detailing that meets the flood-zone inspection overlay. The hillside lots above town are a different job, with steeper pitches, tighter access, and slope-stability requirements that change how materials get staged and how fall protection gets rigged. On the mix of mid-century ranchers and the newer two-story custom homes being built on teardown lots, we see the same failure modes on the old roofs: rust-through at the valleys after decades of wet winters, corroded fasteners on earlier metal installs, and wind-lifted panels near the ridge where the older flashing was underbuilt. That’s why the deck inspection in stage one matters as much as the panels themselves.
If the metal roof is part of a bigger rebuild, our Roofing in Corte Madera page covers how the roof ties into the rest of the scope, and our general Roofing service page is where the wider material lineup lives. Homeowners often pair a metal roof with upgraded glazing as part of a full envelope upgrade: Window Replacement in Corte Madera and Impact Windows & Doors in Corte Madera both get priced in the same estimate when it makes sense.
Permitting runs through the local building department, and any roof re-cover or replacement on a flood-zone lot may need elevation documentation as part of the submittal. We pull the permits and pass the inspections. That’s part of the service, not an add-on.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Corte Madera
Most residential installs take 5 – 10 working days from tear-off to final inspection. A simple ranch home can wrap in under a week; a complex two-story or a rebuild on a flood-zone lot can stretch to two weeks. Call (866) 320-2646 for a schedule specific to your address.
Yes, a roof replacement requires a permit, and any work in the flood-zone areas near the creek may trigger additional elevation or drainage review. We handle the submittal and the inspections. You don’t have to navigate the building department yourself.
Usually not. Metal is lighter than tile, so most homes don’t need reinforcement. On older original framing from the 1950s – 1970s we sometimes find rafters that need strapping to meet current fastening requirements, which we identify during the deck inspection. You’ll know before the panels arrive, never after.
Expect $15,000 – $40,000 for a full residential install, with most jobs in the $22,000 – $30,000 range. Complexity, decking condition, panel type, and permit scope are the main variables. Call (866) 320-2646 for an exact quote. Estimates are free and the price is locked in writing.
Every job is backed by our 730-Day Done Right Promise. If anything about the workmanship isn’t right, we come back and fix it. Panel manufacturer warranties run longer and depend on the product you choose; we’ll walk you through the specific warranty terms for your panel style before install.
Get a Free Metal Roofing Estimate in Corte Madera
Call (866) 320-2646 to schedule a free on-site estimate. We’ll measure the roof, check the decking, and go over panel options, timing, and the full written price with you. A live person answers the phone, day or night. Estimates are free, financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Every job comes with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.