Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Corte Madera, CA: What They Cost and How Long They Take
A paver driveway in Corte Madera typically runs $7,000 to $18,000 and takes three to six working days from demo to the final sweep of polymeric sand. That range covers excavation, a compacted aggregate base, edging, the pavers themselves, and cleanup. The number moves most on square footage and how bad the old surface is underneath. Call (866) 320-2646 to set up a free on-site estimate and we’ll measure your actual slope and drainage before quoting a figure.
How We Build a Paver Driveway, Stage by Stage
Paver work is mostly what happens under the pavers. The visible part is a day and a half; the base is where a driveway either lasts fifteen years or starts heaving after two wet winters. Here’s the real sequence.
Day 1: Demo and haul-off
We break out the existing asphalt, concrete, or old pavers and haul it away. If there’s lawn or gravel, that comes up too. On a typical Corte Madera two-car driveway this is a full day with a mini-excavator and a dumpster. You’ll want to move cars off the street before we start; we’ll tell you where the dumpster sits and how long it stays.
Day 2: Excavation and base prep
We dig down 8 to 12 inches depending on your soil and how much traffic the driveway takes. Then come two or three lifts of compacted aggregate base, each watered and plate-compacted separately. This is the part that decides whether the driveway holds through a wet Marin winter. You don’t need to be home for it.
Day 3: Grading, drainage, and edging
We cut the final slope so water runs to the street or a drainage point rather than toward your garage. On flatter lots we may set a channel drain or an open-grade base. Then we install edge restraint and, where called for, geotextile fabric to keep the base from pumping into the soil. This is the stage where you might weigh in on drain placement and where the driveway apron meets the sidewalk.
Days 4 – 5: Setting the pavers
We lay the pavers in the pattern you chose, cut the edges with a wet saw, and keep checking that courses line up. A 400-square-foot driveway is roughly a day and a half; larger layouts with curves or mixed patterns take longer. You’ll confirm the pattern and the border on the morning we start laying, because that’s the last easy moment to change it.
Day 6: Joint sand, compaction, and cleanup
We sweep polymeric sand into the joints, mist it, run the plate compactor over the surface, and sweep again. We wash down the street and haul off the last of the debris. You can drive on it after the sand sets, typically the following day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Paver Driveway
Most of the decisions happen before we break ground, and a handful of them change the price meaningfully.
- Concrete pavers vs. clay brick pavers: Concrete pavers are the working standard and cost less. Clay brick costs more per square foot but holds color better and suits the older Corte Madera flats near the creek. Concrete is the better value on a large driveway; brick is the better match on a smaller one with a period house.
- Paver thickness: 60mm pavers handle foot traffic and light cars; 80mm is the right call for a driveway that sees an SUV or a delivery truck. Going thinner to save money is a false economy on a driveway.
- Base depth: 4 inches of base is fine on solid ground; 8 to 12 inches is right where soil is soft or the lot is low and wet. This is the single biggest driver of durability.
- Pattern: Running bond and herringbone are the standard choices. Herringbone interlocks better under turning tires; running bond is faster and slightly cheaper to lay.
- Border and color: A contrasting border in a Belgard or Sterling paver gives the driveway a finished edge and hides the cut line. Color families and finishes (tumbled, smooth, textured) are worth seeing in person rather than on a screen.
- Permeable vs. solid surface: Permeable pavers with open joints cost more and need more base, but they help where runoff is a concern. On a lot that already drains to the street, a solid surface is usually the simpler answer.
What Paver Driveways Cost in Corte Madera, CA
Plan on $7,000 to $18,000 for a full paver driveway here. That’s the range we quote against, and it holds as long as the scope is a straightforward remove-and-replace.
| Line item | Typical range |
|---|---|
| Full paver driveway install | $7,000 – $18,000 |
| Driveway replacement (demo + new surface) | $5,000 – $14,000 |
| Sealing after install (optional) | $250 – $700 |
Four things push a job toward the low or high end:
- Square footage. A single-car apron and a 500-square-foot driveway are different jobs. The base is priced per square foot too, so size compounds.
- Condition underneath. Old concrete that’s cracked into slabs takes longer to break and haul than a clean asphalt surface. Soft or wet subgrade adds base depth.
- Slope and drainage. A lot graded toward the garage needs a channel drain or regrading. That’s a real line item.
- Paver grade and pattern. Premium pavers, a cut border, and a herringbone layout cost more than a basic running bond.
Every written estimate breaks out demo, base, pavers, edging, drainage, and cleanup as separate lines so you can see exactly what you’re paying for and what we’d cut if the budget came in tighter. No-hassle upfront pricing means the number you see is the number you pay. If we open the ground and find something unexpected, we stop and talk to you before doing anything that changes the price.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Do to a Paver Driveway Job
Corte Madera sits where the low flats meet the hills, and that split shapes driveway work here. On the flats near Corte Madera Creek and the Town Center, the ground is often wet through the winter and the lots sit inside mapped flood zones. That means the base has to be built higher and drier, drainage has to be planned before the first paver goes down, and on some properties the work touches grading and elevation requirements. We see pavers settle and rut where a driveway was laid on too shallow a base over wet creekside soil. A few blocks up into the hillside lots, the problem flips: water sheets down the slope and the driveway needs to shed it fast and hold its edge against a grade. We’ve relaid driveways off the hillside streets where the pavers crept downhill because the edge restraint was too light. The older mid-century ranchers and split-levels carry their own quirks; a lot of original concrete is underbuilt by current standards, and we’re often removing a slab that’s already cracked from decades of winter runoff. Around the older flats and near the marsh, the mix of remodels and rebuilds means we’re regularly tying a new driveway into a freshly regraded lot. If your project runs wider than the driveway, it’s part of a full Driveway & Pavers in Corte Madera scope, and where a property is being reworked behind the house, homeowners often pair this with Garage Conversion ADU in Corte Madera or with ADU Design & Permitting in Corte Madera work that changes the access and parking layout.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Corte Madera
Most paver driveways in Corte Madera take three to six working days, with stay-off time of about a day after the joint sand goes in. Larger layouts with curves or a cut border run longer. Call (866) 320-2646 for a schedule built around your lot.
Many driveway replacements here need a permit, and if you’re in a flood-zone lot, regrading and elevation can trigger additional review. We walk through what your specific property needs before work starts and pull the permit where required. Call (866) 320-2646 and we’ll tell you what applies to your address.
Often no. Pavers need a compacted base to sit on, and laying them over old cracked concrete usually shortens their life. On some sound, well-drained surfaces a thin overlay works, but we test the condition first and tell you honestly which way is right. Call (866) 320-2646.
Expect $7,000 to $18,000 depending on size, base depth, drainage, and paver grade. The range is a real one, not a teaser, and every estimate comes with itemized lines. Call (866) 320-2646 for an exact quote; estimates are free.
Every paver driveway we install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for two full years. Call (866) 320-2646 with any question about the finish.
Get a Free Estimate for Your Corte Madera Paver Driveway
We come out, measure your driveway, look at the base and the drainage, and hand you an itemized written quote for Driveway & Pavers work in Corte Madera. You’ll also hear about $1,000 off projects over $10,000 and 0% financing for 18 months. Call (866) 320-2646; a live person answers, 24/7.
Written by the team at Groundwork Construction Co.