Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Larkspur, CA: What It Costs and How Long It Takes
Door installation in Larkspur, CA typically runs $450 to $1,400 per door for an interior swap, and $1,800 to $6,500 for an exterior entry or patio door replacement, with most single doors finished in one to two days. That range covers removal of the old unit, framing and shim corrections, insulation, hardware, and finish trim. Call (866) 320-2646 for a free on-site estimate before you commit to anything. We’ll walk the opening with you, flag what the existing framing looks like, and put the number in writing.
How a Real Door Installation Goes, Day by Day
Most contractors hand you a one-line bid and a vague start date. Here’s the actual sequence, so you know what to expect when our crew shows up.
Day 1, morning: tear-out and framing inspection
We pull the old door, casing, and threshold, then spend 30 to 60 minutes assessing the rough opening. On Larkspur’s older downtown Victorians and bungalows, this is where surprises live. Rotted sill plates, out-of-square framing from a century of settling, or a header that was never properly sized. If we find rot that needs sistering or a new sill, we flag it before going further, not after the drywall is open.
Day 1, midday: opening prep and flashing
We level and square the opening, install new sill pan flashing, and set the weather barrier. This step is invisible when the job’s done and it’s the whole ballgame on an exterior door in Marin’s wet winters. Skipping or shortcutting flashing is the single most common reason doors leak within three years.
Day 1, afternoon: setting the door
The new unit goes in, gets shimmed and plumbed, and screws are driven through the frame into the studs. We check operation, reveal, and margins before doing anything else. On a patio or French door, this is where we set the astragal and confirm both leaves close flush.
Day 2: insulation, hardware, and trim
Low-expansion foam around the perimeter, finish hardware, lockset, and casing. On an Andersen or Marvin exterior door, we torque the multipoint hardware to spec. This is also where you decide on finish choices if you haven’t already: paint or stain grade, casing profile, and whether you want a threshold extension for a flush transition.
Day 2 to 3: final walkthrough and punch list
We test the swing, check the seal, and clean up. If any touch-up or adjustment is needed, it’s handled before we leave. Most jobs close out in a single visit; exterior replacements on a tricky opening occasionally stretch to a second day. Either way, you get a written completion checklist.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
- Steel entry doors. $1,200 – $3,500 installed. Good security, low maintenance, dent-able on impact. Suits homeowners who want durability without the upkeep of wood.
- Fiberglass entry doors. $1,400 – $4,000 installed. The best all-around pick for Larkspur’s wildfire-exposed hillside homes; won’t warp in Marin’s wet winters. Slightly heavier feel at the hinge.
- Solid wood doors. $2,000 – $6,500 installed. Beautiful, matches the period character of Magnolia Avenue Victorians, but needs refinishing every few years.
- Interior hollow-core. $450 – $900 installed per door. Cheap and light. Fine for closets and bedrooms.
- Interior solid-core. $800 – $1,800 installed per door. Noticeably quieter, holds up to kids and pets. Worth the upgrade on bedrooms and bathrooms.
- Sliding patio and French doors. $2,500 – $6,500 installed. We carry Andersen and Marvin for exterior units. Big decision here: fixed versus operable, and single versus multi-point locking.
Where brand matters most on this job: Andersen and Marvin on exterior units for the hardware and weatherstripping quality. Sterling on shower and bath doors if you’re doing a bathroom door swap as part of a larger remodel. Grohe for hardware packages if you want matching trim between rooms.
What Door Installation Costs in Larkspur, CA
Door installation in Larkspur runs $450 to $6,500 per door depending on the type, material grade, and whether the framing needs repair. A standard interior swap lands around $450 – $900. A high-quality fiberglass or steel entry door sits at $1,400 – $4,000. A custom exterior unit with framing work can hit $6,500. Here are the variables that move the number:
- Door type and grade. Hollow-core to solid-core alone is a $400 jump; standard exterior to custom is another $1,500 – $2,500.
- Existing condition of the opening. Out-of-square framing, rot, or a warped header on an older Larkspur home can add $300 – $1,200 in carpentry.
- Relocating the opening or changing size. Moving a door six inches means header work, drywall, and possibly electrical relocation. Add $800 – $2,000.
- Hardware and finish. Standard builder hardware is included; premium multipoint locks, smart-lock integration, or custom trim can add $200 – $600.
- Permit scope. A straight same-size replacement in Larkspur usually doesn’t require a permit. If you’re altering the opening or changing an egress door, expect $150 – $400 in permit fees and a longer schedule.
Our written estimates are line-item: door unit, labor, framing carpentry if needed, hardware, trim, and permit fees itemized separately. What’s not in the base number: exterior painting, drywall repair beyond the immediate opening if the wall isn’t already open, and any structural work uncovered once we demo. Those get quoted separately before we proceed. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Larkspur Homes Specifically Do to This Job
Larkspur’s housing stock runs from early-1900s Victorians and bungalows along Magnolia Avenue to mid-century hillside homes up in the canyon neighborhoods. That spread matters because the door installation realities are different in each. A downtown bungalow has an out-of-square opening and plaster-and-lath walls that require care during trim. A hillside home may need a new threshold system to shed water away from the slope. The town’s Design Review process scrutinizes any exterior change visible from the street, so a front-entry door replacement in Larkspur has to clear a review the same back-door swap on a Corte Madera house never triggers. Add in the wet-winter squeeze on scheduling and the WUI fire-hardening requirements that come into play on hillside properties, and this is a job where local familiarity with the permit desk saves real time. We handle that; you don’t need to figure out the Larkspur planning counter yourself.
Serving Larkspur, CA – Our Local Coverage Area
We serve Larkspur and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Larkspur
Most single-door installs finish in one to two days. An interior swap is often a single-day job; an exterior entry with framing repair or a patio door replacement can stretch to two or three. Call (866) 320-2646 for a firmer timeline once we’ve seen the opening.
A same-size door replacement usually doesn’t require a permit; changing the size, moving the opening, or swapping an egress door does. Larkspur’s review process also scrutinizes exterior changes visible from the street, so we confirm what’s needed before scheduling. Call (866) 320-2646 and we’ll tell you exactly what applies to your address.
Yes, usually. A same-size replacement in the existing opening avoids both. Moving or widening an opening is where structural work and, on adjacent walls, plumbing relocations come in. Call us and we’ll scope it honestly before you commit.
$450 to $6,500 per door, depending on type and condition. Standard interior runs $450 – $900; fiberglass or steel entry sits at $1,400 – $4,000; custom exterior with framing repair can hit $6,500. Call (866) 320-2646 for an exact quote; estimates are free.
Every door we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, not the door unit itself, which carries its own manufacturer warranty through the brand.
Get a Free Door Installation Estimate in Larkspur
If you’re planning Door Installation in Larkspur, the first step is a free on-site estimate. Call (866) 320-2646 and a live person answers any hour. We’ll come out to 94939 or 94977, walk the opening with you, talk through door options, and put the number in writing. No pressure, no sales script. Just a firm price, a clear timeline, and a crew that shows up when we say we will. Our windows & doors service, along with Chain Link Fence in Larkspur, Vinyl Fence in Larkspur, and our broader Windows & Doors in Larkspur work, are all part of the same Windows & Doors team serving Larkspur.
Written by the team at Groundwork Construction Co.