Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in San Rafael, CA: What the Job Actually Involves
Swapping a dated vanity, retiling a floor or tub surround, and replacing faucets, shower trim, and lighting in a San Rafael bathroom typically runs $9,000 – $28,000 when it’s part of a coordinated refresh, and a single vanity-plus-tile scope often lands at the lower end of that. Most of these jobs take one to two weeks of working days once materials are on site. Call (866) 320-2646 and we’ll price your exact scope on a free on-site estimate.
How We Run a Vanity, Tile & Fixture Refresh, Stage by Stage
This isn’t a demolition-first job. The order matters because tile, plumbing trim, and cabinetry all have to agree on the same finished plane. Here’s the sequence we follow on San Rafael jobs.
- Stage 1 – Measure and lock the template (day 1, about 2 hours). We measure the vanity opening, check wall plumb and floor level, and confirm the tile layout so cuts land where you won’t stare at them. You decide vanity size and door style, tile size and pattern, and fixture finish. Nothing gets ordered until these are signed off, because a late change on a 12-inch tile set is a re-buy, not a tweak.
- Stage 2 – Demo and substrate prep (days 1 – 2). Old vanity, mirror, and tile come out. We open the wall behind the vanity to check for water damage and old galvanized supply lines, then install cement backer board or a waterproof membrane on wet walls. This is the stage where a “simple” refresh either stays simple or reveals a rotted subfloor. You approve any hidden-damage add before we proceed.
- Stage 3 – Rough-in moves (day 2, only if needed). If you’re relocating the sink drain, adding a second sink, or moving a sconce, the plumbing and electrical rough-in happens here and gets inspected where the scope requires it. If fixtures stay in the same locations, we skip this entirely and save you both time and money.
- Stage 4 – Tile and vanity set (days 3 – 7). Floor and wall tile go down first, then grout cures, then the vanity cabinet is set and shimmed level, the top is templated or installed, and the sinks are set. Tile work is the slow part; rushing grout cure is how you get hairline cracks in a year.
- Stage 5 – Fixtures, trim, and punch (days 8 – 10). Faucets, shower valve trim, toilet reset, mirror, lighting, and caulk. We walk the room with you, run every fixture, and note anything that needs a return trip. You get the punch list in writing.
The two decisions that most often delay a job are tile lead time and vanity cabinet delivery. Pick your tile early and we can sequence everything else around it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the value in this job is decided in a single design conversation. Here’s what the choice looks like in practice.
- Vanity cabinet: A stock or semi-custom cabinet in the $800 – $3,000 installed range gets you solid construction and a clean fit; a semi-custom line like KraftMaid opens up door styles, finishes, and drawer configurations that fit odd wall widths. Fully custom costs more and rarely pays back in a secondary bath.
- Vanity top: Cultured marble is the budget workhorse and holds up fine. Quartz, including Cambria, costs more but resists staining and etching better around sinks. Natural stone looks the best and needs sealing; it’s the pick for a primary bath, not a kids’ bath.
- Floor tile: Porcelain is the default for good reason – dense, water-resistant, and available in large formats that reduce grout lines. Natural stone (travertine, slate) reads warmer but wants more maintenance. Luxury vinyl plank is cheaper and warmer underfoot but doesn’t last like tile in a wet room.
- Wall and shower tile: Ceramic on the walls is economical; porcelain and glass mosaics cost more and hold up longer in a shower. Large-format tile means fewer grout joints but demands a flatter substrate, which can add prep cost.
- Fixtures and finish: Kohler and similar lines in brushed nickel or matte black versus chrome. Finish is a taste call; valve quality is not – a cheap valve behind a beautiful tile wall is the most expensive place to save money.
What Vanities, Tile & Fixtures Cost in San Rafael, CA
A coordinated vanity, tile, and fixture refresh in San Rafael runs $9,000 – $28,000, with the low end of that range covering a single-bath refresh where plumbing stays put and the high end covering a primary bath with a custom vanity, natural stone, and relocated fixtures. Here’s what pushes a job toward each end:
- Scope and room count: One bath versus two changes the number more than any material choice.
- Existing condition: Rotted subfloor, failed waterproofing, or old galvanized supply lines behind the vanity add real cost to open and correct.
- Relocating plumbing or electrical: Moving a drain or adding a circuit is the single biggest line-item jump in this scope.
- Material grade: Quartz and porcelain push the number up; cultured marble and ceramic pull it down.
- Permit scope: Fixture swaps and cosmetic tile usually don’t trigger a permit; moving plumbing or electrical does, and that adds inspection time.
A written estimate should list tile, setting materials, vanity, top, fixtures, labor, demo, and disposal line by line. What it usually doesn’t include: structural repair found behind the wall, and any change to the layout you decide on after demo. We quote those as they come up, in writing, before we proceed.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the seat of Marin County, and the permitting reality here is layered – city review plus, in parts of the coastal zone and older overlays, added scrutiny that makes even a bathroom refresh more documentation-heavy than it would be in a neighboring inland town. In the West End and downtown grid, we’re routinely working in early-1900s craftsman and bungalow homes where the wall behind the vanity hides knob-and-tube or early wiring and old galvanized plumbing. In the hillside neighborhoods above downtown and Dominican, homes sit on steep lots behind older retaining walls, and we’ve opened bathroom floors to find slope and drainage issues that flat-lot jobs never see. The Canal district’s older apartments bring their own constraints on access and shared walls. Because so much of the housing stock predates the 1970s, we plan for hidden conditions rather than being surprised by them. We cover all of San Rafael, from the 94901 and 94903 ZIP codes to 94912 and 94913, and this work sits naturally inside a wider Bathroom Remodeling in San Rafael scope when the job grows past fixtures and finishes.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in San Rafael
A single-bath refresh typically takes one to two weeks of working days once materials are on site, with tile cure time being the biggest variable. Call (866) 320-2646 for a schedule tied to your actual scope.
Cosmetic tile, a vanity swap, and like-for-like fixture replacement usually don’t require a permit; relocating plumbing or electrical does. We pull the permits when the scope requires it and price that in the written estimate, so there are no surprises after demo. Call (866) 320-2646 to confirm what your specific job needs.
Yes, and most of our San Rafael jobs stay in place – the vanity, tile, and fixtures get updated within the existing footprint, which saves both time and money. If you want a second sink or a relocated drain, that’s a different (and larger) scope we price separately.
The range runs $9,000 – $28,000, driven mostly by room count, existing condition, material grade, and whether plumbing or electrical moves. Call (866) 320-2646 for an exact quote – the estimate is free and itemized.
Every project we run is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. You also get background-checked, uniformed technicians and live-person phone coverage around the clock; call (866) 320-2646 for details on your job.
Get a Free On-Site Estimate for Vanities, Tile & Fixtures in San Rafael
Tell us what you’re changing and we’ll walk the bathroom with you, measure the vanity opening, and hand you a line-item estimate covering tile, fixtures, labor, and permit scope. If the job grows into a full bath, our Bathroom Remodeling service covers the wider work, and homeowners often pair exterior updates with Tile Roofing in San Rafael or Specialty Roofing in San Rafael while the crew is scheduled. Call (866) 320-2646.
Written by the team at Groundwork Construction Co.