Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in San Rafael, CA: What It Costs and How Long It Takes
Metal roofing in San Rafael typically runs $15,000 – $40,000 for a full residential install, and most jobs take one to two weeks from tear-off to final inspection. That range covers the whole envelope – tear-off, decking repairs, underlayment, panels, trim, and the permit cycle. The number that lands your specific house depends on roof size, pitch, how many penetrations the panels have to skirt, and which metal system you pick. Call (866) 320-2646 and we’ll put a written, line-item estimate in front of you before anything is ordered.
How We Do This Job: The Metal Roofing Process, Stage by Stage
Metal isn’t a “one crew, one afternoon” product, and anyone who tells you otherwise hasn’t installed a panel on a sloped San Rafael hillside lot. Here’s the actual sequence and the decisions that land on your side of the table.
Stage 1: On-site inspection and measurement (day 1). We get on the roof, check the decking, look at the existing underlayment, count penetrations, and photograph the fascia and drip edges. This is where we find out whether the deck is sound or whether we’re adding sheathing. You decide nothing yet – you get a straight read on what’s under there and a written quote.
Stage 2: Permit paperwork and ordering (days 2 – 10). The permit typically takes one to three weeks in San Rafael depending on what the plan reviewer wants to see. You approve the panel choice, color, and profile here – nothing gets fabricated until that’s locked, because metal panels are cut to length and can’t be returned to a warehouse.
Stage 3: Tear-off and prep (days 1 – 3 on site). Old roofing comes off, decking gets inspected and repaired where it’s soft or delaminated, and the underlayment goes down. If the deck is bad, we tell you before we lay a single panel – no surprise invoice.
Stage 4: Panel install and trim (days 3 – 7). Panels go up, fasteners get set at the correct torque, and every edge, valley, and penetration gets flashed. This is the stage where a bad install shows up two winters later as a leak at the chimney or a puddle at the valley.
Stage 5: Final inspection and walkthrough (days 7 – 10). City inspection, then we walk the roof with you, show you the flashing, and hand over the written warranty. Everything is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal roofing isn’t one product. Here are the real choices, with the honest trade-off of each:
- Standing seam panels: the cleanest look, the longest lifespan, and the highest cost. Fasteners are hidden, which reduces leak points. Best for homeowners who plan to stay 15+ years and care about the profile from the street.
- Exposed-fastener panels (screw-down): cheaper and faster to install, but the fasteners are the weak point over decades and need periodic checks. A reasonable fit for outbuildings, garages, or a tight budget.
- Metal shingles and tiles: the “looks like tile or slate” version. Higher material cost, more labor, but it matches the older San Rafael streetscape better than a modern panel profile.
- Paint finish: the finish is what keeps the metal from weathering. A premium Kynar finish holds color longer than a basic acrylic. It’s the single easiest place to overspend or underspend – ask us which makes sense for your roofline.
- Color and profile: the decision homeowners spend the most time on and the one that has the least effect on performance. Pick what you’ll still like in ten years.
On the decking and trim, James Hardie fascia and trim are a common pairing because they hold up to the same wet-dry cycle the metal does. If you’re reworking windows during the same project, homeowners often pair this with Window Replacement in San Rafael so the trim work gets done once.
What Metal Roofing Costs in San Rafael, CA
For a full metal roof installation in San Rafael, budget $15,000 – $40,000 depending on size and system. A small house with a simple gable and a value-line exposed-fastener system comes in near the bottom. A large, steep, multi-plane roof with standing seam and premium trim lands near the top.
The four variables that actually move the number:
- Roof size and pitch: square footage is the biggest single driver. Steep pitches slow the crew down and add safety rigging, so a steep roof costs meaningfully more per square than a walkable one.
- Existing condition: a single layer of old shingles over sound decking is the easy case. Multiple layers, rotted sheathing, or a re-deck adds both material and days.
- System and finish: standing seam costs more than exposed fastener. Premium paint finishes cost more than basic. This is where the range widens fastest.
- Complexity: valleys, dormers, skylights, and chimneys each need custom flashing. A simple roof with four penetrations is a different job than a roof with twelve.
What’s in a written estimate: tear-off, decking inspection and repair allowance, underlayment, panels, trim, flashing, dumpster, permit, and final inspection. What’s not, unless we put it in writing: structural repairs to rafters, changes to the deck, or anything we find behind the existing roof. Our upfront pricing means the number you see is the number you pay – no change orders for work we should have caught on inspection.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the seat of Marin County, and the permitting runs like it. City plan review plus, in areas inside the coastal zone or under older overlays, added documentation the neighboring inland towns don’t ask for. That’s the honest reason metal roofing here takes longer to start than it does elsewhere in the county. We pull the permits and pass the inspections – that’s our job, not yours.
The housing stock is the second factor. Much of the West End and the downtown grid is early-1900s craftsman and bungalow – those roofs often hide 100-year-old decking that needs attention before a single panel goes up. The hillside houses above downtown and Dominican are a different problem: steep lots behind older retaining walls, and a roof pitch that makes access and staging slow.
One thing this climate does that’s specific to San Rafael: we sit in sunny, warm central Marin, sheltered from the fog that blankets points west. Metal performs well here – the panels take heat without the thermal cycling a fog-belt roof sees. The trade-off is the winter rain, which concentrates runoff off the hills and finds every weak flashing on a sloped lot. That’s why we’re particular about valley and penetration flashing here.
We cover the whole city and the ZIP codes that make it up – 94901, 94912, 94913, 94903 – and the surrounding Marin towns like San Anselmo, Larkspur, Corte Madera, and Mill Valley. If you’re pricing a bigger scope, this is often part of a full Roofing in San Rafael project, and you can see our broader Roofing work and the whole San Rafael service area on those pages.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in San Rafael
Most metal roofing installs in San Rafael take one to two weeks on site, plus one to three weeks for the permit. The on-site time is shorter than asphalt only if the deck is sound – if we find rot under the old roof, add two to four days.
Yes. Metal roofing in San Rafael requires a building permit, and the city inspection is part of the process. We pull it and schedule the inspection – you don’t touch the paperwork. Call (866) 320-2646 if you want to know what the current review timeline looks like.
Sometimes, but we don’t recommend it in San Rafael. Metal needs a solid, even deck to sit flat against, and the older homes here often have uneven or soft sheathing underneath. Tear-off gives us a chance to inspect the deck and fix it before panels go on.
Expect roughly $15,000 – $40,000 for a full residential install, which works out to a wide per-square range depending on system, pitch, and complexity. A small simple roof is at the low end; a large, steep, multi-plane roof with standing seam and premium trim is at the top.
Every metal roofing project is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. The panel manufacturer’s finish warranty stacks on top of that, so you’re covered on both workmanship and materials in writing.
Get a Free Metal Roofing Estimate in San Rafael
Call (866) 320-2646 to schedule a free on-site estimate for metal roofing in San Rafael. We’ll get on the roof, tell you honestly what’s under it, and hand you a written, line-item quote with the price locked. No change orders, no surprises, and a live person answers the phone 24/7. Financing is available at 0% for 18 months.
Written by the team at Groundwork Construction Co.