Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in San Rafael, CA: What It Costs and What’s Involved
A wrought iron fence in San Rafael typically runs $3,500 – $9,000 for a standard residential run, and most jobs are finished in two to four working days once materials are on site. That figure covers removal of the old fence, post-setting, and finishing. Call (866) 320-2646 for a free on-site estimate and a written, line-item quote before anything gets ordered.
How We Build an Iron Fence in San Rafael, Stage by Stage
An iron fence isn’t a pickets-and-posts delivery. It’s a fabrication and anchor job, and the sequence matters. Here’s the real order of operations, with the timing we hold to.
Stage 1: Site walk and layout (day 1, about 90 minutes). We walk the property line with you, confirm the run in linear feet, and mark post locations. This is where you decide fence height (typically 4 ft, 5 ft, or 6 ft), panel style, and whether the run includes a driveway gate or a side-yard gate. On sloped lots we flag grade changes now, because iron doesn’t rack to follow a hill the way a wood fence can. Panels either step with the grade or get custom-fabricated to the pitch.
Stage 2: Demo and post setting (day 1 into day 2). Old fencing and footings come out. Posts go into concrete footings set below frost line and below the finish grade line so the base of the iron doesn’t sit in soil or standing water. Footings typically cure overnight, so day 1 ends with posts in the ground and panels staged on site.
Stage 3: Panel and rail assembly (day 2, most of the day). Panels are leveled, plumbed, and fastened to the posts. Welded panels go in faster than field-assembled ones. This is where you’ll see the fence take shape.
Stage 4: Gates and hardware (day 3, half day). Gate hinges, latches, and any self-closing hardware install here. If you want a keyed lock on a side gate, this is the moment to spec it, not after the fact.
Stage 5: Finish touch-up and walkthrough (day 3, 1 – 2 hours). We touch up any weld or scratch points, check every post, and walk the finished run with you. If any part isn’t right, the 730-Day Done Right Promise covers it. Our technicians have up to 12 years of experience with iron and metal fencing, and every one arrives background-checked and in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fence looks like one product and is really a family of them. Here’s what actually changes the job:
- True wrought iron vs. steel vs. aluminum. Genuine wrought iron is heaviest and longest-lived, and priced highest. Powder-coated steel is the practical workhorse and holds up well in inland Marin. Aluminum is lightest and cheapest, but it dents and flexes where steel won’t. For San Rafael’s sun and mild climate, all three perform; the difference is weight, cost, and how the fence feels at the gate.
- Powder-coated vs. painted finish. Factory powder coat is the default and wears better than field paint. Painted finishes cost less upfront and need re-touch every few years. Black is standard; bronze and dark green are common upgrades.
- Panel style. Flat-top, spear-top, and arched panels are all standard. Custom panel heights and spacing cost more and add lead time to fabrication.
- Gate hardware. Hinges, latches, and a keyed lock are all selectable. Self-closing hinges and ADA-compliant latch hardware cost more but matter on a pool-adjacent run.
- Footing depth and anchoring. Sloped or hillside lots need deeper, engineered footings, and that’s a real line item.
We’ll walk you through each choice in writing so you can compare it side by side, and we don’t lock in a change order after the fence is fabricated.
What Iron Fence Costs in San Rafael, CA
Most residential iron fence jobs in San Rafael land between $3,500 and $9,000. That range covers a standard side-yard or front-yard run with a walk gate on a reasonably flat lot. Here’s what moves a job toward either end:
- Run length. Linear feet is the biggest driver. A short 30-ft side run sits at the low end; a 100-ft perimeter lands near the top.
- Material. Aluminum sits at the low end; powder-coated steel and true wrought iron push toward the high end.
- Grade and slope. Flat lots are cheaper. Hillside runs in the neighborhoods above downtown and Dominican need stepped or custom-fabricated panels and deeper footings, which add cost.
- Gates. A basic walk gate is one line item. A driveway gate with keyed hardware and self-closing hinges adds meaningfully.
- Demo and haul-away. Removing an existing fence and its old footings is a real cost, especially on a run with concrete footings.
Your written estimate is itemized: linear feet, material and finish, gate hardware, footings, demo, and permit. What’s typically not included is landscaping repair after demo, utility relocation if a line is in the footing path, and any custom fabrication beyond the standard panel run. Those are quoted separately, in writing, before work starts.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the seat of Marin County, and the housing stock here shapes an iron fence differently than a newer inland subdivision would. In the older settled neighborhoods (the West End, Gerard, Dominican, the downtown grid) you’re working around homes that predate the 1970s, which means older concrete footings, aged utility runs, and property lines that don’t always match the plat. In the hillside areas above downtown and Dominican, homes sit on steep lots behind older retaining walls and cribbing, and grade changes mean panels have to step or be fabricated to pitch, and posts need engineered footings. That’s a different job than a flat-lot run in the Terra Linda tract, and it’s why we walk the line before quoting.
Permitting is the other reality. San Rafael runs a layered review, and the city’s older overlays and coastal-zone areas add documentation the inland towns don’t. We pull the permits and pass inspection for you. If the run is part of a full Fence Installation in San Rafael project, we’ve priced those combined scopes many times over, and our Fence Installation service covers the wider property. Homeowners in San Rafael frequently pair an iron fence with Patios, Walkways & Pool Decks in San Rafael when the front yard gets re-done at the same time, and with ADU Design & Permitting in San Rafael when the backyard fence is part of a larger addition. We work across all of San Rafael, including the 94901, 94903, 94913, and 94915 ZIP codes.
The failure mode we see on older San Rafael iron fences is footings that have tipped, not rails that have rusted. Winter rain concentrates runoff on the hillsides, and a post footed in saturated soil leans within a few seasons. The fix is a deeper, engineered footing, not a re-weld. If your existing fence leans, that’s what we look for first.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Iron Fence in San Rafael
Most iron fence runs in San Rafael are finished in two to four working days once materials are on site. Day 1 is layout and post setting, day 2 is panel and rail assembly, and day 3 is gates, hardware, and walkthrough. Custom-fabricated panels add a week or more of lead time before day 1. Schedule a free estimate by calling (866) 320-2646.
Yes, most fence installations in San Rafael require a permit, and that includes iron fence. The exact threshold depends on height and location, and hillside or coastal-zone lots carry additional review. We pull the permit for you and pass inspection before we call the job done. Call (866) 320-2646 for a straight answer on your property line.
In most cases, yes. We set posts in discrete footings rather than trenching a continuous line, so landscaping disruption is limited to the post holes and the demo footprint. If a buried utility line runs along your property line, that’s a real constraint we identify on the site walk before quoting. Call (866) 320-2646 to schedule a walk.
Iron fence in San Rafael costs $3,500 – $9,000 for a standard residential run. Run length, material, grade and slope, gate hardware, and demo of any existing fence are the variables that push the number up or down. Call (866) 320-2646 for a written line-item quote; estimates are free.
Every iron fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, and it’s one of the longest workmanship guarantees in residential construction. Call (866) 320-2646 if your existing fence needs a second look.
Get a Free Iron Fence Estimate in San Rafael
Call (866) 320-2646 to schedule a free on-site estimate for your iron fence in San Rafael. A live person answers around the clock, and we’ll walk the property line with you, confirm linear feet and gate locations, and hand you a written, itemized quote with upfront pricing. No surprise line items later. Our technicians have up to 12 years of experience and arrive background-checked and in uniform.
Written by the team at Groundwork Construction Co.