Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in San Anselmo: what it costs and how long it takes
Metal roofing in San Anselmo typically runs $15,000 to $40,000 installed, and most homes are finished in 3 to 7 days once materials are on site. The low end is a straightforward standing-seam or metal shingle job on a simple gable over a single-story bungalow; the high end is a steep, cut-up hillside roof with panel fabrication timed around atmospheric-river rain windows off Mount Tamalpais. Call (866) 320-2646 for a free on-site estimate with a written, line-item number.
How the job actually runs, day by day
Metal roofing is a sequenced build, not a weekend patch. Here’s what happens from the first walkthrough to the final inspection, so you know what you’re deciding and when.
- Day 0 – on-site estimate and moisture check. We measure every plane and pitch, inspect the existing deck and underlayment, and check for rot at the eaves and valleys. You get a written scope and price before anything is ordered. This is where you decide panel profile and color.
- Day 1 – tear-off and deck inspection. The old roof comes off, and the sheathing is exposed and checked for soft spots, water staining, and fastener condition. On San Anselmo’s older Craftsman stock, this is the moment we find out whether a re-deck is needed. You approve any deck repair in writing before we continue – no surprise line items.
- Day 2 to 3 – underlayment and flashing. We install the ice-and-water and synthetic underlayment, then the drip edge, valley metal, and pipe boots. Flashing is where a metal roof lives or dies, so this stage is not rushed. You confirm any skylight or vent relocations here.
- Day 3 to 5 – panel or shingle installation. Panels are set and fastened per the manufacturer’s spec, or metal shingles are laid course by course. Steep pitches go slower. You’ve already chosen the profile, so this is execution, not decision-making.
- Day 5 to 7 – trim, cleanup, and final inspection. Ridge caps, closures, and gutters go on, the site is swept and magnet-swept for fasteners, and we walk the roof with you. If your project pulled a permit, the inspection is scheduled here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Metal roofing isn’t one product. What you pick changes the price, the look, and how long it lasts. Here’s the honest trade-off on each.
- Standing seam panels – the premium choice. Long, clean vertical lines with concealed fasteners, so there’s nothing to back out or leak at a screw. Costs the most and suits a modern or clean-lined home. On San Anselmo hillside roofs the panel runs are longer, which means more on-site fabrication.
- Metal shingles – a stamped profile that mimics shake or tile. Cheaper than standing seam and a good fit for the Craftsman and bungalow look in the flats. Fasteners are exposed, so the install quality matters more.
- Exposed-fastener corrugated panels – the budget option. Effective and quick, but the washers and screws are the wear point. Fine for a shed or a rental; a harder sell on a primary home.
- Finish and color – a standard color is included; a premium or custom color adds cost and lead time. A lighter color reflects heat, which helps on a sun-baked south-facing plane.
- WUI-rated assemblies – along the wooded slopes, the assembly needs to meet wildfire ignition-resistant requirements, so underlayment and edge details get specified to that standard rather than the cheapest option.
What Metal Roofing costs in San Anselmo, CA
Most San Anselmo metal roof installs land between $15,000 and $40,000. What pushes a job toward the top of that range:
- Roof size and pitch. Square footage is the biggest driver, and steep hillside pitches add labor and safety time.
- Existing condition. A re-deck, rot repair, or new flashing detail adds to the base number. A sound deck keeps it at the low end.
- Material grade. Standing seam sits at the top; metal shingles and corrugated sit below it.
- Complexity. Valleys, dormers, skylights, and multiple roof planes all add fabrication and labor.
- Permit scope. A full reroof permit with inspection adds cost and calendar time versus a repair.
A written estimate should list tear-off, deck repair allowance, underlayment, flashing, panels, trim, cleanup, and permit. What’s often left off other bids: deck repair, skylight re-flashing, and disposal. We put those in writing so the number you see is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo homes specifically do to this job
San Anselmo sits in the San Anselmo Creek watershed at the foot of Mount Tamalpais, and that shapes the work in ways a flat-inland roofer won’t anticipate. The downtown corridor along Sir Francis Drake Boulevard floods repeatedly, and the wet winters bring intense atmospheric-river storms off the mountain. That means roofing here is seasonal and storm-driven – we time tear-offs around rain windows, because an open deck in a San Anselmo downpour is a real risk. On the flats, the early-1900s to 1950s Craftsman and bungalow homes often have original sheathing that needs attention once the old roof comes off. Up the slopes toward Sleepy Hollow and the Ross border, the steeper mid-century homes and the wildfire-risk interface mean roofing assemblies have to meet WUI ignition-resistant requirements. Storm damage and leaks on these roofs often get handled under our emergency roofing work, and a full metal roof is frequently part of a broader Roofing in San Anselmo scope. If you’re also upgrading the exterior, homeowners often pair this with Window Replacement in San Anselmo.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Metal Roofing in San Anselmo
Most San Anselmo metal roofs are finished in 3 to 7 days once materials are on site, with steep or complex hillside roofs at the longer end. Weather windows matter here because of the storm season, so we schedule around them. Call (866) 320-2646 for a timeline on your specific roof.
Yes, a full reroof generally requires a permit and inspection, and we pull it and pass the inspection for you. Work near the creek or on a flood-zone property can involve additional review. Ask us to confirm the scope for your address when we estimate.
In most cases no – a metal roof replaces the covering over your existing framing. Structural work only comes up if the deck has rot or a new profile needs added support, and we flag that before the job starts.
Most jobs run $15,000 to $40,000, driven by size, pitch, material grade, and existing condition. Call (866) 320-2646 for an exact written quote – estimates are free.
Every metal roof install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction, plus the manufacturer’s material warranty. If it’s not done right, we make it right.
Get a free Metal Roofing estimate in San Anselmo
Call (866) 320-2646 to schedule a free on-site estimate for metal roofing in San Anselmo. A live person answers around the clock. We’ll measure the roof, check the deck, and hand you a written line-item price with no surprises, plus 0% financing for 18 months and $1,000 off projects over $10,000. From foundation to finish line, one call covers it.
Written by the team at Groundwork Construction Co.