Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Novato: Scope, Timing and Price
Vanities, tile & fixtures in Novato runs $9,000 – $28,000 depending on how much plumbing you move, the tile you pick, and whether the room is a Hamilton Field gut or a San Marin ranch refresh. Most single-bathroom jobs take 2 – 4 weeks from demo to final caulk. Call (866) 320-2646 and we’ll price yours against your actual layout, not a phone guess.
How the Vanities, Tile & Fixtures Job Actually Runs
Here’s the real sequence, start to finish. What follows is what you’ll decide and when, because waiting on a decision holds up a trade and holds up your bathroom.
Stage 1 – Site visit and written scope (day 1). We measure the room, check valve sizes and drain locations, and look at what the walls are hiding behind the existing vanity. You leave with a line-item quote in hand and one decision to make first: keep the plumbing where it is, or move the toilet, shower or sink. That call drives everything downstream, including whether we’re filing for a permit.
Stage 2 – Demo and rough prep (days 2 – 4). Fixtures come out, vanity and tile come off, and we open the wall enough to see the supply lines and drain stub-out. In Novato’s older stock we sometimes find galvanized pipe or dated drain lines back there. You decide then: reuse what’s sound, or replace the rough plumbing while it’s open. It’s cheaper now than later.
Stage 3 – Substrate, waterproofing and layout (days 4 – 7). Cement board or a foam backer goes up, seams get taped and the waterproofing gets coated. Then you and the setter confirm tile layout: full tile off the corners or centered on the shower valve. We lay it out dry and photograph it so you’re approving the exact grout-line pattern before the first thin-set goes down.
Stage 4 – Tile setting and grout (days 7 – 14). Wall tile, shower floor with proper slope to the drain, grout, and a curing window. Decorative or mosaic work adds time; large-format porcelain goes faster but needs flatter substrate. Grout sealer goes on after the cure, not the same day.
Stage 5 – Vanity set, fixtures and final walk (days 14 – 21+). Vanity cabinet, top and sink drop in, faucet and trim get connected, mirror and lights go up, then we walk the whole room with you and fix the punch list before we’re gone. The 730-Day Done Right Promise stays live for two years after that walk.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Pick Between for Vanities, Tile & Fixtures
- Vanity cabinet: stock, semi-custom or full custom. KraftMaid and Wellborn sit in the semi-custom range with real plywood boxes and dovetail drawers. Custom buys you an odd width to the inch, but the lead time is longer and the price reflects it.
- Lumber-core plywood vs. MDF boxes: plywood holds up far better in a wet bathroom, and it’s the choice for the long horizon. MDF is cheaper but swells at the toes when the floor gets soaked.
- Vanity top: quartz (Cambria and similar), granite, or a solid-surface. Quartz is the easy pick for almost everyone: non-porous, no sealing, resists stains. Stone needs periodic sealing and gains the vanity weight.
- Under-mount vs. vessel sink: under-mount keeps the counter clean and holds up to daily use. Vessel is a look, not a convenience – it eats counter depth and catches water at the rim.
- Tile material: porcelain for floors, ceramic or porcelain for walls, natural stone (marble, travertine) where you want the upscale look. Stone costs more, needs sealing, and shows every blemish if it’s honed.
- Grout: epoxy doesn’t stain but is more expensive and unforgiving to install. Traditional cement grout seals fine if you don’t neglect it.
- Fixtures: Kohler or similar paired with a pressure-balanced shower valve is the safe open. Thermostatic valves, brushed nickel, matte black – pick the style, but don’t cut the valve.
What Vanities, Tile & Fixtures Costs in Novato, CA
The lead range is $9,000 – $28,000 for a bathroom job that touches vanities, tile and fixtures together. Where you land in that band comes down to five things:
- Room size and tile coverage: A 5×8 half-bath sits near the $9,000 floor; a 6×9 with full wall tile pushes toward the top.
- Plumbing relocation: Moving a drain or valve within a few feet adds cost, and moving a whole toilet wall costs more. Where we can reuse the existing stub-outs, you save both money and time.
- Material grade: Stock vanity + porcelain + Kohler is the low end. Semi-custom KraftMaid or Wellborn cabinets, Cambria quartz top and stone-look tile help push the number up.
- Existing condition: Replacing the backer and rough plumbing costs more than reusing sound walls, and a gut with rotted wallboard behind the old vanity always costs more.
- Permit scope: A cosmetic refresh can be quote-only; a layout change that touches plumbing or structure needs a permit and an inspection.
Our written estimate covers demo, rough prep, tile, vanity, fixtures, labor and cleanup. It doesn’t cover structural repair discovered after the walls open, or moving a drain when you choose to relocate the sink to the far wall. We price those as they come up, in writing, before we do them.
See the difference
Before
After
Before
After
Before
AfterWhat Novato Homes Specifically Do to This Job
Novato straddles the Petaluma Gap wind corridor and the fog line, and the housing stock reflects that: Hamilton Fleet duplexes and ranch houses in the Ignacio and San Marin areas. In those homes, our crew sees tile grout lines fail prematurely, which is expected when the room was never built with a modern waterproofing layer. On a recent half-bath refresh near Hamilton, the existing tile was sound and the wall behind it turned out to be 1950s drywall over furring strips. That’s the pattern we plan for. When a Hamilton job triggers a door, window or exterior scope, homeowners often pair this with Specialty Roofing in Novato if the roof is on the same wall. When the tile repair reaches a gut, or the roof assembly needs attention at the same time, homeowners often pair this with Tile Roofing in Novato. We pull the permit and schedule the inspection on any job that touches plumbing or structure. We serve those ZIPs across 94947, 94998, 94945 and 94948.
What that means in practice: on a layout-change job in Hamilton, we plan for an inspection hold, and we tell you that at the estimate not after the drywall is up. If the bathroom is part of a full Bathroom Remodeling in Novato that also moves walls or adds a closet, we scope the whole thing as one project so the permits and inspections line up. For more general scope on the same room, our Bathroom Remodeling service page walks through the wider job; this page stays focused on the vanity, tile and fixture work. We cover all of Novato this way.
Serving Novato, CA – Our Local Coverage Area
We serve Novato and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Novato
Most jobs run 2 – 4 weeks from demo to final walk. A cosmetic refresh with no plumbing movement sits at the short end; a full gut with a layout change and an inspection lands at the long end. Add 3 – 5 business days if we’re pulling a permit and waiting on an inspection slot.
Cosmetic replacement of a vanity, tile or fixtures typically doesn’t need one. Moving a drain, adding a shower, or changing a toilet location usually does, and older homes with dated plumbing can trigger it even on a refresh. We check the permit scope at the estimate and include it in writing if it applies.
Yes, and that’s the most common path. Reusing the existing stub-outs keeps the number lower and shortens the timeline. A vanity swap and re-tile without moving plumbing is the low end of the $9,000 – $28,000 range.
$9,000 – $28,000 depending on room size, plumbing movement, material grade and permit scope. A half-bath refresh sits near the floor; a full 6×9 with semi-custom cabinetry, a quartz top and full wall tile pushes toward the ceiling. Call (866) 320-2646 for an exact line-item quote – estimates are free.
Every job is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right, for two years after the final walk. Our technicians have up to 12 years of experience with vanities, tile and fixtures.
Get a Free Estimate on Vanities, Tile & Fixtures in Novato
Call (866) 320-2646 for a free on-site estimate. We’ll measure the room, check what the walls are hiding, and hand you a line-item written quote before you commit to anything. No vague ranges, no change-order surprises. We answer live, 24/7, and we’ll tell you straight whether your job needs a permit or can stay a same-visit swap. From vanity and tile selection to the final walk, we run it as one project.
Written by the team at Groundwork Construction Co.