A Groundwork company - serving San Francisco, CA
Iron Fence in Petaluma, CA | Groundwork Construction Co. of San Francisco

Iron Fence in Petaluma - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Petaluma: What It Costs and How Long It Takes

An iron fence in Petaluma runs $3,500 to $9,000 for most residential runs, with the number driven mostly by linear footage, gate count and whether the fence is light-gauge ornamental steel or heavier wrought-iron work. A typical 100-foot front-yard run with one walk gate takes three to five working days to install once the fence is fabricated, and fabrication itself adds another two to three weeks. Call (866) 320-2646 and we’ll walk your property, measure the run, and hand you a written line-item estimate.

Call (866) 320-2646

How the Job Actually Runs, Stage by Stage

Iron fence work doesn’t follow the same rhythm as a wood fence, because the panels are manufactured rather than built on site. Here’s the real sequence we follow on a Petaluma project.

Stage 1: Site visit and field measure (1 hour). We walk the property line with you and confirm where the fence goes, how many gates you want, and whether the fence needs to tie into an existing structure or masonry wall. We also check the ground: driveway edges, sprinkler runs, and existing concrete that we’ll need to cut and reset. You decide the run layout and gate placement (or hand us the decision) at this point, because layout drives the fabrication order.

Stage 2: Layout, elevation call, and quote (1 to 3 days). We set the final linear footage, pick grades and finishes with you, and issue a written line-item estimate. This is where the metal grade gets locked, and it’s the stage where most of the budget conversation happens. You confirm the color, the picket spacing, and the post height. Once you sign, the fence panels go into fabrication.

Stage 3: Fabrication and permit filing (2 to 3 weeks). The panels are cut, primed and powder-coated, and the posts are prepared. During this window we handle the permit application if the run fronts a public street or crosses an easement. You don’t have to watch this stage, but you do decide here whether you want a matching pedestrian gate, a vehicle gate, or both.

Stage 4: Demo and prep (1 to 2 days). We pull out the old fence, saw-cut any concrete where new posts land, and auger the post holes. On the west side the holes often hit the raised-foundation and flood-plane ground near the river corridor, so concrete is poured deeper and footings get sized up. You decide at the start of this stage whether the old fence gets hauled off or you keep it.

Stage 5: Set, weld, and final walkthrough (2 to 3 days). Posts are set in concrete, allowed to cure, then the panels and gates go up and the hardware gets aligned. We do the final walkthrough with you, checking gate swing, latch engagement and every post for plumb. The team has up to 12 years of experience on this kind of install, and the whole thing is covered by our 730-Day Done Right Promise.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Three buying decisions shape an iron fence more than anything else: metal grade, finish, and gate setup. Here’s the honest trade-off on each.

  • Light-gauge ornamental steel (the budget pick): Fits the low end of the $3,500 – $9,000 range and suits a simple backyard boundary. The panels are lighter and the welds are thinner, so it flexes more and starts to show wear faster in a wet coastal winter. Fine for a short run where the view of the fence barely matters.
  • Heavier wrought-iron or tubular steel (the upgrade): Adds real cost but holds its shape, resists impact from a mower or a car door, and takes a powder-coat finish that lasts. This is the right call on any front-yard run, on a corner lot, or anywhere the fence is the street-facing feature of the house.
  • Powder-coated finish versus paint: Powder coating is baked on and handles Petaluma’s cool, damp winters far better than field paint. Paint chips and needs retouching every few years, so on a run near the river corridor we lean toward a powder coat every time.
  • Gate choices: A swinging walk gate with a self-closing latch suits most homes. Driveway or vehicle gates are a different fabrication and a different price tier. Sliding gates cost more but save swing radius on a tight driveway.
  • Post mounting: Set-in-concrete posts are the durable standard. Surface-mounted posts on an existing concrete pad are faster and cheaper but offer less wind resistance, which matters on an exposed lot.

What an Iron Fence Costs in Petaluma, CA

Plan on $3,500 to $9,000 for a typical residential iron fence in Petaluma. The line items below show how that range breaks apart, so you can see what moves the number.

Line item Typical range
Ornamental steel fence, basic run $3,500 – $5,500
Heavier wrought-iron / tubular steel $6,000 – $9,000
Pedestrian gate (swing) Included to +$800
Powder-coat finish upgrade +$400 – $1,200
Concrete demo and post reset +$300 – $900
Permit filing (street frontage) Varies by scope

Five variables push a job to either end. Lineal footage is the biggest driver. Metal grade and finish run second. Gate count and gate type add up fast. Site conditions – old concrete to cut, uneven ground, or a lot sloping toward the river corridor – add labor. And permit scope on a street-facing run adds both time and a fee. The written estimate spells out what’s in (fabrication, demo, posts, concrete, one gate, cleanup) and what’s typically out (landscape repair, old gate hardware you keep). Upfront pricing means the number you see is the number you pay. Rather price this out? Call (866) 320-2646 for a free estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Petaluma Homes Specifically Do to This Job

Petaluma’s split housing stock changes how we approach an iron fence. Downtown and the west side hold Victorian and early-1900s homes on raised foundations, many near the Petaluma River, and a street-facing iron fence on one of those lots often triggers design review before the fence goes in. A small exterior change that’s a same-day permit in a tract subdivision gets a review cycle here because of the historic-preservation scrutiny downtown. East of the river, in the 1980s-2000s stucco neighborhoods off McDowell and East Washington, the process is simpler and the lots are flatter, so the install timeline is mostly fabrication. The other local factor is the climate: foggy summers and wet winters mean a fence along the river corridor takes real moisture, and that’s where powder-coat finishes and deeper footings pay off. In those river-adjacent yards along the west side, we also see older posts that rotted at grade and no longer hold plumb, so we plan for post replacement rather than reuse. Homeowners here often pair a new iron fence with Patios, Walkways & Pool Decks in Petaluma when the yard is being re-graded at the same time. If the fence is part of a full Fence Installation in Petaluma plan, we scope it as one project.

Our fence work is part of the Fence Installation service we run across Petaluma, and we also handle ADU Design & Permitting in Petaluma for homeowners adding a unit in back, where the fence line often needs to move.

Serving Petaluma, CA – Our Local Coverage Area

We serve Petaluma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Petaluma

Get a Free Iron Fence Estimate in Petaluma

Call (866) 320-2646 for a free on-site estimate on your iron fence in Petaluma. A live person answers around the clock, and we’ll set a time to walk your property line, measure the run and confirm gate placement. You’ll get a written line-item quote with upfront pricing, no surprises, and we’ll spell out what the permit requires on your lot before we schedule anything.

Written by the team at Groundwork Construction Co.

Why Petaluma Chooses Groundwork Construction Co. of San Francisco

We set the standard for iron fence in Petaluma.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Petaluma

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Petaluma Customers Say

Trusted by homeowners across Petaluma and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Petaluma?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Petaluma.

(866) 320-2646

Request a Free Estimate in Petaluma

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch