Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Patio Installation Cost in San Francisco?
Paver patio installation in San Francisco typically costs $4,130 to $12,980 for a residential project, with most homeowners landing near the middle of that range for a standard 200 to 350 square foot patio in durable concrete or clay pavers. A small backyard patio with basic materials can come in closer to the low end, while larger footprints, premium stone, and sloped lots push toward the top. The final number depends on square footage, paver type, site prep, and how much grading and drainage work your yard needs before a single paver goes down.
We give you a written, upfront price before any work starts – the number you see is the number you pay. Calls are answered by a live person 24/7, so you’re not leaving a message and waiting until Monday.
Key Takeaways
- Typical San Francisco range: $4,130 to $12,980.
- Site prep and drainage usually drive more of the cost than the pavers themselves in this climate.
- Sloped lots, hillside grading, and tight access on narrow streets add real labor.
- Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise.
- Free project estimate and design consult – call (866) 320-2646.
Paver Patio Installation Cost Breakdown (2026)
Here’s how the line items stack up for a typical patio project in San Francisco. These are 2026 market ranges for planning your budget. Your exact quote depends on your yard, so we walk the site and price it in writing.
| Line Item | 2026 Price Range |
|---|---|
| Paver patio installation (full project) | $4,130 – $12,980 |
| Excavation and site prep | $800 – $2,600 |
| Base gravel and compaction | $600 – $1,900 |
| Drainage and grading work | $500 – $2,400 |
| Paver materials (concrete, clay, or stone) | $1,200 – $4,800 |
| Installation labor | $900 – $3,200 |
| Edge restraints and polymeric joint sand | $250 – $800 |
What pushes a project toward the high end and what keeps it low comes down to a few things. A flat, easy-to-reach backyard with good soil is the best-case scenario. A sloped lot in a hilly neighborhood, tight access down a narrow alley, or soil that needs extra drainage correction adds labor and materials. The pavers matter too: standard 4×8 concrete pavers sit at the low end, while clay brick, travertine, and natural stone climb toward the top. Grading and drainage alone can account for a big chunk of the total in San Francisco, where rain and hillside runoff are real design problems, not afterthoughts.
What Affects Paver Patio Installation Pricing in San Francisco
San Francisco isn’t a flat, easy market to build a patio. Fog, rain, hills, and tightly packed lots all show up in the price. Here’s what moves the number most.
- Slope and grading. Much of the city is built on hills, from Noe Valley’s stair-streets to the slopes above Glen Park. A patio cut into a grade needs retaining, terracing, or extra excavation, and that gets priced in.
- Drainage. Our wet winters mean water has nowhere to go if drainage isn’t planned. We size and slope patios to shed water away from the house, and that base and drainage work is often the largest variable line item.
- Access. Narrow streets, long stair approaches, and patios behind the house with no side gate access add labor. Hauling base gravel and pavers by wheelbarrow down a steep side yard takes more hours than backing a truck into a driveway on the Peninsula.
- Paver type. Standard concrete pavers are the budget choice. Clay brick and natural stone cost more per square foot but hold up beautifully and add real character to a backyard in a market where outdoor space is precious.
- Square footage. Cost scales with size, but not perfectly in a straight line. Larger patios sometimes cost less per square foot because mobilization and prep get spread across more area.
- Permits and HOA rules. Some projects, especially those attached to a structure or affecting drainage tied to the property line, need plan review. We’ll tell you upfront whether your project needs a permit and handle the paperwork when it does.
If you want to see how this fits into the bigger picture of a yard project, our home page lays out the full range of work we take on. And if you’re comparing a paver patio against other hardscape options, our San Francisco service area page covers what we handle across the city.
How to Save on Paver Patio Installation
We don’t believe in a cheap patio that cracks in two winters. What we do believe in is getting you the right patio for less money through smart choices, not corner-cutting.
- Get the size right the first time. A patio that matches how you actually use the yard costs less than one you outgrow in a year and have to expand. We’ll talk through furniture, grills, and foot traffic during the design consult.
- Choose standard concrete pavers where they make sense. They’re durable, they come in plenty of colors and finishes, and the savings let you spend more on drainage and base work that actually protects the investment.
- Bundle with other yard work. A paver driveway or fence project alongside the patio spreads mobilization cost across the job. Our driveway & pavers service pairs naturally with patio work.
- Time it right. Late fall and winter patio projects can sometimes be scheduled more flexibly than peak spring and summer slots. Ask about timing when you call.
- Use the standing offers. We currently run $1,000 off projects over $10,000 and 0% financing for 18 months. That spreads a larger patio project into a monthly number that fits your budget, with no financing games.
The place to start saving is a free project estimate and design consult. Call (866) 320-2646 and a live person will pick up, any hour, to get you on the schedule.
What’s Included in a Groundwork Paver Patio Project?
Every job starts with a site walk and a written quote, and every job ends with a final walkthrough where we don’t hand over the keys until you’re satisfied. Between those two points, here’s what’s included:
- Design and layout. We help you pick paver style, color, and pattern, and lay out the footprint so it fits the yard and the house.
- Excavation and base. Removing old surface material, digging to depth, and building a compacted base with the right aggregate. This is the part of the job you can’t see once it’s done, and the part that most affects how long the patio lasts.
- Drainage. Grading the patio to shed water, plus any French drains, swales, or uphill intercepts needed to keep water out of your foundation.
- Installation. Setting pavers true and level, cutting edges clean, and finishing with edge restraints and polymeric sand.
- Cleanup and walkthrough. Hauling away debris and walking you through the finished work.
All of it is backed in writing by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Our background-checked, uniformed technicians arrive ready to work, not to fill an empty schedule.
How Long Does Paver Patio Installation Take?
Most residential patios are finished in 3 to 7 working days once materials are on site. A small, flat patio with simple access runs toward the shorter end; a larger patio with drainage work or hillside grading runs longer. Weather can add days, and in a wet San Francisco winter we build weather days into the schedule rather than promising a date we can’t hit.
Material lead time matters too. Concrete pavers are usually quick to source, but natural stone varieties and specialty colors may take longer to arrive. We tell you the timeline in the estimate so you know the real schedule, not the optimistic one.
Is It Cheaper to Repair or Replace a Paver Patio?
For a patio that’s mostly sound with a few problem spots, repair typically runs $500 to $2,500, which is generally cheaper than a full replacement. The decision comes down to what’s failing. Loose pavers and washed-out joints can often be reset and re-sanded. But if the base is failing, if there are widespread low spots holding water, or if the pavers are heaved by roots, patching is a band-aid and the base needs rebuilding. We’ll tell you honestly which situation you’re in before you spend money on either.
Call (866) 320-2646 for a free assessment. Estimates are free and there’s no pressure to go one way or the other.
Can You Install a Paver Patio on a Sloped Yard or Hillside?
Yes, and it’s common work in San Francisco. A sloped yard almost always needs terracing or a retaining wall, and sometimes both. Retaining adds cost, typically several hundred to a few thousand dollars depending on height and length, but it’s what keeps a hillside patio stable and safe. We engineer the base and retaining for the actual grade, not a typical flat-yard design.
Terracing can turn a genuinely unusable hillside into a yard you actually use. The key is doing the retaining and drainage correctly the first time so water and gravity don’t undo the work. That’s the kind of project the 730-Day Done Right Promise is built for.
Material Options and What They Cost
Paver choice affects both the look and the longevity of your patio. Here’s the rough ranking by cost, from lowest to highest per square foot for materials.
- Concrete pavers. The most budget-friendly, with dozens of colors and shapes. Durable and easy to repair if a single unit gets damaged.
- Clay brick. Classic, warm, and dense, with a look that fits San Francisco’s older neighborhoods well. Pricier than concrete but a lifetime material.
- Natural stone. Travertine, bluestone, and slate. Highest material cost, beautiful finish, and the heaviest, which means more labor to set.
- Permeable pavers. An option worth considering where drainage is tight. They let water pass through to the base, and they run slightly higher than standard concrete pavers.
If you’re weighing a paver patio against other outdoor surfaces, our paver and hardscape work covers driveways, walkways, and more, so you can see how the materials and budgets fit together across a whole property. Homeowners planning a larger backyard transformation often pair patio work with a fence installation or a home addition or ADU that opens onto the new outdoor space.
Why Homeowners Choose Groundwork Construction Co. of San Francisco
We’ve been in business since 2014, and we built the company around removing the guesswork from big projects. That shows up in a few concrete ways on a paver patio job:
- Upfront pricing, no surprises. The number you see in your written quote is the number you pay. If the scope changes, we tell you before work proceeds.
- Live person, 24/7. A real person answers the phone at any hour. No voicemail black holes, no waiting until Monday.
- 730-Day Done Right Promise. If the work isn’t right, we make it right. For two full years.
- Background-checked, uniformed technicians. The people in your yard are verified professionals, not an unmarked crew.
- Curated brand partners. We work with known material brands across every category we serve, so you’re choosing quality, not just what happens to be available.
- 0% financing for 18 months and $1,000 off over $10,000. Both stand behind larger projects so a quality patio becomes affordable.
If you’re also looking at a bigger plan for the house, from kitchens to kitchen remodeling or bathroom remodeling, we handle the whole scope with one accountable contractor – from foundation to finish line.
FAQs – Paver Patio Installation Cost in San Francisco
How much does a 300 square foot paver patio cost in San Francisco?
A 300 square foot paver patio in San Francisco typically runs $5,500 to $9,800, depending on paver type, site access, and drainage needs. A flat backyard in good soil lands near the middle of that range. A sloped yard or a tight-access lot lands toward the top. Call (866) 320-2646 for an exact quote after a site walk.
Is paver patio installation worth the cost?
For most San Francisco homeowners, yes. Pavers last decades, are easy to repair individual units without replacing the whole surface, and add resale value to a yard. When outdoor space is scarce, a well-built patio earns its keep in usable square footage. The key is a proper base and drainage, which is where we put most of our attention.
Can you install a paver patio in the winter in San Francisco?
Yes, with planning. Our mild winters allow patio work most months, though we watch the weather and build in weather days during the wet season. Drainage work is especially important in winter installs. Call to ask about scheduling – we answer any hour. Our roofing service also picks up winter work when storms expose leaks.
How much does it cost to remove and replace an old patio?
Removing an old patio and installing a new one typically adds $600 to $2,000 to the standard paver patio range. Breaking out concrete, hauling debris, and redoing the base all come with removal work. We quote the removal and replacement together so there’s no surprise line item later.
Do I need a permit for a paver patio in San Francisco?
Many simple patios on grade do not require a building permit, but patios that involve retaining walls, structural attachments, or changes to drainage tied to the property line may need review. Our team walks you through what applies to your project and handles the paperwork when permits are needed. Call (866) 320-2646 and we’ll tell you before work begins.
Get a Free Paver Patio Estimate in San Francisco
A backyard you don’t use is money sitting on the shelf. A well-built paver patio gives you outdoor space you’ll use from spring through fall, and it’s one of the most durable improvements you can make. We’ll walk your yard, plan the layout around how you actually live outside, and give you an upfront price before any work starts. That price is backed by the 730-Day Done Right Promise and stands behind every project we take on.
Call (866) 320-2646 for a free project estimate and design consult. A live person answers, 24 hours a day. We serve homeowners across San Francisco and the surrounding communities.
Pricing reflects the San Francisco market as of 2026. Groundwork Construction Co. of San Francisco offers free estimates – call (866) 320-2646.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan