A Groundwork company - serving San Francisco, CA
Groundwork Construction Co. of San Francisco construction team

Aluminum Fence Installation Cost in San Francisco - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Aluminum Fence Installation Cost in San Francisco?

Aluminum fence installation in San Francisco typically costs $4,720 to $11,800 for a standard residential run, with most homeowners landing near the middle of that range for a 100- to 150-foot perimeter. The floor of that range covers a straightforward side-yard run on flat ground, while the ceiling reflects long frontage, difficult slope, or custom ornamental panels on a hillside lot. Same-week estimates are available, and the number we quote is the number you pay.

Aluminum Fence Installation Cost Breakdown (2026)

Here’s how the money breaks down for a typical San Francisco property. Line items are per the scope noted; your final figure depends on linear footage, grade, and gate count.

Line item Typical San Francisco range
Full aluminum fence installation (typical residential run) $4,720 – $11,800
Materials: aluminum panels, posts, caps & hardware $2,360 – $6,490
Labor: layout, setting posts, mounting panels $1,770 – $4,720
Per-linear-foot estimate (installed) $24 – $47 / linear ft
Single walk gate (installed) $590 – $1,420
Double drive gate (installed) $1,180 – $2,950
Old fence removal & haul-away $470 – $1,180
Concrete footing / post-set on slope or rock $710 – $2,360

What pushes a quote toward the top of the $4,720 – $11,800 band? Length is the obvious driver, but in San Francisco it’s rarely the biggest one. Slope, soil, and access do more to move the price than footage does. A 120-foot run across a level Sunset District backyard can land near the low end. That same 120 feet climbing a Bernal Heights grade, with hand-dug footings and materials carried up a narrow stair, will land near the top. Custom ornamental or speared-top panels, decorative finials, and powder-coat color matching also add cost over a standard rackable panel.

Aluminum sits in the middle of the residential fence market. It costs less than ornamental wrought iron and more than a basic chain link. Compared to a wood run, you’re paying for a finish that won’t rot through a foggy winter. If you’re weighing material options, our guide to fence installation in San Francisco breaks down aluminum against vinyl and wood side by side. For a straight vinyl comparison, see vinyl fence installation cost in San Francisco.

What Affects Aluminum Fence Installation Pricing in San Francisco

  • Grade and slope. San Francisco lots are rarely flat. A fence line that drops or rises uses rackable panels that follow the contour, and steep sections may need stepped panels or custom-cut posts. Slope work is where the footing line item gets real, especially on the Twin Peaks and Diamond Heights sides.
  • Soil and hidden obstructions. Much of the city sits on sandy dune soil out west and clay-heavy fill in the older neighborhoods. Sandy soil near Ocean Beach can require deeper or wider footings to hold a post against wind. Rock or buried old footings mean extra digging time.
  • Salt air and coastal exposure. Properties within a few blocks of the ocean take more abuse. A powder-coated aluminum fence holds up well to salt fog compared to steel, but coastal installs benefit from heavier coating and stainless hardware, which adds a modest amount to materials.
  • Access and right-of-way. Narrow driveways, shared side yards, and stair-only access slow a crew down. In dense neighborhoods like North Beach and the Mission, staging space and permit-parking realities affect labor time.
  • Height and permit triggers. Fences over 6 feet generally need a building permit in San Francisco, and front-yard fences in many residential zones cap lower and have setback rules. A permit adds cost and lead time. Height and placement rules are worth checking before you finalize a design.
  • Gate count and hardware. Every gate adds a framed opening, hinges, a latch, and often a self-closing mechanism. A double drive gate costs meaningfully more than a walk gate because of the wider frame and heavier posts.

One worth knowing: aluminum fences are lighter than wrought iron, so they don’t demand the same heavy masonry piers. On many San Francisco lots that keeps the post-and-footing scope in check. We install to spec and back the workmanship with our 730-Day Done Right Promise, so a post that shifts or a gate that sags gets handled.

How to Save on Aluminum Fence Installation

A few practical moves lower the bill without cutting corners.

  • Combine the fence with other yard work. If a patio, driveway, or paver project is already happening, bundling it keeps one crew on site and can shave setup and mobilization costs. Our paver patio installation in San Francisco and paver driveway cost guide cover those projects.
  • Choose standard panels over custom ornamental. Standard rackable aluminum panels with a clean powder-coat finish deliver the same durability at the low end of the range. Save the speared tops and finials for the front elevation if you want the look.
  • Right-size the height. Going to 6 feet where the lot and code allow is often the smart buy, but pushing past that triggers permits and taller posts. Match the height to what you actually need.
  • Keep gates to what you’ll use. Two well-placed gates usually serve a yard fine. Each extra gate is a framed opening with hardware.
  • Get an upfront written estimate. A clear scope means no surprise add-ons mid-job. We offer free estimates and 0% financing for 18 months, plus $1,000 off projects over $10,000 – call (866) 320-2646 and a live person picks up.

FAQs – Aluminum Fence Installation Cost

Is it cheaper to repair or replace an aluminum fence in San Francisco?

Repair usually wins when the damage is isolated: a bent panel, a single loose post, or a failed gate hinge often runs well under $1,000, while a full replace lands in the $4,720 – $11,800 range. Replace makes more sense when the frame is corroded, multiple posts have shifted on a slope, or the run no longer matches your layout. Call us at (866) 320-2646 for a free assessment – we’ll tell you straight which option costs less over the next decade.

How much does a 100-foot aluminum fence cost in San Francisco?

A 100-foot residential aluminum fence installed in San Francisco typically runs about $2,400 to $4,700 at $24 – $47 per linear foot, before gates and old-fence removal. Add gates and haul-away and a realistic project total lands inside the $4,720 – $11,800 full-installation range. Call (866) 320-2646 for an exact quote on your footage – estimates are free.

Can you install my fence this week?

In many cases, yes. Standard aluminum installs on straightforward lots can often be scheduled within the same week once the scope and materials are set. Custom ornamental panels, steep-slope work, or a required permit will extend the timeline. Call (866) 320-2646 and a live person helps you find the earliest available date.

Do I need a permit for an aluminum fence in San Francisco?

Fences over 6 feet generally require a building permit in San Francisco, and front-yard fences in many residential zones have lower height limits and setback rules. Corner lots and properties in historic districts can carry extra review. Budget time and a permit fee into the project if your design trips these thresholds. We’ll flag what applies to your address during the estimate – call (866) 320-2646.

How long does aluminum fence installation take?

Most residential aluminum fence installs are completed in a single visit, often one to two days for a typical 100- to 150-foot run. Slope work, rocky footing conditions, and large gate assemblies add time. Because your crew arrives background-checked and in uniform, the day runs predictably from layout to final walkthrough. For a scheduled date, call (866) 320-2646.

Will an aluminum fence hold up to San Francisco fog and salt air?

Yes, and that’s a large part of why it’s a smart choice here. Powder-coated aluminum resists rust far better than steel in the coastal fog belt, and it won’t rot like wood through a wet winter. Coastal properties within a few blocks of the ocean do best with heavier coating and stainless hardware. The finish and workmanship are backed by our 730-Day Done Right Promise, so if something isn’t right, we make it right.

If you’re still deciding between materials, our San Francisco fence installation overview and the vinyl fence cost guide are good next reads. Thinking about your whole exterior? Browse our window replacement cost in San Francisco and roof replacement cost in San Francisco guides, or see how our kitchen remodeling in San Francisco and bathroom remodeling cost pages break down budgets. You can explore everything we do across our San Francisco service area and get an overview on our home page.

When you’re ready to price your aluminum fence, call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate. A live person answers 24/7, pricing is upfront with no surprises, and every project is covered by our 730-Day Done Right Promise. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and back the work in writing.

Pricing reflects the San Francisco market as of 2026. Groundwork Construction Co. of San Francisco offers free estimates – call (866) 320-2646.

What Our Customers Say

★★★★★ 5.0 from 5+ reviews

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

- Marco Castillo

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

- Angela Wong

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan
Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646

Request a Free Estimate

Tell us what's going on in San Francisco. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch