Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Costs to Hire a General Contractor in San Francisco (And Why the GC Rate Is the Smallest Line on the Bill)
Hiring a general contractor in San Francisco usually runs 15-25% of total project cost for overhead and profit, so a $150,000 remodel carries $22,500-$37,500 in GC margin alone. But that’s the predictable part. The number most national cost guides leave out is the $15,000-$40,000 San Francisco homeowners routinely spend on permitting fees, soils reports, and design review before a GC touches the site. Call (866) 320-2646 and we’ll walk you through the full stack in plain terms.
Key Takeaways
- GC overhead and profit in San Francisco: typically 15-25% of hard construction cost
- Pre-construction soft costs (DBI permits, Planning review, geotech, design): $15,000-$40,000 on many projects
- Neighborhood design review can add 12-18 months before demolition day
- A bid without a structural contingency line in San Francisco is planning to bill you later
The Real San Francisco Cost Stack, Line by Line
Here’s what actually gets spent before anyone swings a hammer. The Department of Building Inspection permit fees and Planning Department review fees are set by valuation and scope, not by your contractor, and they land on the front end of the project. Hillside lots on the west side often need a geotechnical report and soils investigation before a foundation plan can even be stamped. Then neighborhood design review, where it applies, can stretch 12-18 months on its own.
Stack that against a textbook GC rate and the picture changes. The percentage you negotiate with a general contractor is a fraction of what San Francisco construction actually costs to get off the ground.
| Cost Component | Typical San Francisco Range |
|---|---|
| GC overhead & profit | 15-25% of hard cost |
| DBI permit fees (scope-dependent) | $3,000-$18,000 |
| Planning Department review | $2,000-$12,000 |
| Geotechnical / soils report (hillside lots) | $4,000-$15,000 |
| Design & plan set | $6,000-$25,000 |
| Structural contingency (older stock) | 10-20% of hard cost |
None of those figures show up in a national remodeling cost calculator. They’re the reason a San Francisco kitchen quote and the same kitchen in a newer market can diverge by tens of thousands before you compare a single cabinet line.
Victorian and Edwardian Framing: Where the Contingency Goes
The city’s dense mix of 1880s-1920s Victorian and Edwardian wood-frame row houses with brick foundations means demo day is where surprises surface. Lathe-and-plaster walls hide behind drywall someone added in the 1970s. Joist spacing is often non-standard, which throws off any plan drawn to modern dimensions. And knob-and-tube wiring is common enough in pre-war stock that we plan for it.
None of that is rare. It’s normal San Francisco. A general contractor who prices these projects without building in a real contingency is either guessing or planning to come back with a change order after the walls open. The local tip worth repeating: always ask whether the bid includes permit expediting fees and a contingency line for structural unknowns. If it doesn’t, you’ll pay for both eventually, just without a schedule to plan around.
Marine fog, persistent damp, and salt air from the Pacific and Bay accelerate rot and corrosion on exposed timber and metal, particularly on the west-side hills. Contractors here learn to spec stainless hardware and galvanized flashing even on small jobs, because standard fasteners fail faster than they do inland. That detail belongs in the bid, not in a conversation after the fact.
Low-Bid GC vs. Full-Scope GC: Total Cost of Ownership
The cheapest bid and the cheapest project are rarely the same thing. A low-bid general contractor often leaves out warranty coverage, runs unlicensed subs to shave labor, and prices permits optimistically. Six months after the punch list, you’re absorbing repairs nobody’s on the hook for. The day-one number looks great. The three-year number doesn’t.
Groundwork Construction Co. of San Francisco takes a different position: upfront pricing, the number on the contract is the number you pay, and every project backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it changes what a project actually costs over its life.
Financing helps too. We offer 0% financing for 18 months and $1,000 off projects over $10,000, so the difference between a real bid and a low bid isn’t a cash-flow problem. For a kitchen, our home remodeling services run $16,520-$53,100; a bathroom sits at $10,620-$33,040. Those ranges are honest because they include the soft costs we just walked through.
Live person, 24/7. No voicemail, no waiting until Monday. Background-checked, uniformed technicians on every project. Our technicians bring up to 12 years of experience, and we work with brands like Kohler and Moen on fixtures, plus KraftMaid cabinetry where the plan calls for it.
What to Ask Before You Sign a GC Contract in San Francisco
- Does the bid itemize permit fees and design review costs, or lump them?
- Is there a stated contingency line, and how is it released if unused?
- Are all subs licensed and insured, with proof on file?
- What’s the workmanship warranty period in writing?
- Does the schedule account for DBI and Planning review timing?
Good answers to those five questions tell you more than a dozen references ever could.
FAQs
Most San Francisco general contractors charge 15-25% of total project cost for overhead and profit, so a $150,000 remodel carries $22,500-$37,500 in GC margin. Layer on permits, soils reports, and design review ($15,000-$40,000 combined is common) and you have the real number. Call (866) 320-2646 for a free estimate with every line itemized.
The permitting gauntlet is the main driver. DBI and Planning Department fees, hillside soils reports, and 12-18 months of neighborhood design review drive soft costs that don’t exist in newer markets. Century-old Victorian framing adds structural contingency on top. Call (866) 320-2646 and we’ll walk you through what applies to your specific project.
It depends on what the walls reveal. For lathe-and-plaster walls with knob-and-tube wiring and brick foundations, targeted remodeling usually beats a full gut – but only after a real inspection. We build a structural contingency into every San Francisco bid so you’re not choosing between repair and remodel on a guess. Call (866) 320-2646 to schedule an estimate.
Yes. Every Groundwork project carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s 730 days of coverage, one of the longest workmanship guarantees in residential construction. Call (866) 320-2646 to see how it applies to your San Francisco scope.
Get a San Francisco Estimate With No Surprises
Hiring a general contractor in San Francisco is a big decision, and the cost stack is real. Get a bid that itemizes permits, contingency, and GC margin, and you can plan a project instead of guessing at one. Call (866) 320-2646 today for a free estimate and design consult. Upfront pricing, the 730-Day Done Right Promise, and $1,000 off projects over $10,000. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan