Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Does a General Contractor Do in San Francisco, CA?
A general contractor in San Francisco plans, permits, budgets and runs a construction project from first drawing to final inspection, hiring and sequencing the trades while keeping one accountable name on the job. Here that role widens: you’re also a permit navigator through DBI and the Planning Department, a structural risk manager for century-old wood-frame buildings, and, at times, the person who answers a neighbor’s concerns at a design review hearing. Want to talk through a project? Call Groundwork Construction Co. of San Francisco at (866) 320-2646.
The SF GC’s Job Goes Farther Than Scheduling Trades
In most cities, coordinating subcontractors and holding the schedule is the whole job. In San Francisco, the approvals come first and they can take longer than the build. A rear addition that triggers discretionary review can sit in front of a Planning Commission for a year or more before a shovel hits dirt. A qualified GC here reads the plans for those triggers early, because a project that needs a conditional use permit is a different project than one that clears ministerially.
That means knowing the difference between a ministerial permit (over-the-counter, staff approves it) and a discretionary one (noticed, potentially appealed, potentially heard in public). And it means knowing when a neighbor’s rear-yard complaint becomes a formal objection. We’ve watched a Bernal Heights addition turn into a hearing about shadow impact on a neighboring garden – a real planning concern, handled by a GC who understood the process and could speak to the light study. Training in general construction management doesn’t teach you that. Only time in this jurisdiction does.
Our own crews are experienced, and our technicians bring up to 12 years on the tools. The permitting fluency is the part you can’t shortcut.
Reading Old Buildings Before They Read You
San Francisco’s housing stock is a dense mix of 1880s-1920s Victorian and Edwardian wood-frame row houses on brick foundations, with 1950s-70s stucco-over-wood infill and modern towers downtown. In that stock, hidden structural problems turn into change orders, and change orders turn into budget fights. A GC’s pre-construction review is where you catch them.
During walk-through and drawing review, we’re looking for specific conditions:
- Soft-story. Ground-floor garages and storefronts in older multifamily buildings, where the seismic retrofit mandate applies, are the first thing we check.
- Undersized headers. A previous remodel that cut a bearing wall without engineering shows up as a sag or a crack pattern, not a label.
- Compromised foundations. Brick footings on hillside lots, plus decades of damp, are where underpinning decisions get made.
- Hillside staging. Steep lots change how material moves and how crews work safely – a slope that looks manageable on paper rarely is.
Finding these in review is cheaper than finding them mid-frame. That’s why the pre-construction phase is not paperwork; it’s the phase that protects the budget.
Marine Air Changes What Gets Specified
Fog, persistent damp and salt air off the Pacific and Bay do real damage to exposed timber and metal, and the west-side hills get the worst of it. Standard fasteners and standard paint have a shorter life here than the manufacturer’s literature assumes. On fog-belt exposures, we spec stainless hardware and galvanized flashing even on small jobs, plus closed-cell insulation where a wall will sit in damp air. Marine-rated coatings go on exposed metal because the alternative is repainting in a fraction of the normal cycle.
Inside the house, the same thinking applies to finishes. A kitchen or bath that sees constant humidity needs materials chosen for it, not just what’s on the standard display. We work with Kohler, Moen, Delta and Blanco on fixtures because those lines hold up, and the specification is written for the house and the exposure, not pulled off a catalogue page.
What a GC Actually Manages, Phase by Phase
The day-to-day is easier to picture as a sequence:
- Pre-construction. Scope, feasibility, structural risk review, drawing coordination, material specification.
- Permitting. DBI submission, Planning review, neighborhood notification, any discretionary process.
- Trade coordination. Hiring and sequencing licensed subs, scheduling inspections, managing the site.
- Build and inspections. Rough-in to finals, with moisture and weather detailing managed throughout.
- Closeout. Walkthrough, punch list, warranty handover.
Pricing for the kinds of projects a GC manages here, based on our San Francisco market ranges:
| Project | Typical range |
|---|---|
| Kitchen remodel | $16,520-$53,100 |
| Small kitchen remodel | $10,620-$23,600 |
| Bathroom remodel | $10,620-$33,040 |
| Roof replacement | $9,440-$23,600 |
| Window replacement | $5,310-$17,700 |
| Home addition | $53,100-$153,400 |
| ADU construction | $106,200-$259,600 |
See our full scope of services for the trade-by-trade picture.
Licensing Protects the Homeowner, Not Just the Contractor
A licensed GC in San Francisco carries General Liability and Workers’ Comp. That matters most when something goes wrong: a worker injured on a steep hillside site. Without those policies, the homeowner can be exposed to liability that runs past the cost of the whole project. Fall hazards are a genuine concern on tight hillside lots, and staging on the slope is a planning decision, not an afterthought. It’s a reason to ask for proof of coverage before signing, not after.
Accountability Doesn’t End at Certificate of Occupancy
The job isn’t finished when DBI signs off. Groundwork backs every project with our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s a two-year workmanship guarantee, one of the longest in residential construction, and it covers the callbacks a permit inspection never checks. Crews are background-checked and arrive in uniform on every job, and the phone picks up 24/7 with a live person, so a leak or a failed detail doesn’t wait until Monday morning.
Pricing is upfront. You get three standing offers we don’t dress up: $1,000 off projects over $10,000, a free project estimate and design consult, and 0% financing for 18 months. The number you see is the number you pay, short of a change order you approve in writing.
For broader context on what each trade covers – kitchen remodeling, bathroom remodeling, roofing, windows and doors, fence installation, driveway and pavers, and home additions and ADUs – start there, then call for a site-specific answer.
FAQs
Your architect designs the building; the general contractor runs the build, the permits and the trades. In San Francisco that means the GC owns DBI submissions, Planning Department triggers, sub scheduling, inspections and the workmanship guarantee after completion. The design intent comes from the architect. The accountability for executing it is ours.
Because this city’s approval process has layers most places don’t: DBI plan check, Planning Department review, neighborhood notification, and sometimes discretionary review that runs a year or more. Hillside lots, tight setbacks and historic stock add to it. A GC who knows which layers apply to your project keeps it out of the long tail where possible. Call (866) 320-2646 and we’ll walk through what your project likely needs.
Usually repair and reinforcement, when the problems are caught early. A soft-story retrofit or an undersized header correction is a defined scope with a defined cost. Replace typically wins only when the foundation is compromised across most of the footprint. The decision gets made at pre-construction review, not on site after demolition. A free consult is the way to get a real answer.
For most work that requires a permit, yes – and you want one for the liability protection. Workers’ Comp and General Liability are the homeowner’s shield if someone is injured on a steep lot. An unlicensed GC leaves that exposure with you. Call (866) 320-2646 for an estimate and we’ll confirm what your project needs.
Talk to a GC Who Knows This City
Whether you’re planning a hillside addition, a soft-story retrofit or a kitchen that needs to survive the fog, the right conversation starts with clear answers. Groundwork Construction Co. of San Francisco offers a free, no-pressure estimate and design consult – call (866) 320-2646 whenever it suits you, and a real person picks up.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco, CA.