Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterADU Design & Permitting in San Francisco, CA
ADU design and permitting in San Francisco is the front half of an accessory dwelling unit project: turning a garage, basement, or backyard into a legal, buildable second home and navigating the city’s planning and building review to get the stamped approvals you need. Most San Francisco ADU projects take 6 to 12 months from first sketch to permit issuance, and the design decisions you make in the first 60 days determine whether that timeline holds or slips. Groundwork Construction Co. of San Francisco handles this stage end to end, so the drawings you submit are the drawings we build from, with no handoff gaps between designer, expediters, and the crew. Call us at (866) 320-2646 to start with a free estimate and design consult.
Where this fits: an ADU is one part of the broader Home Additions & ADU work we do across San Francisco, and the permitting stage is what makes the rest of the project legally buildable. If you’re still deciding between an addition and a detached unit, that conversation happens before design starts.
Key Takeaways
- San Francisco ADU permits run through the Planning Department, DBI, and often the Historic Preservation Commission or a neighborhood design review board, so approval paths vary block to block.
- Design costs typically run $8,000 to $25,000 for a San Francisco ADU, and permit fees commonly land between $6,000 and $18,000 depending on scope and whether a new sewer lateral or foundation is involved.
- The city’s ADU rules changed significantly in recent years (local rules plus state law now allow larger detached units in many zones), which is why local permit knowledge matters more than generic ADU guides.
- Most of our San Francisco ADU projects reach permit issuance in 4 to 8 months when drawings are complete and site conditions are documented clearly.
- All of it is backed by our 730-Day Done Right Promise, and our technicians have up to 12 years of experience on this kind of work.
When You Need ADU Design & Permitting
Not every homeowner knows when to call a designer versus a permit expediter versus a builder. In San Francisco the right time to bring in a firm that does all three is earlier than most people think. Here are the situations where we get called in most often.
- You want to convert a garage into a livable unit. San Francisco has tens of thousands of ground-floor garages in Sunset, Richmond, Bernal Heights, and Noe Valley homes, and many can be converted. The catch: garage conversions trigger fire separation, egress, ceiling height, and parking-replacement questions that the city reviews closely, and a design that ignores those details comes back rejected.
- You’re adding a detached unit in the backyard. Lots in the Outer Sunset, Excelsior, and Portola are long and narrow, and a detached ADU often fits where nothing else will. Detached units bring their own set of rules: rear yard coverage, rear yard setback, and a new sewer lateral and utility trench that the drawings must show.
- You have a two-unit building and want to add a third. Under current state and local rules, many San Francisco lots zoned for two units can add a third, and this is a permitting path with its own checklist. The design has to satisfy both the planning side (unit count, density) and building side (structural, egress, fire separation between units).
- Your last permit was rejected or stalled. If a previous designer submitted drawings that came back with corrections and nothing moved since, we regularly take over those files. We review the correction letters, fix the drawings, and resubmit. The most common problems we see: incomplete site surveys, missing structural calcs, and egress plans that don’t meet code.
- You’re not sure what your lot allows. This is where we get the most calls. Before you spend money on design, we look at zoning, lot dimensions, existing coverage, and any known historic or neighborhood-specific overlays so you know what’s realistically buildable. In San Francisco the answer isn’t the same in Noe Valley as it is in the Bayview, and it can change block by block.
- You want the unit rentable or financeable. Lenders and appraisers treat a legal, permitted ADU differently from an unpermitted one, and San Francisco renters expect a legal unit. Design and permitting for a rentable unit means meeting all the finish, life-safety, and accessibility minimums the city will inspect against, not just the shell.
If you recognize your situation in any of these, the call to (866) 320-2646 gets you a real answer from a live person 24/7, not a voicemail and a callback three days later.
Our ADU Design & Permitting Process
We run ADU permitting as a single sequence, from site review through stamped approval. Design decisions, structural review, and permit submittals move together, so nothing gets drawn twice and nothing gets redrawn because one party didn’t talk to another. Most of these steps happen in parallel where the city allows it.
- Site review and zoning check. We pull the parcel’s zoning, look at lot coverage, rear yard, building height, and any historic or neighborhood-specific overlays that affect the lot. This is where we confirm what’s actually allowed before anyone draws a wall. We’re candid about the answer, even when it means the project needs to change shape.
- Feasibility sketch and budget envelope. You get a simple sketch of what fits plus a line-item budget for what it will cost to build. The two come together because an ADU design that pencils out on paper but blows the budget in construction is worse than no design. This is also where we look at finishes (James Hardie siding for durability on foggy west-side blocks, for example) so the design reflects real material choices.
- Full design set. Our designers and structural team produce the complete architectural and structural drawings: floor plans, elevations, sections, framing, foundation, egress, and energy compliance. If the unit includes a kitchenette or bath, finish drawings specify the fixtures and cabinetry so the permit set and the build set match (KraftMaid and Cambria are two of the brands we specify most often). All of this is built to be approved, not just submitted.
- Planning and DBI submittals. We file with the San Francisco Planning Department and Department of Building Inspection, and handle any additional review the lot triggers (Historic Preservation Commission, neighborhood design review, or fire review, depending on the site). We respond to correction letters and resubmit until the plan is approved.
- Pre-construction coordination. Once the permit is issued, you get a construction schedule, a fixed written scope, and a named crew lead. The handoff from design to build is internal, so you’re not repeating your project story to a new party at this stage.
- Build and closeout. Construction runs to the approved plans, with inspections scheduled as the work progresses. At the end, you have a stamped, signed-off ADU that is legally a second unit. The whole project is covered by the 730-Day Done Right Promise.
We come into the design stage with build knowledge, which changes what we draw. Ceiling heights that meet code, egress windows that fit a real window schedule, and a foundation that suits the actual soil conditions on Bernal Heights or in the Sunset are all things we design around from the start. That’s how the drawings stay approval-ready and buildable at the same time.
ADU Design & Permitting Pricing in San Francisco
San Francisco ADU design and permitting typically costs $14,000 to $43,000 combined, and the total depends on the type of unit, how much site review the lot triggers, and whether engineering (structural, geotechnical) is part of the set. Most homeowners we work with land in that range. Here’s how the numbers break out.
Line-Item Pricing (San Francisco, 2025-2026 market)
| Item | Typical Range | What Affects the Number |
|---|---|---|
| Feasibility and zoning review | $0 to $1,500 | Included free in most of our estimates; a standalone review may be charged if you need it before committing |
| Architectural design (full permit set) | $8,000 to $18,000 | Unit type, square footage, whether the unit is attached, detached, or a garage conversion |
| Structural engineering | $3,000 to $8,000 | Foundation type, hillside lots, additions to existing structures, shear-wall upgrades |
| Geotechnical report (when required) | $2,500 to $6,000 | Hillside lots, liquefaction zones, or any project that adds significant foundation load |
| Energy (Title 24) compliance | $800 to $2,000 | Envelope, glazing, HVAC, and whether the unit shares systems with the primary home |
| Planning fees | $1,500 to $6,000 | Unit size, zoning, whether an environmental review or discretionary review is triggered |
| DBI building permit fees | $4,000 to $12,000 | Valuation-based; detached and larger units land at the higher end |
| Expediter and permit run | $1,500 to $4,500 | Complexity of submittal, correction letters, number of counter visits |
What Affects the Real Cost
A few San Francisco-specific factors push the range up or down more than anything else:
- Lot type and slope. Flat-lot garage conversions in the Sunset or Richmond usually land at the lower end. Hillside lots in Bernal Heights, Noe Valley, or Diamond Heights often require geotech and additional structural work, and the design fees go up accordingly.
- Historic or neighborhood overlay. If the property is in a historic district, has a neighborhood design review requirement, or sits in a conservation district, expect additional review time and sometimes additional design coordination.
- New vs. existing construction. Converting existing space (garage, ground floor) is usually cheaper to permit than building a fully detached unit with its own utility trench, sewer lateral, and foundation.
- Number of deferred decisions. The fastest, cheapest path is a design set that’s complete at first submission. Correction letters and resubmittals add cost and months.
- Scope of the build side. A design and permit package for a simple studio is not the same as one for a two-bedroom unit with full kitchen and bath. The finish level, cabinetry, and fixtures specified in the design all show up in the build budget.
Our Offers on ADU Design and Build
Every ADU design and permitting project starts with a free project estimate and design consult. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months, which most homeowners use to bridge the gap between design fees and build costs. Upfront pricing means the number we quote on the design set is the number you see in the build contract. No surprises when construction starts.
The full project typically involves finishes, cabinetry, and siding from vetted brands, and that matters to your budget. If you’re comparing build bids from other firms, ask which brands they’re specifying. The difference between builder-grade and James Hardie or KraftMaid often shows up in the first 5 years, not the first 5 weeks. Worth noting on the build side, too: you can see how we approach additions and ADU finishes at our Home Additions & ADU page.
Repair vs. Rebuild: Is It Cheaper to Redesign or Start Over?
If you have a stalled or rejected permit, it’s almost always cheaper to fix the existing design than start over, as long as the underlying layout is workable. We review the rejected set, identify what the city actually flagged (planning vs. building vs. both), and fix the drawings. Starting completely fresh usually only makes sense when the original design missed a fundamental site or zoning constraint, which the site review will catch. Call (866) 320-2646 and we can tell you within a short conversation which path is more economical.
FAQs – ADU Design & Permitting
How long does it take to get an ADU permit in San Francisco?
San Francisco ADU permits typically take 6 to 12 months from first sketch to permit issuance. Planning review and DBI review run on separate timelines and can move in parallel when the submittal allows. The biggest variable is whether the design set is complete at first filing; incomplete sets come back with correction letters and add 2 to 4 months. Historic or neighborhood-review projects sit at the longer end. Call (866) 320-2646 for an estimate on your specific lot, and we’ll be direct about which timeline applies to you.
What does ADU design and permitting cost in San Francisco?
Design and permitting combined typically cost $14,000 to $43,000, depending on unit type and how much site-specific engineering is needed. A garage conversion on a flat lot in the Sunset usually lands at the lower end. A detached unit on a hillside in Bernal Heights lands at the upper end. Estimating is free, and we can put a real number on your project within one conversation. Call (866) 320-2646 for an exact quote.
Do I need an architect and a permit expediter, or does one firm handle both?
One firm can handle both design and expediting, and in most San Francisco ADU projects it’s the more economical path. Splitting design from expediting creates handoff gaps that show up as correction letters and resubmittals. We run both in one sequence, and the people who draw the plans are the same people who file and follow up on them. Call (866) 320-2646 to see whether your lot qualifies for the simpler process.
Can you convert my garage to an ADU, or does it have to be detached?
Garage conversions are the most common ADU type in San Francisco, and most are permitted as long as the design meets fire separation, egress, ceiling height, and ventilation requirements. Detached units, additions, and two-to-three-unit conversions are all valid paths too. Which one fits your lot comes down to zoning and existing coverage. Call (866) 320-2646 and we’ll tell you which path makes the most sense for your property.
The Old Rules Still Apply, Right? Don’t I Need a Full Design Set for Everything?
San Francisco’s current ADU rules, combined with state law, allow more size and more flexibility than the rules most homeowners remember from a few years ago. That cuts both ways: what’s allowed may be larger than you think, but the paperwork and review process still expect a complete package. The safest path is to find out what your lot allows before you design anything, which is exactly what our free design consult does.
What happens if my existing permit is stalled with corrections?
We take over stalled permits regularly. The first step is reading the correction letters carefully; many stalled files are stalled on 2 or 3 specific items, not the whole design. We fix those drawings, coordinate with the original engineer or designer where needed, and resubmit. Call (866) 320-2646 and we can review your file this week.
Why Homeowners Choose Groundwork for ADU Design and Permitting in San Francisco
Three things separate this work from a design-only firm or a permit expediter working alone:
- Design that’s built to be approved and built. Our drawings reflect real construction knowledge, which is why they’re less likely to trigger correction letters and easier to build from once approved. Our technicians have up to 12 years of experience across additions, ADU conversions, and full construction.
- One sequence, not three handoffs. Site review, design, engineering, permitting, and build all run inside Groundwork, so you have one point of contact from feasibility sketch to certificate of occupancy.
- Accountability in writing. Every project is covered by the 730-Day Done Right Promise, and the technicians who show up on site are background-checked and arrive in uniform. Calls are answered by a live person 24/7.
If you’re also looking at a project that touches the rest of the house (replacing a leaking roof before you start an ADU, or upgrading windows on the primary structure, for example), our other service lines can handle those pieces too, and they’re covered by the same guarantee.
Start with a Free Design Consult and a Real Estimate
The best starting point for any San Francisco ADU project is a site review and a frank conversation about what your lot allows. That consult is free, and it tells you whether the project you’ve been thinking about is realistic, what it will cost to design and permit, and how long the city will likely take. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and design consult. A live person will answer, day or night. Upfront pricing, no surprises, and the 730-Day Done Right Promise standing behind every line item.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.