Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Design & Permitting in San Francisco: What It Takes and What It Costs
ADU Design & Permitting in San Francisco typically runs $53,100 to $153,400 for the design and entitlement phase of a permitted unit, and the single biggest variable is how much discretionary review your address triggers. Expect 4 to 6 months for a straightforward interior or garage-based unit in a zoning-clear neighborhood, and 12 to 18 months on a hillside lot or a historic-district block where Planning wants design review before you touch a shovel. We build the permit timeline into the contract from day one. Call (866) 320-2646 and we’ll walk your parcel through the process before you sign anything.
How we take an ADU from first walkthrough to issued permit
Permitting is where most San Francisco ADU projects stall, so we treat design and entitlement as their own job, not a footnote on the construction bid. Here’s the sequence we work, with the decision points that fall on you.
Stage 1: Site and zoning check (Days 1 – 10)
We start with a parcel lookup and a physical walkthrough: setbacks, rear-yard depth, existing foundation, and how your building sits on the slope. You decide here whether the unit goes in the existing envelope or requires new footprint. On a steep lot that single choice can swing the structural scope by tens of thousands.
Stage 2: Schematic design (Weeks 2 – 6)
We produce two or three layout options sized to what your zoning actually allows, not what a generic floor-plan site promises. You pick one and lock the room count, bathroom location, and kitchenette. This is also where you choose whether the unit gets a full kitchen or a kitchenette, which affects both cost and the electrical load calculation.
Stage 3: Permit drawings and structural (Weeks 6 – 14)
Architectural and structural sheets get assembled for Planning and DBI, with the seismic and foundation details your build era demands. You review and approve before submittal. Any survey or title work needed gets ordered here.
Stage 4: Submittal and planning review (Weeks 14 – 40, often longer)
We file, respond to plan-check comments, and shepherd the project through design review if your block requires it. You’ll be asked to attend or authorize design-review appearances. This is the stage that eats months on a discretionary project, and it’s why we don’t quote a construction start date until the permit is in hand.
Stage 5: Permit issuance and construction handoff (Weeks 40 – 70)
Once the permit is issued, drawings and specs pass to the build crew with a fixed scope and a written line-item price. You approve the final budget before demolition begins. Every stage above is covered by our 730-Day Done Right Promise once work starts, and the design decisions are documented so nothing gets renegotiated mid-construction.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the cost variance in a San Francisco ADU comes down to a handful of design and spec decisions. Here’s what actually gets picked, and the honest trade-off on each.
- Full kitchen vs. kitchenette: A full kitchen adds appliances, more circuits, and plumbing, pushing the high end. A kitchenette suits a rental or family unit and saves real money, but limits resale appeal to some buyers.
- Type of construction: Wood-frame is the default and the most cost-effective on most lots. Structural steel or a concrete podium on a hillside or over a soft-story garage raises both engineering and foundation cost considerably.
- Foundation approach: Underpinning an existing brick or hillside foundation is a specialized job with its own permit scope. New isolated footings are simpler on flatter lots. This decision follows the site, not the budget.
- Windows and doors: Standard replacement-grade units are fine in interior locations. On the exposed west-side hills we spec higher-performance glazing and hardware that stands up to the salt air; it costs more up front and lasts far longer.
- Exterior cladding: James Hardie fiber-cement and similar products hold paint well in damp coastal conditions. Budget wood siding needs more maintenance in the fog belt.
- Fixtures and finishes: Grohe and Sterling fixtures sit at the reliable end of the range; the trade-off is a modest premium for hardware that survives salt and humidity without corroding.
What ADU Design & Permitting costs in San Francisco, CA
Design and permitting for an ADU in San Francisco falls in the $53,100 to $153,400 range. That covers architectural and structural drawings, planning submittal, plan-check responses, and permit fees. It does not cover construction; full ADU Construction runs $106,200 to $259,600 separately. Five variables push a project toward one end or the other:
- Site and slope: A flat lot with a clean rear yard sits near the low end. A steep hillside with underpinning and retaining work lands at the high end.
- Discretionary review: By-right projects move fast and cheap. Design review, historic-district review, or neighbor appeals add months and fees.
- Existing condition: Pre-1906 wood-frame with a brick foundation means more engineering, a survey, and structural detailing than a 1970s building.
- Design complexity: A simple rectangular plan draws faster and cheaper than a custom layout with structural gymnastics.
- Permit scope: Adding a new footprint or utilities trigger more departments than an interior conversion.
Every written estimate is itemized line by line, and the number you see is the number you pay. No-hassle upfront pricing means no change orders for design work we should have scoped correctly the first time. Call (866) 320-2646 for a free estimate on your parcel.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco homes specifically do to this job
San Francisco ADU work is shaped by two things you won’t find in most cities: hills, and a very old housing stock. Building on and beside steep hills in one of the densest historic cores in the country means nearly every ADU project involves tight lots, hillside foundations, and a planning gauntlet that can run a year or more before a shovel hits dirt. The pre-1906 gold-rush-era and post-1906 rebuild stock, plus soft-story seismic retrofit mandates and neighborhood design review, make permitting here unlike anywhere else in the Bay Area.
The buildings themselves drive the engineering. We work most often on Victorian and Edwardian wood-frame row houses with brick foundations, and the foundation and seismic detailing on those units is a real part of the design scope. West-side blocks in the fog belt get specified differently too: stainless hardware and galvanized flashing even on small jobs, because the Pacific fog and salt air corrode standard fasteners and paint inside a fraction of their normal lifespan. In Noe Valley and the Inner Sunset, we regularly see rear-yard sheds and old garages that look convertible until a foundation inspection shows rot. An accessible unit in the Richmond or Sunset districts typically needs a moisture-control plan from the drawings forward.
If your ADU is part of a full Home Additions & ADU in San Francisco scope, the design work folds into the larger permit set. For the wider project through our Home Additions & ADU service, we coordinate the whole envelope, and homeowners often pair the interior finish-out with Full Kitchen Remodeling in San Francisco or Cabinets & Countertops in San Francisco once the unit is framed. We handle design and permitting across San Francisco, and we also take on jobs in nearby Daly City and San Bruno.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: ADU Design & Permitting in San Francisco
Plan on 4 to 6 months for a by-right unit and 12 to 18 months where discretionary or design review applies. A hillside lot or a historic-district block is where the older end of that window shows up. Call (866) 320-2646 for a realistic timeline on your parcel.
Yes. San Francisco requires permits for any ADU, whether it’s an interior conversion or new construction, and projects also go through Planning as well as DBI. Skipping or under-scoping the permit is the fastest way to get a stop-work order. We pull permits and pass inspections as part of every job.
Often yes, particularly in a garage or existing rear space where a bathroom can tie into nearby stacks. The feasibility depends on how far the new bathroom sits from the existing drain lines and whether the floor structure can carry the load. We assess that in the first walkthrough.
It runs $53,100 to $153,400, and the biggest factors are site slope, discretionary review, and the condition of the existing foundation. A flat-lot interior unit sits near the bottom; a hillside new-footprint project lands near the top. Call (866) 320-2646 for an exact quote; estimates are free.
Every project we build is backed by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and that holds for the full two years. Our technicians have up to 12 years of experience, and every job uses background-checked, uniformed technicians.
Get a free estimate for ADU Design & Permitting in San Francisco
Before you spend a dollar on drawings, get a written, line-item estimate for ADU Design & Permitting in San Francisco. We look at your parcel, assess the zoning and structural reality, and lay out the timeline and cost in plain terms. A live person answers around the clock, and we’ll tell you what to expect at every stage. Call (866) 320-2646 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co..