Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Larkspur, CA: What It Costs and How Long It Takes
Aluminum fence installation in Larkspur typically runs $4,000 – $10,000 for a standard residential run, with most jobs finished in 3 – 7 working days once material is on site and any permit is in hand. You’re buying a powder-coated, rust-proof barrier that suits Larkspur’s wet winters and wildfire-conscious lots far better than wood over the long haul. Call (866) 320-2646 for a free on-site estimate and a written line-item quote before anything gets ordered.
How We Run an Aluminum Fence Project in Larkspur, Start to Finish
Aluminum fences aren’t complicated, but the sequence matters, and the decisions you make early lock in cost and lead time. Here’s the real order of operations.
Stage 1: Site walk and layout (day 1, about 90 minutes)
We walk the property line with you, confirm where the fence actually needs to sit, and mark posts. This is where you decide height (4 ft, 5 ft, or 6 ft), run length, and gate placement. If the line runs near a slope, a tree, or a shared property edge, we flag it now rather than after we’ve set posts in the wrong spot.
Stage 2: Utility locate and permit check (days 1 – 5)
Before a single hole gets dug, we call for utility marking so nobody hits an irrigation line or a buried electrical feed. If your run crosses a required setback or you’re in a Design Review overlay, we confirm what the town requires. Most straightforward residential aluminum runs don’t need a building permit, but some Larkspur lots do, and we tell you which side of that line your job falls on.
Stage 3: Material order and lead time (about 2 – 4 weeks)
This is the stage homeowners underestimate. Powder-coated aluminum panels and posts are made to length, so a custom run means a factory lead time. Standard heights and colors move faster. You choose color, panel style, and post caps here, and we confirm the delivery date in writing.
Stage 4: Demo and post setting (days 1 – 2 on site)
Old fencing comes out first if there’s any to remove. Then we dig and set posts in concrete, plumb and spaced to your panel width. Concrete needs to cure before panels go on, which is why setting and hanging don’t usually happen the same day.
Stage 5: Panel hang, gate, and walkthrough (days 3 – 5)
Panels go on, gates get hung and adjusted so they swing clean, and we walk the whole run with you. Any hardware adjustment or touch-up happens before we leave. You get the 730-Day Done Right Promise in writing on the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Options You’ll Actually Choose Between
Aluminum isn’t one product. What you pick moves both the price and how the fence looks a decade from now.
- Residential vs. commercial grade. Residential panels are lighter and cost less; commercial grade uses thicker rails and heavier posts. On a long run or a windy ridge lot, the heavier gauge is worth it.
- Finish. Powder coating is the standard and holds color through Marin’s wet winters. A textured finish hides scuffs better than flat. Coastal exposure to salt air argues for the better coating.
- Panel style. Flat-top, spear-top, and decorative racked panels all cost differently, and racked panels (which follow a slope) are the right call on hillside lots where a level panel would leave a gap at the bottom.
- Height. 4 ft reads as decorative; 5 – 6 ft gives real containment for pets and privacy screening. Taller means more material and more post spacing.
- Gates. A walk gate is straightforward. A drive gate adds hardware, bracing, and cost, and needs to be engineered to swing without sagging.
What an Aluminum Fence Costs in Larkspur, CA
Most Larkspur aluminum fence jobs land between $4,000 and $10,000. The low end is a short, flat run in a standard color with no gate. The high end is a long, sloped run with racked panels, a drive gate, and old fence removal.
What pushes a job toward the high end:
- Run length and post count. Material and labor scale with linear feet, and more posts mean more digging.
- Slope and terrain. Hillside and canyon lots need racked panels and sometimes stepped posts, which takes longer.
- Removal and disposal. Tearing out an old wood or chain link fence and hauling it off adds cost.
- Gate complexity. A drive gate with proper bracing and hardware is a meaningful line item on its own.
- Access. Tight, tree-canopied lots where a truck can’t pull close mean more hand-carrying.
Your written estimate itemizes posts, panels, gates, concrete, removal, and any permit cost, so the number you see is the number you pay. No change orders after the fact. If this fence is part of a full Fence Installation in Larkspur plan that includes other sections, we scope it all together in one quote.
See the difference
Before
After
Before
After
Before
AfterWhat Larkspur Homes Specifically Do to This Job
Larkspur is a small, largely built-out Marin town where nearly every job is a remodel on an older home, not a new subdivision build, and that shapes an aluminum fence project here. The early-1900s Victorians and bungalows along Magnolia Avenue and the mid-century hillside homes up the canyons were laid out long before modern setbacks were written, so property lines are tight and the fence often has to thread between mature trees. The town’s Design Review process looks hard at exterior changes visible from the street – more so than neighbors like Corte Madera or San Anselmo – so a front-yard aluminum run may need the style and color reviewed before we order. Because Larkspur sits in the Wildland-Urban Interface, non-combustible aluminum is a genuine plus for defensible-space compliance, and wet winters mean we schedule installation around the rainy season rather than through it. If your project also touches the ground around the fence, homeowners often pair this with Patios, Walkways & Pool Decks in Larkspur or a Driveway Repair & Replacement in Larkspur so the hardscape and fence go in clean together. We cover the whole of Larkspur, including ZIPs 94939 and 94977.
Serving Larkspur, CA – Our Local Coverage Area
We serve Larkspur and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Larkspur
Plan on 3 – 7 working days on site once material arrives. The bigger variable is the factory lead time for powder-coated panels, which runs 2 – 4 weeks for a custom order. Call (866) 320-2646 and we’ll give you a realistic date before you commit.
Many straightforward residential runs don’t require a building permit, but properties in a Design Review overlay or on certain hillside lots can. We check what your specific lot requires during the site walk and build any permit cost into the written estimate.
Expect $4,000 – $10,000 for a typical residential run, with the low end for a short flat section and the high end for a long, sloped run with a drive gate. Call (866) 320-2646 for an exact quote – estimates are free.
Well. Powder-coated aluminum doesn’t rot, warp, or rust the way wood and steel do, which is why it suits Marin’s wet-winter climate and wildfire-conscious lots. The finish is the part that matters, so we spec the better coating and back the workmanship with the 730-Day Done Right Promise.
No. Your written estimate itemizes every line, and the number you see is the number you pay. If something unforeseen turns up underground during post setting, we stop and talk to you before changing anything.
Get a Free Aluminum Fence Estimate in Larkspur
Call (866) 320-2646 and a live person answers, any time, day or night. We’ll set a free on-site visit, walk your property line, and hand you a written line-item quote with the material lead time in plain terms. Estimates are free, and the 730-Day Done Right Promise covers the workmanship in writing. Project over $10,000? Ask about $1,000 off and 0% financing for 18 months.
Written by the team at Groundwork Construction Co.