Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Pacifica, CA: What It Costs and How It’s Built
An aluminum fence in Pacifica typically runs $3,500 to $9,000 for a residential yard, with most single-family jobs in the 94044 ZIP landing around $4,000 to $10,000 depending on linear footage, grade, and how much site prep the hillside demands. Most jobs wrap in two to four working days once materials are on site. Call (866) 320-2646 for a free on-site estimate, and we’ll walk the property line with you and put a written line-item number in your hands.
How an Aluminum Fence Gets Built in Pacifica, Start to Finish
Aluminum fences are lighter and faster to install than wood or masonry, but on Pacifica’s sloped and bluff-adjacent lots the prep work is where the job actually lives. Here’s the real sequence.
Stage 1: Site walk and layout (day 1, roughly 1 to 2 hours). We walk the property line with you, confirm exactly where the fence runs, and check for buried irrigation, gas lines, and low-voltage landscape wiring. On hillside lots we look hard at grade changes. This is when you decide the fence style, height, and color, and whether you’re fencing the full perimeter or just the street-facing run. Any HOA or coastal-review questions get flagged here so nothing stalls mid-build.
Stage 2: Permits and HOA sign-off (day 1 to 10, varies). A standard residential aluminum fence at or under six feet usually clears a simple over-the-counter permit. On coastal-bluff and marine-terrace lots, the project can fall under coastal development review depending on setback and location, so we confirm what your parcel actually requires before we order a single panel. You’ll know the permit scope, and the cost, before work starts. We pull the permits; we don’t ask you to.
Stage 3: Demo and prep (day 2, half to full day). Old fencing comes out, posts get set, and we establish a true line. On sloped ground we rack the panels to follow the grade rather than stair-stepping every post, which keeps the top rail clean. Footings get set in concrete and cured according to soil and slope conditions. This is the stage where a Pacifica hillside lot can add a day over a flat inland job.
Stage 4: Panel and gate installation (day 3, full day). Posts, panels, and gates go in. Racking, hardware, and the gate swing get dialed in. You decide gate placement and swing direction before this stage so we’re not re-cutting on install day.
Stage 5: Final walk and inspection (day 4, 1 hour). We walk the run with you, check every post for plumb, every gate for smooth latch, and confirm the inspection passes where a permit was pulled. Anything that needs a tweak gets handled before we call it done, all under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between for an Aluminum Fence
- Residential-grade vs. heavy-duty aluminum: Standard residential panels are fine for a backyard run; heavy-duty or commercial-grade extrusions cost more but hold up better against wind load on an exposed bluff-edge lot. If your property takes the full onshore wind off the Pacific, this is the upgrade worth making.
- Powder-coat finish and color: Black is the default and reads classic against stucco. Bronze and architectural-grade coatings hold color longer in salt air than a cheap finish, which is why we favor powder-coated systems over painted ones on the coast.
- Rackable vs. stepped panels: On a slope, rackable panels follow the grade smoothly. Stepped panels keep a level top rail but require more posts and more footings.
- Height and picket spacing: Four feet for a decorative front run, five to six feet for a backyard or pool-adjacent barrier. Tighter picket spacing costs more per foot and matters if you’re containing a dog.
- Gates: A single walk gate versus a double drive gate changes the hardware and the post load, so decide early.
What an Aluminum Fence Costs in Pacifica, CA
Plan on $3,500 to $9,000 for a typical residential aluminum fence in Pacifica, with the number most often shaped by linear footage, slope, and finish grade.
| Line item | Typical range |
|---|---|
| Full aluminum fence installation (residential) | $4,000 – $10,000 |
| Heavy-duty / commercial-grade upgrade | adds to base |
| Walk gate | quoted per gate |
| Demo of existing fence | varies by run |
| Permit and coastal review (where required) | varies by parcel |
What pushes a Pacifica job toward the high end: long runs on steep marine-terrace grade, heavy-duty extrusions for wind exposure, multiple gates, and coastal permit conditions. What keeps it low: a shorter, level backyard run in standard residential grade. Your written estimate itemizes posts, panels, gates, hardware, demo, and permits, so the number you see is the number you pay. Calls are answered by a live person, 24/7. Call (866) 320-2646 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica Homes Specifically Do to This Job
Pacifica’s housing stock, mid-century stucco-and-wood ranches and split-levels from the 1950s through the ’70s, plus older beach cottages in Rockaway and Linda Mar, sits on coastal bluffs and steep hillside terraces. That geometry changes an aluminum fence job in ways it never would in a flat inland subdivision. On cantilevered or pier-supported structures and bluff-edge lots, we regularly find that a fence line runs over sloped ground where winter storm runoff can undercut a footing that looked solid in August. Salt-laden onshore winds and the fog belt push us toward powder-coated, corrosion-resistant systems and hardware that won’t rust out in a few seasons. Coastal development permits and erosion-control conditions can apply to bluff-adjacent parcels, and we confirm that before ordering materials. If the project is part of a wider yard or driveway improvement, homeowners often pair this with Driveway Repair & Replacement in Pacifica or Patios, Walkways & Pool Decks in Pacifica, and it’s often scoped as part of a full Fence Installation in Pacifica. We cover the whole of Pacifica, and our fence installation service carries the same written guarantee on every run.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Pacifica
Most residential aluminum fences take two to four working days once materials are on site, with permits adding time up front. On steep or bluff-adjacent lots, footing work can stretch the schedule a day. Call (866) 320-2646 and we’ll give you a realistic timeline for your property.
A standard residential aluminum fence at or under six feet usually clears a simple permit, but coastal-bluff and marine-terrace lots can fall under coastal development review depending on setback. We confirm what your parcel requires and pull the permits for you.
In most cases, yes. We set posts with minimal disturbance and route around irrigation and existing plantings. On hillside or pier-supported structures, we check footing conditions first so nothing gets undermined.
Expect $3,500 to $9,000 for a typical residential run, with heavy-duty grade, long runs on steep grade, and gates pushing toward the top. Call (866) 320-2646 for an exact quote, and estimates are free.
Every aluminum fence we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right.
Get a Free Aluminum Fence Estimate in Pacifica
Call (866) 320-2646 to schedule your free on-site estimate for an aluminum fence in Pacifica. A live person answers, day or night. We’ll walk your property line, check grade and footing conditions, confirm permit scope, and hand you a written line-item price with no surprises. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.