Last updated November 17, 2026
Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Windows & Doors Maintenance Schedule: What to Do and When
The average failed window seal costs $200 – $400 to reseal or replace a pane. The water damage it causes when ignored – a rotted sill, a damaged interior wall, mold behind the drywall – routinely runs $2,000 to $8,000. The inspection that catches it before any of that happens takes four minutes. That’s the whole point of this guide. Most San Francisco homeowners treat windows and doors as install-and-forget products, and then pay for that assumption in repair bills. We’ve walked through enough San Francisco homes to know the pattern: the fog season comes, the rainy season follows, and by spring the damage is already done. What follows is the four-season schedule we’d hand a homeowner, the failure modes to check for by frame material, and the documentation habit that makes a warranty claim stick.
Quick Answer
Inspect all windows and doors four times a year: lubricate hardware every season, check and clear weep holes each spring and fall, examine flashings and sill pans after every rainy season, and check weatherstripping and caulk before fog season arrives. In San Francisco, add one bonus inspection after any earthquake above a 4.0 magnitude. Each inspection takes 15 minutes. The four-minute version fixes the problem before it becomes a repair bill.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- The Four-Season San Francisco Maintenance Calendar
- How to Lubricate Window and Door Hardware Correctly
- Weep Holes, Flashings, and Sill Pans: The Three Points Nobody Explains
- Frame Material Failure Modes: Wood, Fiberglass, Vinyl, and Aluminum
- What to Check After a Seismic Event
- How to Document Inspections Over Time
- Common Mistakes to Avoid
- When to Call a Professional
The Four-Season San Francisco Maintenance Calendar
San Francisco doesn’t do traditional seasons, and a maintenance calendar written for the Midwest will set you up wrong. Our year runs on fog, rain, and the odd warm dry stretch. The schedule below is built around how Bay Area weather actually behaves, not the calendar in a maintenance manual.
Spring (March through May): The rainy season is ending. This is your most important inspection of the year. Walk every window and door and look for water intrusion – soft wood at sills, bubbling paint, water stains on interior drywall, condensation between panes. Clear every weep hole. Check all exterior caulking. Wipe down tracks and clear debris from slider channels.
Summer (June through August): Fog season arrives on the westside and cooler, damper air settles in. This is the window to re-caulk and re-seal before the moisture returns. Check weatherstripping on all doors – the daylight test works well: if you see light around a closed door, your seal is failing. Lubricate all moving hardware while it’s dry.
Fall (September through November): Prep for rain. Inspect the exterior perimeter of every door. Clear debris from window wells and above flashing. Test door swings and latches – doors that stuck all summer will misalign in wet months. Check gutters and the interface between the window or door frame and the siding or stucco.
Winter (December through February): Watch, don’t work. In heavy rain, monitor for fogging between panes, water stains, or drips at the interior sill. If anything shows up, note where and when. Cold air intrusion from doors is common – check for drafts and tightness of the strike plate. Then re-inspect in March to catch what the rain revealed.
Every season takes about 15 minutes per inspection when you build the habit. Compare that to the $2,000 to $8,000 water damage repair we mentioned at the top. The math isn’t close.
How to Lubricate Window and Door Hardware Correctly
Most homeowners use WD-40 on window cranks and door hinges. On some hardware it’s fine as a short-term fix; on a casement crank, a sliding track, or a deadbolt, it’s the wrong tool for the job. WD-40’s standard formula is a solvent, not a long-term lubricant. It loosens stuck hardware, evaporates, and leaves the metal drier than it started. Use it repeatedly and you strip the protective finish off the mechanism and accelerate wear.
Here’s the correct approach by hardware type:
- Casement cranks and operators: Clean the mechanism with a dry cloth. Apply a light lithium or silicone spray lubricant to the visible moving parts. Open and close the window several times to distribute the lubricant, then wipe off any excess so it doesn’t attract dust.
- Sliding door tracks and window tracks: Vacuum out debris first. Wipe the track clean. Spray a dry silicone lubricant lightly, or use a small amount of paraffin wax on aluminum tracks. Never use an oily lubricant on a sliding track – it traps grit and gumms up the wheels.
- Hinges (interior and door): A drop of light machine oil at the hinge pin, worked in by opening and closing the door a few times. For exterior doors, a heavier grease-type lubricant on stainless or brass hinges holds up better to weather.
- Deadbolts and lock cylinders: Use a dry graphite or Teflon-based lock lubricant made for locks. Never use oil or WD-40 in a keyway – it traps dust, gums up pins, and eventually stops the cylinder from turning. Apply once a season at most.
- Door closers and hinges on exterior storm doors: A silicone spray at pivot points, wiped clean afterward. Check that the closer spring is at the correct tension – doors that slam or fail to close indicate an adjustment is needed, not a lubrication problem.
Our technicians have up to 12 years of experience and we’ve seen the damage from over-lubricated hardware too. On aluminum sliders especially, a light touch is the whole game. More lubricant is not better.
Weep Holes, Flashings, and Sill Pans: The Three Points Nobody Explains
These three parts are what actually protect a window opening from water intrusion, and most homeowners never hear about them after installation day. Contractors install them, hand over the keys, and move on. Here’s what each one does and how to inspect it each season.
Weep holes are the small slots or notches at the bottom outside edge of a window or door frame. They let water that gets behind the exterior surfaces drain out. When they’re clogged – with paint, dirt, debris, insect nests – water backs up inside the frame, gets behind the flashing, and rots the sill or the wall. On each inspection, look for clogged weep holes and clear them with a small tool. Don’t caulk them. We see this constantly on San Francisco stucco homes, where a well-intentioned repainting job fills the weep holes and the whole assembly starts holding water.
Flashings are the metal barriers that route water around and away from the window opening. The critical flashing is the head flashing above the window – water that gets behind the exterior surface at the top has to be directed out at the sides. On each inspection, look for lifted or damaged flashing, separated sealant at the top of the frame, and any signs of rust streaks below the flashing, which indicate water is already finding its way behind.
Sill pans are the sloped metal pans under the sill that catch water that infiltrates the frame and direct it outside. You can’t always see them behind the exterior cladding, but you can infer their condition from the interior. Look for any soft or discolored wood at the interior sill, water stains at the corner, or paint bubbling. Any of these symptoms means you should call a pro to inspect. Sill pan failures aren’t a do-it-yourself fix and they’re the most common cause of the water damage we mentioned at the top.
Frame Material Failure Modes: Wood, Fiberglass, Vinyl, and Aluminum
The single biggest diagnostic shortcut is knowing your material. Each one fails in a different way, which means your seasonal inspection needs to look at different things depending on what you’re standing in front of.
- Wood frames: The maintenance-heavy option, and the one where failures are easiest to catch early. Watch for checking (fine surface cracks), soft spots around the sill and corners, paint peeling or bubbling near the joints, and condensation that dries slowly. Wood needs paint or stain refreshed periodically. When we spec windows for a San Francisco home, we recommend Andersen or Marvin wood and clad products for anyone who wants wood’s look without the constant touch-up; the exterior clad or factory-finish holds up far better in our coastal air.
- Fiberglass frames: Durable and low-maintenance, but not zero. Watch for surface chalking, paint adhesion loss, and hairline cracks at the corners or hardware mounting points. Fiberglass can look perfect right up until a hinge screw pulls out of a piece that’s been slowly cracking. Check hardware attachment points each spring.
- Vinyl frames: Good performers in coastal climates, with a distinct failure mode. Watch for yellowing or discoloration, distortion or bowing near the sill, and hinge-screw pull-out as the vinyl cold-creeps over time. Heat warping is less of an issue in San Francisco than in inland markets, but door frames on westside homes can still distort. If a slider is catching on the track in one spot, the frame may be moving.
- Aluminum frames: Light and durable, but thermally the weakest frame type and prone to condensation on the interior. Watch for condensation moisture running down to the sill, corrosion or oxidation at the frame and hardware, and sealant failure at the perimeter. Aluminum’s old enemy is electrolytic corrosion where it meets steel hardware; check hinges, screws, and lock mechanisms for corrosion each year.
If you’re not sure what frame you have on a given window, look at the corners. Vinyl and aluminum are usually welded or mechanically joined with a visible seam. Fiberglass and wood reads as a painted surface with a slightly different texture. When in doubt, we’re glad to look at photos. Knowing your material determines which seasonal check to prioritize.
What to Check After a Seismic Event
Standard maintenance calendars assume the ground holds still. In San Francisco, it doesn’t always. After any earthquake above a 4.0 magnitude, do a quick walk-through of every window and door opening before assuming normal service. You’re looking for things that a routine inspection wouldn’t catch. Most of the time you’ll find nothing. When you do find something, it matters.
- Check for sticking or racked doors. A door that suddenly drags on the jamb, or won’t latch without a shove, is telling you the frame or wall moved. Mark which door and note the date. One racked door after a quake is worth a call.
- Inspect window frames for cracks at the corners and glass-to-frame joints. Hairline cracks at the frame corners are common and often non-critical. Cracks through the frame, or new visible movement between the glass and frame, need a pro.
- Check the perimeter caulk and sealant at the exterior. Seismic movement opens gaps at the interface between the frame and the wall. That’s a water path even if everything looks fine. Note any gap that’s new.
- Open and close every operable window and door. Tightness, grinding, or a new scrape point indicates the opening has shifted. Lubricate won’t fix a shifted opening – it needs an adjustment.
- Look above and around the openings. Cracks in the wall plaster or stucco that radiate from window and door corners are a foundation-settlement signal, not just a paint problem. If you see this, call a structural pro.
We flag this section because it’s the one piece of the maintenance schedule that doesn’t follow a calendar. The other three seasons are predictable. Seismic checks aren’t. Build the routine and it becomes second nature after the next rumble.
How to Document Inspections Over Time
Here’s the habit that pays off for years: keep a simple inspection log. Photograph each opening from the same angle each season, and write down what you saw. It’s a five-minute habit that, in our experience, is the difference between a warranty claim that goes through and one that gets denied because no one can establish when the problem started.
A good log records:
- The date and season of each inspection
- For each window or door that gets flagged: the location, what you found, and what you did about it
- A dated photograph of anything anomalous (crack, stain, gap in caulk, sticking door)
- Any product applied – which lubricant, which caulk, which weatherstrip product
- Any earthquake event and the date, so you can tie post-seismic findings to the event
When you eventually do call a contractor – for a warranty issue, for a repair, or for a bigger project – the log changes everything. It tells the contractor exactly what changed and when. It cuts the diagnostic visit by hours and it protects your claim by establishing a maintenance history. Warranties, including our own 730-Day Done Right Promise, are easier to honor when the evidence is in front of everyone. A calendar, a phone, and a folder are all you need. Start this habit and you’ll have years of documentation by the time anything fails.
If a specific problem needs professional attention, it may be worth pulling in a contractor with the right trade. Our Groundwork Construction Co. of San Francisco home page lists every service line, and if the window or door problem turns into a bigger exterior project, we handle that too. We’re set up to handle window and door replacement as part of a larger scope, and if the project turns into a bigger exterior overhaul, Home Additions & ADU in San Francisco is where the bigger scope lives on our service menu. If your maintenance walkthrough flags a rotten exterior deck or fence, our Fence Installation in San Francisco page covers replacement options we spec from Jerith, Bufftech, and ActiveYards. Exterior hardscape issues at the base of a wall we’d catch under Driveway & Pavers in San Francisco.
Common Mistakes to Avoid
- Treating maintenance as reactive. The whole thesis of this guide is that most window and door failures are preventable with 15 minutes a season. Buying into the idea that windows “just work” until they don’t is the mistake we get called in to fix, often after water damage has set in.
- Caulking over a weep hole. This is the most common error in San Francisco stucco homes. The weep hole’s whole job is drainage; sealing it turns the window frame into a water bucket. Don’t caulk weep holes, ever, and don’t let a painter caulk them either.
- Using WD-40 on locks and sliding tracks. It displaces moisture but it isn’t the right lubricant for either. It gums up lock cylinders and traps grit in tracks. Use a dry silicone for tracks and graphite for locks.
- Skipping the rainy season inspection. San Francisco’s rainy season is short but sometimes sharp. Skipping it means missing the one season when the water intrusion is most likely to reveal itself. Wait until spring and the evidence is already a repair bill.
- Assuming a new window means no maintenance. Every frame material we listed above has a failure mode that maintenance can catch early. New installations are where nothing gets checked and everything fails later. In our experience, first-year maintenance matters more, not less.
- Not documenting inspections. The single biggest blow to a warranty claim is a homeowner who has no record of when something started. Five minutes with a phone camera and a folder heads off that problem at the gate.
- Ignoring post-earthquake changes. A sticking door after a 4.0+ earthquake is not “just one of those things.” It’s information. Note it and get it evaluated if it sticks more than once.
When to Call a Professional
Most seasonal maintenance is do-it-yourself territory. There are specific moments when it isn’t. Call a professional if you find water intrusion or staining at a sill, if any frame or opening was noticeably affected by a seismic event, if a door or window suddenly stops latching, if you see visible condensation between panes, or if you’re not sure which material you’re looking at and how to treat it. High-tension window and door springs and mechanisms on some products can also pose a safety risk if handled incorrectly; if anything appears to be under tension, stop and call a pro. We’re set up to inspect and repair windows and doors across San Francisco as part of any scope, from a single window to a full exterior overhaul. Groundwork Construction Co. of San Francisco offers free estimates in San Francisco – call (866) 320-2646. Our technicians have up to 12 years of experience, are background-checked, and show up in uniform. Calls are answered by a live person, 24/7, with no voicemail delays.
See the difference
Before
After
Before
After
Before
AfterFrequently Asked Questions
Four times a year, once per season, plus one extra check after any earthquake above a 4.0 magnitude in San Francisco. Each seasonal inspection takes about 15 minutes when you know what to look for. Lubricate hardware every season, clear weep holes in spring and fall, and check flashings and sealant before and after the rainy season. The four-minute version fixes problems before they turn into repair bills.
Vacuum the debris first, then wipe the track with a dry cloth, then apply a light dry silicone lubricant. Never use an oily lubricant on a sliding track – it traps grit and gums up the wheels. For casement cranks, a light lithium or silicone spray works; for deadbolts, a graphite or Teflon lock lubricant is correct. WD-40 is a solvent rather than a long-term lubricant, so it’s not the right product for any of these mechanisms long-term. Call (866) 320-2646 if you’re not sure what hardware is on your opening and want an exact recommendation.
Small repairs run a few hundred dollars; full replacements run into the thousands, with the range depending on the frame material, size, and scope. Failed seals and re-glazing typically sit at the lower end of that range. Water damage repair, if the maintenance inspection misses the problem, runs much higher. We quote line-item pricing so you know what each item costs before work starts. Call (866) 320-2646 for an exact quote – the free estimate and design consult is one of our standing offers, and the number you see is the number you pay.
Window replacement in San Francisco requires a building permit when the frame or rough opening changes, and often when the window type or egress changes. A like-for-like replacement of a single sash or door slab is often exempt. The rules hinge on the scope. We pull permits and pass inspections as part of every job, and we’ll tell you upfront whether your project needs one. Call (866) 320-2646 to talk through your scope and get a free estimate.
Re-caulking a window’s exterior perimeter is a reasonable do-it-yourself task in most cases: clean the joint, apply an exterior-grade sealant, tool it smooth. What’s not do-it-yourself is diagnosing and repairing a sill pan failure, a failed flashing above a window, or water intrusion behind the exterior cladding. Those need a trained eye and often a larger scope of work. If you’re not sure which problem you have, call (866) 320-2646 – the free estimate will tell you whether it’s a five-minute fix or a bigger job.
A single window or door replacement is often completed in a single visit. A full home replacement runs over several days depending on the number and complexity of openings, the frame material, and whether the job pulls a permit. We give a schedule upfront with the line-item quote, and never change the scope mid-project without written approval. Call (866) 320-2646 for a free estimate and an honest timeline for your San Francisco home.
The Bottom Line
Window and door maintenance is a 15-minute habit, four times a year, plus one check after any earthquake above 4.0. Clear weep holes, keep flashings and sealant in good shape, use the right lubricant for each hardware type, and document what you find. That’s the whole schedule. The alternative is the $200 – $400 seal failure that turns into a $2,000 – $8,000 water repair because no one was looking. Our technicians have up to 12 years of experience; we’ve seen both scenarios play out across San Francisco homes, and the documented, well-maintained ones always come out ahead. Keep a log, look at your windows like they’re part of the house, and you’ll never pay for someone else’s maintenance failure again.
Frequently Asked Additional Questions
Weep holes are the small drain slots at the frame’s exterior bottom edge; a failure means water is backing up inside the frame, and it’s a maintenance fix. Sill pan failure means the pan itself under the sill is compromised; it’s a repair, not a clean-out, and needs a pro. Both show up as water at the sill, so it’s worth calling if you’re not sure which you have.
Anywhere you’ll actually look again. A notes app, a folder with dated photos, or the phone camera roll are all fine. The point is a dated record in one place. If you eventually make a warranty claim, that record is what turns a he-said-she-said into a documented history.
Written by the team at Groundwork Construction Co. of San Francisco.