A Groundwork company - serving San Francisco, CA

ActiveYards Fence Installation in San Francisco, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ActiveYards Fence Installation: The San Francisco Owner’s Guide

We install ActiveYards vinyl fencing for San Francisco homeowners, and typical fully installed projects run $4,130 to $10,620 depending on linear footage, grade, and style. ActiveYards is a manufacturer brand sold through dealers, and the fence itself is only as good as its installation. Most San Francisco owners discover something is wrong months after the crew drives off, when a post starts leaning, a gate starts dragging, or a panel starts rattling in the wind off the bay. By then the real problem is usually visible: shallow footings, panels racked out of square, or hardware that was never rated for coastal weather. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with ActiveYards.

Call (866) 320-2646

Which ActiveYards Models This Applies To

ActiveYards makes vinyl privacy, picket, and semi-privacy fencing in several series, and the installation details that matter most are not the style names but the post spacing, panel height, and gate hardware your specific run requires. To identify what you have, look at the fence line itself: measure the distance between post centers (most ActiveYards residential runs sit around 6 to 8 feet), measure panel height from grade to top rail, and check whether posts are set in concrete footings or surface-mounted to brackets. The brand name is usually stamped on rails or post caps, and gate hinges and latches carry their own markings. On the OEM-versus-aftermarket question, we’re direct: for structural components like posts, rails, and gates, match the manufacturer’s specification rather than substituting a generic part, because a mismatched rail profile or post gauge is where racking and sagging start. For hardware like hinges, latches, and caps, a quality aftermarket equivalent is often fine if the finish is rated for coastal conditions. We don’t stock parts and we don’t carry them on a truck; we specify the right components per project and source them accordingly.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ActiveYards Fence Installation Is Failing

  • Posts leaning after rain or wind: usually shallow footings or soil that wasn’t compacted properly. In San Francisco, sandy fill near the Marina and soft soils in parts of the Sunset show this first.
  • Gates dragging or not latching: gate posts taking load they weren’t set to carry, or hinges that were undersized for the gate span. A dragging gate is a structural complaint, not a hardware complaint.
  • Panels racking out of square: rails installed without proper spacing or fasteners, so the panel parallelogram-s out over time. Wind off the Pacific accelerates this on exposed runs.
  • Rattling or loose panels in wind: fasteners backing out or rails not seated fully in post routings. Small gaps let water in and freeze the problem in place.
  • Discoloration, chalky finish, or rust at hardware: coastal salt air and fog attacking finishes and non-rated fasteners. This is a common pattern in San Francisco, where a fence can see salt exposure year-round.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In San Francisco, a vinyl fence installation runs $4,130 to $10,620 installed. That range covers the fence materials, posts, footings, hardware, and labor. What drives the number: linear footage, panel height, number of gates, terrain and grade, soil conditions, and access, which matters a lot on tighter San Francisco lots where a truck can’t reach the back line. We give upfront pricing, itemized, so you see materials and labor separately, and the number you see is the number you pay. Every installation is covered by our 730-Day Done Right Promise, so if workmanship fails inside that window, we make it right.

DIY or Call Us?

An owner can safely check a few things: measure post spacing, confirm panels are square, tighten visible gate hardware, and note where posts are set. What we don’t recommend is resetting posts or rebuilding gates yourself. Post footings depend on soil, frost line, and load, and a gate that falls on a child or a pet is a real risk. Pulling and re-setting a post without proper depth and concrete is how the same lean comes back in a season. A fence failure that could drop a gate or a panel is worth a professional look. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate; we’ll tell you what’s actually wrong before you spend a dollar.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch