Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Home Additions & ADU: The San Francisco Owner’s Guide
If your ActiveYards-related addition or ADU component is failing, we can replace or repair the affected piece with a compatible part, and a full home addition in San Francisco runs $53,100 – $153,400 installed. ADU construction scales higher, from $106,200 to $259,600, and a garage conversion sits between $35,400 and $94,400. Most failures in our experience surface as water intrusion at the roofline or framing, sticking doors on the addition’s exterior, or settlement cracks at the new-to-old wall join. You’ll usually catch it after a heavy winter rain or when an interior door suddenly won’t latch.
Key Takeaways
- Addition and ADU pricing is project-scoped, not a fixed part number, so we quote line-item.
- Component failures usually trace to water, settlement, or hardware fatigue.
- We’re an independent service provider and not affiliated with ActiveYards.
Which ActiveYards Models This Applies To
ActiveYards is best known for fence, railing, and outdoor living products, and it does not publish a standardized line of home-addition or ADU parts the way a garage-door maker publishes spring sizes. That matters for how we source. When you call about a failing component on an ActiveYards-branded structure or accessory tied to an addition or ADU, we identify the part by its function and dimensions rather than by a model catalog, because the addition’s structural and finish components are typically supplied by the framing, roofing, window, and siding manufacturers used in the build.
Start with the label, then measure. Most ActiveYards-branded parts carry a tag or stamped mark, often on the hidden face of a post cap, a rail bracket, or a panel edge. Photograph it, then measure the piece itself: rail or post dimensions in inches, panel thickness, bracket hole spacing, and the length of anything structural. Those measurements, not the brand name alone, are what let us match a compatible replacement. For the addition itself, the parts that most often need replacing are doors, windows, flashing, roofing, and siding – and those come from the trade manufacturers used on your build, which may include Andersen, Pella, James Hardie, or GAF. On the kitchen or bath side of an addition, if fixtures are involved, we also service KraftMaid, Cambria, and Silestone.
OEM versus aftermarket is a real decision. An OEM ActiveYards part gives you an exact fit and matches existing finish, which matters most on visible outdoor pieces and on any part that bears load. A quality aftermarket equivalent can work for non-load-bearing connectors, caps, and trim, usually at a lower cost, but it must match dimensions exactly. We tell you when OEM is the safer call and when it’s overspending. San Francisco additions often mix old and new materials, so exact fit matters more here than in new construction.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ActiveYards Home Additions & ADU Is Failing
- Water staining at the wall junction. A dark line where the addition meets the original house usually means failed flashing or a roof-to-wall seal, not a bad interior finish. San Francisco’s fog-heavy mornings and winter rain load that joint hard.
- Doors and windows that stick. If an exterior door on the addition began dragging this season, settlement or moisture-swelled framing is often the cause. It’s a symptom, not the problem itself.
- Cracks in drywall at corners and seams. New framing settles differently than the original house. Hairlines are normal in the first year or two; widening cracks or stepped cracks in masonry point to foundation movement and need a look.
- Rusted or loose brackets and connectors. Marine air along much of San Francisco corrodes fasteners faster than inland parts of the region. Loose railing brackets or rail caps on an outdoor portion are usually corrosion, not just wear.
- Roof or siding separating at the transition. Lifted flashing or pulled siding near the seam lets water in behind the finish. Catch it early and it’s a repair; catch it late and it’s framing work.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Price depends on scope, because an addition or ADU isn’t a single part swap but a set of components. Here’s how San Francisco pricing runs:
| Scope | Installed Range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: square footage, foundation type, whether you’re tying into existing plumbing and electrical, permit and inspection costs, and materials. We quote line-item, parts plus labor, so you see what each component costs. The work is backed in writing by our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing, no surprises, and the number you see is the number you pay.
DIY or Call Us?
You can safely check and document: photograph labels, measure components, note where water is appearing, and watch whether a crack is widening over a month. Write down the date you first noticed each issue.
Where DIY goes wrong: additions and ADUs sit on foundations and integrate with the original structure’s framing, waterproofing, and structural load path. Cutting into a wall-to-roof junction or re-flashing an addition without knowing the assembly can let water into the wall cavity, and untrained foundation or structural adjustments can compromise the whole build. This is not a part you swap on a Saturday. For anything structural, water-related, or load-bearing, call a trained professional. Most projects in San Francisco need permits pulled and inspections passed, and the scope decides the timeline rather than a single visit.
We’re an independent service provider and not affiliated with ActiveYards. Call (866) 320-2646 to schedule your free estimate – a live person answers, 24/7.
FAQs
Well-built exterior components typically last ten to thirty years, with fasteners and flashings usually the first to go in San Francisco’s marine air. Corrosion and water are the main enemies, so salt exposure and roof drainage decide lifespan more than brand. Call (866) 320-2646 for an exact assessment – estimates are free.
Often yes – flashings, brackets, and trim can frequently be repaired, while structural or foundation issues usually need replacement work. We diagnose first and tell you honestly which is the better call. Call (866) 320-2646 for a free estimate.
Timeline depends on scope: a component repair may take a day or two, while an addition or ADU runs weeks to months, including permits and inspections. We give you a schedule before we start. Call (866) 320-2646 to talk through your project.
We match by function and exact measurement first, then source OEM ActiveYards parts where fit and finish matter and quality aftermarket equivalents where they don’t. We quote both so you can decide. Call (866) 320-2646 for a free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.