A Groundwork company - serving San Francisco, CA

Ameristar Construction Service in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why San Francisco Homeowners Choose Ameristar Construction

We provide independent Ameristar construction service in San Francisco, installing and repairing Ameristar kitchen and bath cabinet lines and vanity SKUs. What sets our Ameristar work apart is that we’re not tied to the brand: we reface with matching Ameristar fronts when the box core is sound, and we tell you to replace when it isn’t. Our technicians have up to 12 years of experience with these cabinet lines, and we work across San Francisco’s older flats, hillside row houses, and small rental condos. We are an independent Ameristar service provider, not an authorized dealer or factory representative. Call (866) 320-2646 to schedule a free estimate.

Call (866) 320-2646

Why Trust Groundwork Construction Co. of San Francisco for Your Ameristar Construction?

San Francisco construction is defined by building on and beside steep hills in one of the densest, most historic urban cores in the country. Nearly every project here involves tight lots, hillside foundations, and a discretionary planning gauntlet that can run a year or more before a shovel hits dirt. That matters for Ameristar cabinet work more than it sounds, because pre-1906 gold-rush-era and post-1906 rebuild stock means the wall and floor behind your vanity is rarely plumb, and a stock cabinet box set into an out-of-square opening will rack, bind, and rub within a season.

Our technicians know the Ameristar lines that move through building-supply and dealer channels: base, wall, tall and vanity SKUs, shaker and slab-front door styles used in rentals and starter condos, and door and drawer fronts used as refacing material on older boxes. We source OEM-compatible parts and matching fronts so a repair stays warranty-safe, and we always check that a replacement box or face matches the run you already have. Every project is covered by our 730-Day Done Right Promise, and we price it upfront so the number you see is the number you pay.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Ameristar Construction Problems We Fix in San Francisco

Marine fog, persistent damp, and salt air from the Pacific and the Bay are hard on cabinet materials, especially on the west-side hills where exposed surfaces take the brunt. What we actually see on Ameristar products in San Francisco:

  • Swollen particleboard and MDF boxes at the toe kick and under-sink floor. A slow supply or drain leak soaks the core, the box bottom delaminates, and screw holding softens. It’s the single most common Ameristar failure we get called for.
  • Thermofoil and laminate door faces peeling or blistering at the edges. Heat and steam do it fastest on doors near the range or under a bathroom vent. Once the foil lifts, moisture gets behind it and the edge curls.
  • Painted and foiled fronts chipping at the drawer and door stiles. Hardware re-tightened over and over enlarges the screw holes and cracks the finish at the stress point.
  • Vanity and base boxes racking out of square. Older San Francisco buildings settle, so floors and walls fall out of level. A rigid Ameristar box forced into that opening twists, doors rub, and drawer glides bind.
  • Discontinued SKU matching. A single damaged box on an older run is often the hardest call, because the exact Ameristar front or size may no longer be produced. Matching fronts and filler strips usually solve it without tearing out the whole run.

Ameristar Parts & Our Repair-vs-Replace Approach

Ameristar cabinets are built to a price point, and that shapes the honest call. Matching Ameristar door and drawer fronts and filler strips are the practical route when one box or door is damaged and the rest of the run is sound. Full-box swaps make more sense than chasing a discontinued SKU, and if the box core has swollen or the cabinet run is out of square, the right advice is to replace rather than repair. We source OEM-compatible parts for each job; we don’t claim to hold Ameristar stock locally, so lead time depends on the SKU.

We decide repair or replace on what we find in the box, not on what’s easiest to sell. For a cabinet installation in San Francisco, the authoritative range runs $4,720 – $15,340. Call (866) 320-2646 for a free estimate on your Ameristar job.

Our Ameristar Service Process – Step by Step

  1. 1
    Diagnosis. We confirm whether the Ameristar box has swelled, check the wall and floor for level, and trace any leak back to its source before touching the cabinet. Fog-season moisture and old plumbing are the usual culprits.
  2. 2
    Repair or install. For a reface, we square the opening and fit matching Ameristar fronts and filler strips. For a swap, we set a new box plumb and level, shimming to the real San Francisco floor line rather than assuming it.
  3. 3
    Test. Every door and drawer gets opened and closed through its full travel. We check glides, hinges, and clearances, and confirm no box rubs against the wall or adjacent cabinet.
  4. 4
    Warranty. The work is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ameristar Products We Service & Install in San Francisco

We work on the Ameristar cabinet lines sold through building-supply and dealer channels: base, wall, tall and vanity SKUs; shaker and slab-front door styles common in rentals and starter condos; vanity bases and matching cabinet boxes in small baths; and door and drawer fronts used as refacing material on older boxes. We handle cabinet installation and refacing, small and partial kitchen remodels, and bathroom vanity installation across San Francisco.

We Also Service These Brands

Groundwork Construction Co. of San Francisco works across brands, so you’re never pushed toward one manufacturer. Alongside Ameristar, we service and install KraftMaid, Cambria, Silestone, and Kohler, among others. That range means we can match an Ameristar reface to the countertop and fixtures already in your kitchen, or recommend a different cabinet line when the layout calls for it.

FAQs – Ameristar Construction Service in San Francisco

Service San Francisco Price Range
Cabinet Installation $4,720 – $15,340
Small Kitchen Remodel $10,620 – $23,600
Kitchen Remodel $16,520 – $53,100
Bathroom Vanity Installation $945 – $3,540
Small Bathroom Remodel $5,900 – $14,160
Bathroom Remodel $10,620 – $33,040

Book Your Ameristar Service in San Francisco, CA

Whether it’s a soft vanity box, a peeling Ameristar door front, or a full cabinet run, we’ll diagnose it, quote it upfront, and back the work with our 730-Day Done Right Promise. Call (866) 320-2646 to schedule your free estimate in San Francisco.

Written by the team at Groundwork Construction Co. of San Francisco.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch