Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Fence Installation: The San Francisco Owner’s Guide
Belgard fence installation in San Francisco typically runs $4,130 – $10,620 installed, depending on linear footage, wall height, and how much site prep your slope demands. Most single-section jobs are wrapped in a single visit once materials are on site. This page is for owners whose Belgard wall or fence component has cracked, leaned, or started letting water through, and who want the right replacement matched to the exact block or panel they already have.
Most San Francisco owners discover the problem the same way: a hairline crack in a cap block after a wet winter, a wall that leans a half-inch more than it did last spring, or mortar joints in a column that crumble when you press them. Belgard makes segmental retaining walls and decorative fencing components, and the parts have to match the series or the repair won’t lock in. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Belgard.
Which Belgard Models This Applies To
Belgard’s wall and fence line covers several distinct families, and the block profile you have determines which cap, corner, and connector pieces will actually fit. The common residential systems here are the segmental retaining wall series (stackable, pin or lip-connected blocks) and the decorative garden wall lines. You cannot swap a cap from one series onto the wall core of another. That’s the single most common compatibility gotcha we see on San Francisco properties: an owner buys a cap block that looks identical in the photo but has a different setback or lip depth, and it never seats flat.
Identify your system by measuring, not by eyeballing. Record the face width and height of a single block to the nearest eighth of an inch, the wall’s total height, and whether the blocks are pinned, lipped, or glued with construction adhesive. Photograph the exposed end of the wall so the connector type is visible.
OEM vs. aftermarket for Belgard
For visible face blocks and caps, use the OEM Belgard piece. Color lots shift between production runs, and an aftermarket lookalike will read as a patch from across the yard. For hidden structural components like geogrid, drainage aggregate, and base material, quality aftermarket equivalents perform identically and cost less. We don’t stock parts and we don’t carry inventory on a truck; we source the correct piece to your measurements before the install date.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Fence Installation Is Failing
- Stair-step cracking through the block faces. This usually means the base wasn’t compacted to depth or the wall is moving. In San Francisco’s expansive clay soils, a shallow base lets the whole wall rotate after a wet season.
- Leaning or bulging wall sections. Water is building up behind the wall because drainage aggregate or weep points are blocked or were never installed. Segmental walls fail from hydrostatic pressure far more often than from the block itself.
- Crumbling mortar at columns and pilasters. Columns are the highest-stress points on a Belgard fence build, and mortar that powders when pressed means freeze-thaw or salt air has worked the joints loose.
- Cap blocks that rock or lift. A cap that moves lets water into the core of the wall. Once water is inside, the freeze-thaw cycle in the Bay Area’s cool nights opens cracks fast.
- Settlement at the wall ends and corners. Corners carry the most load. If the corner block has dropped, the base under it has likely washed out or was never deep enough for San Francisco’s hillside grades.
Replacement Cost & What’s Included
Installed Belgard fence and wall work in San Francisco lands in the $4,130 – $10,620 band for typical residential scope. The number moves with linear footage, wall height, and access: a flat Noe Valley backyard is a very different job from a steep Excelsior hillside where material has to be hand-carried. Here’s how the range breaks down:
- Demolition and haul-off of the failed section: included.
- Base excavation and compaction to depth: included, and this is the line most cheap bids skip.
- Drainage aggregate and geogrid where grade requires it: included.
- OEM block, cap, and corner pieces matched to your series: included at material cost.
- Labor and finish: included.
You get upfront pricing with no change orders for the agreed scope. Work is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Financing is available at 0% for 18 months, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Photograph and measure the block profile. Probe the base with a screwdriver to see how deep the compacted material goes. Look behind the wall for standing water or a blocked drain. Clearing a weep point or a clogged drain line is a reasonable weekend task.
Rebuilding a segmental wall is not. A Belgard wall is a structural system: base depth, compaction, geogrid placement, and drainage all determine whether it stands for decades or leans by the second wet season. Getting it wrong on a San Francisco slope can also mean a wall that pushes into a neighbor’s property, which is a permitting and liability problem, not just a cosmetic one. We pull the permits and pass the inspections. If your wall is leaning more than an inch or cracking is stair-stepping, call (866) 320-2646 for a free estimate.
FAQs
A properly built Belgard wall lasts 50-plus years, and the block itself will outlast the installation. The failure point is almost always the base and drainage, not the material. Walls built on an under-compacted base in San Francisco’s clay soil often show movement within 5 to 8 years. Call (866) 320-2646 for an assessment; estimates are free.
Yes, if the failure is localized to a section, a cap run, or a column. We can reset a leaning section, replace cracked caps, and rebuild drainage behind the wall without tearing out the whole run. If the base has failed across an entire length, a partial repair just moves the problem. We’ll tell you which one you’re looking at. Call (866) 320-2646 for a free estimate.
A single failed section or column is usually completed in a single visit. Full wall rebuilds run multiple days depending on footage, base depth, and access. We schedule the material delivery before we start so there’s no idle time on your property. Call (866) 320-2646 to get on the schedule.
We match the piece to your measured block profile, connector type, and color lot. You’ll have the measurements or a photo of the wall’s exposed end. We order the OEM piece from Belgard’s distribution before the install date, so the color and profile match your existing run. We don’t stock parts and don’t carry inventory on a truck. Call (866) 320-2646 to start the match.
Get a Free Estimate on Your Belgard Fence Project
If your Belgard wall is leaning, cracking, or letting water through, the fix starts with knowing exactly what you have and what it takes to make it right. Groundwork Construction Co. of San Francisco installs and rebuilds Belgard fence and wall systems across the city, backed by the 730-Day Done Right Promise, upfront pricing with no surprises, and live people answering the phone 24/7. Our technicians have up to 12 years of experience, and every one is background-checked and arrives in uniform. We also work with KraftMaid, Cambria, and Silestone on other projects across the home.
Call (866) 320-2646 for your free estimate. The number you see is the number you pay.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.