Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Home Additions & ADU: The San Francisco Owner’s Guide
We build and finish Belgard-specified home additions and ADUs in San Francisco, with installed pricing that typically lands between $53,100 and $153,400 for a home addition and $106,200 to $259,600 for a full ADU. These aren’t repairs. An addition or ADU is a multi-month build that needs permits, foundation work, and a Belgard paver or hardscape finish matched to the rest of your property. Homeowners usually land on this page after a contractor told them their planned addition “won’t match the existing pavers” or after they found a bag of Belgard product specs in a drawer and wanted to know if it could be matched at all.
Which Belgard Models This Applies To
Belgard makes pavers and hardscape products, not whole structures, so the “model” question is really about which Belgard paver line or wall block your addition or ADU exterior needs to match or extend. Common Belgard lines we see on San Francisco properties include the Urbana, Catalina, and Dimensions paver series, plus wall and step units from the Belair and Weston lines. To identify what you have, check the original landscape or construction drawings (often bundled with your permit set), measure a full paver field and count courses to back out unit size, and look for any leftover pallet banding that lists the series name.
Here’s where Belgard gets tricky in San Francisco: paver color lots shift between production runs, so a newer Belgard unit of the same series may not match a ten-year-old installation under natural light. That’s the single most common compatibility problem we see on additions where the new structure meets an existing Belgard driveway or patio. On OEM-versus-aftermarket, Belgard’s own matching units are usually the right call for visible sightlines, while a compatible but non-Belgard base or bedding material is fine underneath where nobody sees it. We’re an independent builder and not affiliated with Belgard – we source and install to your spec, brand name or not.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Home Additions & ADU Is Failing
On an addition or ADU, a “failing” Belgard element usually means the hardscape tied to the structure is moving, draining wrong, or pulling away. What we see on San Francisco jobs:
- Pavers settling near the new foundation. Backfill that wasn’t compacted in lifts lets the Belgard field drop a half-inch over the first wet season. That gap channels water against the addition’s slab edge.
- Efflorescence that keeps coming back. White bloom on Belgard units after rain points to moisture wicking from below, usually a base or drainage issue rather than the paver itself. Repeated cleaning without fixing the source is wasted effort.
- Joint sand washing out along the ADU entry. San Francisco’s winter storms push water across flat transitions, and if the polymeric sand wasn’t set correctly, it migrates within a season. New sand alone won’t hold if the slope is wrong.
- Wall or step units heaving at a corner. A Belgard retaining or step unit tipping at one edge usually means the base wasn’t deep enough for the soil. Left alone, it works loose and becomes a trip hazard at the doorway.
- Color mismatch where the new build meets the old. Not a failure exactly, but a real complaint. A fresh Belgard run next to a weathered one shows even when the units are correct, and it’s a decision to make before the first pallet lands.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacement cost depends on scope. A full home addition in San Francisco runs $53,100 to $153,400; a ground-up ADU runs $106,200 to $259,600; a garage conversion runs $35,400 to $94,400. The Belgard hardscape portion (patio, driveway, steps, wall units tying into the new structure) is itemized separately inside those figures. What drives the range: foundation depth on sloped lots, how much existing Belgard has to be pulled and reset to match, permit complexity through San Francisco’s planning process, and drainage work.
We price with upfront pricing, no surprises, and a written line-item quote so you see the Belgard units, base, labor, and permits as separate lines. Every project carries the 730-Day Done Right Promise – if it’s not done right, we make it right – and we pull the permits and pass the inspections rather than leaving that to you. Free project estimate and design consult, and $1,000 off projects over $10,000.
DIY or Call Us?
An honest split. You can safely check what Belgard series you have, photograph the failing area, measure the settled drop, and read your original permit drawings. That’s useful information for a real quote.
What you shouldn’t do is pull and reset paver runs tied to a new foundation, rebuild a retaining or step unit, or re-grade drainage against your addition yourself. On an addition, the Belgard field is part of the structure’s water management, and getting the slope or base wrong means water against your foundation for years. Foundation and structural work also needs permits and inspections – do it unpermitted and you create a real problem at resale. Our technicians have up to 12 years of experience on this, and it’s better spent than your weekend. Call (866) 320-2646.
FAQs
Installed over a properly compacted base with correct drainage, a Belgard paver field tied to an addition typically holds 25 to 30 years in San Francisco’s climate. The variable is the base and drainage, not the paver. Call (866) 320-2646 for a free estimate on your specific site.
Often yes, if the base is intact and only joint sand or a few units have moved – a targeted reset costs far less than a rebuild. If the failure traces to drainage or foundation backfill, a patch just fails again. We’ll tell you which one you have. Call (866) 320-2646 – estimates are free.
A targeted reset around an ADU entry takes a day or two; a full Belgard field tied to a new addition is scheduled inside the build timeline, not on its own. The addition itself is a multi-month project. Call (866) 320-2646 to get a real timeline for your job.
We identify your series from your drawings or a physical sample, then source from Belgard’s current product line and check color lot against your existing units before ordering. We don’t carry parts in stock, so we order to your spec. Calls are answered by a live person, 24/7 – (866) 320-2646.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.