Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The San Francisco Owner’s Guide
Boral bathroom remodeling in San Francisco typically runs $10,620 to $33,040 installed, depending on scope, tile selection, and whether we’re reworking plumbing or layout. We install Boral-compatible bathroom systems across San Francisco, and most jobs get a free on-site estimate and design consult before any work is scheduled. Owners usually discover a failing Boral component the same way: a hairline crack spreading across a wall tile, grout that keeps crumbling no matter how many times it’s patched, or a shower pan that stays damp long after the last shower. In San Francisco’s older housing stock, those symptoms often trace back to movement, moisture infiltration, or a substrate that was never properly prepped, not to the tile itself.
Which Boral Models This Applies To
Boral’s bathroom-facing product lines cover wall tile, floor tile, and exterior cladding used on additions, so “Boral bathroom remodeling” can mean a few different systems. The most common in San Francisco homes are Boral’s ceramic and porcelain wall and floor tile lines and its stone-look series, which often carry a series name and a shade/code printed on the original carton or the back of a loose tile. Before we quote anything, we ask you to photograph that label or measure the tile face (common sizes run 12×24, 13×13, and 18×18 inches) so we match the right series, finish, and a comparable replacement. If the original shade is discontinued, we walk you through the closest current equivalent and show samples side by side before you commit. This is an independent service; we’re not affiliated with Boral, so we source genuine Boral or a quality equivalent based on what’s actually still in production, never guessing at a match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
- Hairline cracks spreading across tile faces. Usually caused by substrate movement or a missing uncoupling layer under the tile, not a defect in the tile itself. Left alone, cracks let moisture into the substrate.
- Grout that keeps crumbling or washing out. Often a sign of ongoing moisture intrusion or the wrong grout for a wet zone. Repointing without finding the source just delays the real failure.
- Hollow-sounding or lifting tiles. A dull thud when tapped means the bond has broken loose, commonly from poor thinset coverage or a floor that flexes. Tiles that sound hollow in a shower wall are a warranty-level concern before they fall.
- Damp shower pans or soft spots near the drain. In San Francisco’s cool, humid coastal air, a failing pan liner never dries out and the damage spreads quietly. This is the failure most worth catching early.
- Efflorescence or white crusting at grout lines and baseboards. That chalky bloom is salt pushed up by moisture moving through the assembly. It’s the visible tip of a water problem behind the tile, not a cleaning issue.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed bathroom remodeling in San Francisco runs $10,620 to $33,040, and smaller scopes land in the $5,900 to $14,160 range for a small bathroom remodel. A walk-in shower installation typically falls between $5,310 and $14,160, a tub-to-shower conversion between $4,130 and $11,800, and a straight shower replacement between $3,540 and $10,030. What drives the spread: tile selection and coverage area, whether we’re correcting a failed substrate or pan, plumbing relocation, and fixture grade. Every quote is upfront pricing with no surprises, broken down line by line for materials and labor, so you see exactly what the material and the work cost. All work carries the 730-Day Done Right Promise, and every job is backed in writing. If you’re weighing stone-look options, we also work with Cambria and Silestone for vanity tops alongside the tile work.
DIY or Call Us?
You can safely pull a loose tile, photograph the label, measure the face, and note where the failure shows up. What you shouldn’t take on yourself is the repair behind it. Bathroom tile failure is almost always a water-management or substrate problem, and there’s real risk in cutting into a wall blind: you can hit a supply line, a drain, or buried wiring, and a botched pan repair can leak into the unit below yours. In a San Francisco multi-unit building, that leak gets expensive fast. Our technicians have up to 12 years of experience reading these failures and correcting the cause, not just the surface. Call (866) 320-2646 and a live person answers, 24/7, to set up a free estimate.
FAQs
Properly installed Boral tile should hold up 20 to 30 years or more, but the tile is rarely what fails first; the substrate, pan, and grout do. In San Francisco’s damp coastal climate, a poorly waterproofed shower can start showing trouble within a few years. Call (866) 320-2646 if you’re seeing cracks or efflorescence, and we’ll assess the cause during a free estimate.
Sometimes yes: a few loose tiles with an intact, dry substrate can often be reset and regrouted. But if the failure traces to moisture or movement, patching just hides it. We check the substrate first and tell you straight whether a repair will hold. Call (866) 320-2646 for an honest assessment at no charge.
A targeted tile repair is often a single visit, while a full shower or bathroom re-tile typically runs one to three weeks depending on scope and curing time. We give you a realistic schedule in the written estimate, not an optimistic guess. Call (866) 320-2646 to talk through your timeline.
We identify the series and shade from your carton label, tile back stamp, or exact face measurement, then confirm what’s still in production. If the exact line is discontinued, we present the closest current Boral match or a quality equivalent with samples in hand. We’re an independent provider, not affiliated with Boral, and we don’t stock parts or carry them on a truck; we order what your job needs. Call (866) 320-2646 to start with a free estimate.
If your bathroom is showing cracks, crumbling grout, or a shower pan that won’t dry out, don’t let it spread into the framing. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free estimate and design consult. A live person answers around the clock, pricing is upfront with no surprises, and every job is covered by our 730-Day Done Right Promise. We also work with KraftMaid, Cambria, and Silestone on the surrounding finishes, so one team can carry your project from foundation to finish line.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.