Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The San Francisco Owner’s Guide
We install and repair Boral-compatible windows and doors across San Francisco, and full unit replacement typically runs $5,310 – $17,700 for standard windows and $9,440 – $29,500 when impact-rated glazing is required. The repair path is often narrower than that: a failed sash balance, a stripped hinge, or a worn weatherstrip can usually be corrected without replacing the whole unit. Most owners discover the problem the same way – a window that won’t stay open, a door that drags on the sill, or a draft they can feel along the frame on a foggy Outer Sunset morning. By then the part has usually been failing for months.
Key Takeaways
- Boral window and door parts are matched to series and vintage, not just opening size – measure the frame, not the glass.
- San Francisco’s salt air and constant fog cycle weatherstrip and hardware faster than inland climates.
- We’re an independent service provider, not affiliated with Boral, and we source parts to your specific model.
- Installed replacement ranges from $5,310 to $29,500 depending on glazing and opening count.
Which Boral Models This Applies To
Boral’s residential window and door line covers aluminum and vinyl framed products sold under several series names, and the parts are not interchangeable between them. A sash balance from one series won’t seat correctly in another even when the opening measures the same. That’s the single most common compatibility gotcha we run into in San Francisco: an owner measures the glass, orders a part, and it arrives a quarter-inch off because the frame extrusion is a different profile.
Here’s how to identify what you actually have. Look for the AAMA or NFRC certification label, usually stuck to the top or side of the sash or hidden in the head jamb. That label carries the manufacturer, series, and a model code. If the label is gone, measure the frame opening (not the glass), the sash thickness, and the balance channel width – those three numbers will narrow the series. Photograph the corner joint where the frame meets the sill; the profile shape is distinctive per series.
For most Boral repairs, an OEM part is the right call when the unit is under a decade old and the hardware is still in production. Past that, a quality aftermarket balance or hinge assembly from a matching-profile supplier works and often costs less. We won’t put a part in that we can’t stand behind – the 730-Day Done Right Promise covers our workmanship on the repair, and if it fails inside that window, we make it right. If you also have KraftMaid, Cambria, or Silestone installations in the home, the same one-call service applies.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- Window won’t stay open or slams shut. The sash balance has lost tension or the balance shoe has cracked. On a double-hung Boral unit, this is usually the first part to go, and it’s the most common repair we handle in San Francisco.
- Door drags on the sill or hits the jamb at the top. The hinge screws have pulled from the frame or the hinge leaf has bent. Repeated fog-and-dry cycles warp the frame slightly and put load on the hinges.
- Draft or water along the frame edge. The weatherstrip has compressed or the corner seal has separated. Salt air accelerates this, and it shows up as condensation on the inside of the frame before it shows up as a leak.
- Fogging between the panes. The insulated glass seal has failed. This is a glass unit replacement, not a hardware fix, and it’s worth pricing before the whole window gets replaced.
- Hard-to-turn lock or a handle that spins. The locking mechanism’s cam or the handle’s spline has worn. A loose handle is often a stripped internal gear, and it gets worse fast once it starts.
Replacement Cost & What’s Included
Installed window replacement in San Francisco runs $5,310 – $17,700 for a typical job. Impact-rated glazing, which some owners add for noise and safety, pushes that to $9,440 – $29,500. The range is driven by opening count, whether the frame is reused or fully replaced, and glazing spec. A single sash balance or hinge repair sits well below those numbers and we quote it line by line before we touch anything.
What’s included: the part, labor, disposal of the old unit, and a written quote before work starts. Our upfront pricing means the number you see is the number you pay – no change orders slipping in at the end. Every repair and replacement carries the 730-Day Done Right Promise. For larger projects over $10,000, we offer 0% financing for 18 months and $1,000 off.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some checks are safe for an owner. You can photograph the certification label, measure the frame opening, test whether the sash balance has tension by lifting the sash, and confirm whether a draft is coming from the weatherstrip or the glazing seal. Those observations help us quote accurately.
Where DIY goes wrong: sash balances are under spring tension and can release with force if the channel is disassembled without the right tool, and a dropped sash on a second-story window is a real hazard in San Francisco’s older homes. Hinge replacement on a heavy door is a two-person job. We’d rather you photograph the problem and let a trained technician handle the swap. Our technicians have up to 12 years of experience with these units, and calls are answered by a live person 24/7.
Call (866) 320-2646 to schedule a free estimate and get the part matched to your Boral model.
FAQs
Weatherstrip and sash balances typically last 8 – 15 years in San Francisco’s salt-air climate, and often less on the foggy west side where the wet-dry cycle is constant. Hardware on the sunny, sheltered east side tends to last longer. If a part is past 10 years, expect to replace it rather than adjust it.
Yes, most hardware failures are repairable – a balance, hinge, lock, or weatherstrip swap fixes the unit without replacing the window or door. Fogged glazing is the exception; that needs a glass unit replacement. Call (866) 320-2646 for a free estimate and we’ll tell you which path is cheaper.
Most single-part repairs are completed in a single visit, usually within a few hours. Full window replacement takes longer depending on opening count and whether the frame is being rebuilt. We give you a clear timeline in the written quote before we start.
We match the part to the series using the certification label or, if it’s missing, the frame measurements and profile photos you provide. We’re an independent service provider, not affiliated with Boral, and we’ll source OEM where it’s the right fit or a quality aftermarket equivalent where it makes more sense. Call (866) 320-2646 and we’ll confirm compatibility before ordering anything.
Schedule Your Boral Repair in San Francisco
Whether it’s a sash that won’t stay up, a door that drags, or a full replacement, we’ll give you a straight answer and a written price before any work starts. Upfront pricing, no surprises. Call (866) 320-2646 for a free estimate – a live person answers 24/7.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.