Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Driveway & Pavers: The San Francisco Owner’s Guide
We install Cambria paver driveways and hardscape in San Francisco, and most residential projects land in the $8,260 to $21,240 range installed, depending on square footage, base prep, and whether the existing slab has to come out. We quote from measurements, not phone guesses, and the number you see is the number you pay.
Owners usually find out something is wrong the slow way. A paver sits a quarter inch proud of its neighbors after a rainy week in the Sunset. Efflorescence blooms white on the surface and won’t rinse off. Or a runner of pavers near the curb sinks every spring, and the gutter starts holding water against the garage door. San Francisco’s fog belt and winter rain are hard on a driveway installed over a thin base, which is why we look at subgrade and drainage before we ever talk about the surface.
Key Takeaways
- Cambria-compatible paver driveways in San Francisco typically run $8,260 to $21,240 installed.
- Most failures trace back to base depth and drainage, not the paver surface itself.
- We’re an independent service provider and are not affiliated with Cambria. We install Cambria product as part of a full driveway build.
- Every job is covered by the 730-Day Done Right Promise.
Which Cambria Models This Applies To
Cambria’s hardscape and paver lines show up in San Francisco on everything from single-family Sunset bungalows to new-build ADU pads in Bernal Heights, and matching the right product to the right exposure matters more than most homeowners expect. The identifying marks sit on the packaging at purchase, on the original project paperwork if a prior contractor installed it, or on the product name stamped into the Cambria spec sheet you’ll want on hand. If you don’t have that, we measure the field and borders and identify the pattern from the joint layout and edge restraint configuration.
Here’s the compatibility gotcha worth knowing: Cambria paver profile dimensions and the clip or edge-restraint system that holds them have to match your existing field, or the repair looks like a patched quilt. That applies to the color and finish too. A different production run of the same named product can read slightly differently under San Francisco’s gray winter light, so a repair that uses a mismatched batch will catch your eye every evening. We check the batch and the profile before we order anything.
On the OEM-versus-aftermarket question for Cambria specifically: there’s no proprietary hardware to chase, so the decision is about profile and finish match, not brand loyalty. A compatible paver from another quality maker will perform if the base and drainage are right. What we won’t do is pretend a low-grade substitute is the same material. Cambria is a premium line, and we treat it that way when we specify a replacement run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Driveway & Pavers Is Failing
These are the five symptoms we see most often on Cambria installs around San Francisco, and what’s actually causing each one.
- Pavers settling or heaving after rain. Water is getting under the field and the base wasn’t compacted in lifts. In San Francisco, that typically shows first on the low side of the drive near the sidewalk or garage apron.
- White efflorescence that keeps returning. Mineral salts are migrating through the paver, and that’s a moisture problem behind the surface. If it keeps coming back after a dry stretch, the base is holding water.
- Sand washing out of the joints. Joint sand is eroding faster than it should, which points to insufficient edge restraint or runoff channeling across the field. Once joints open, the field starts to shift.
- Standing water or ponding. The driveway’s slope has drifted from where the original installer set it. A driveway that ponds against the house is a drainage fix, not a surface cosmetic.
- A sunken band near the curb or door. The base under the apron failed, often from a utility trench that was never recompacted properly. This is the most common repair we quote in San Francisco.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what San Francisco homeowners actually pay, calibrated to this market:
| Scope | Installed Range |
|---|---|
| Paver driveway installation (Cambria-compatible) | $8,260 – $21,240 |
| Driveway replacement | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway sealing | $295 – $825 |
The range moves with the drivers you’d expect: square footage, depth of base removal, whether the existing slab or pavers have to come out and haul away, drainage corrections, and whether the scope includes a border course. We itemize parts, labor, base prep, and disposal on the written quote, so you can see what each line costs. Base prep is where cheap bids cut corners, and it’s the line we won’t hide. Every install is backed by the 730-Day Done Right Promise.
DIY or Call Us?
Some of the diagnosis is yours to do safely. Walk the field after rain and note where water pools. Check whether joint sand is washing out. See whether a paver rocks underfoot, and check that the drive still slopes away from the garage. All of that is fair game.
The repair usually isn’t. Lifting field pavers, re-compacting base in lifts, resetting edge restraint, and blending a repair into the existing pattern without a visible patch is where most DIY driveway work in San Francisco fails its first wet winter. Pulling up a section without a compaction plan just moves the problem. If the base has failed, that’s the point to call us at (866) 320-2646 for a free estimate. We’ll look at the drainage first and tell you honestly whether you need a spot repair or a full redo.
FAQs
A Cambria paver driveway installed over a properly compacted, drained base should hold up 25 to 30 years here. The pavers themselves won’t wear out first; the base does, and in San Francisco’s wet winters a shallow base fails well before the surface should. Call (866) 320-2646 for an exact quote on your driveway – estimates are free.
Yes, often they can, if the failure is limited to a band or a corner of the field. If the base is shot across the whole drive, a spot repair will fail again within a few seasons and a replacement is the honest answer. Call (866) 320-2646 and we’ll assess it and quote both options.
A typical spot repair takes one to two days. A full driveway replacement in San Francisco usually runs three to five days, depending on base prep, drainage corrections, and whether the existing slab has to come out. Call (866) 320-2646 for a schedule built around your project.
We start by identifying your field profile, pattern, color, and batch from your paperwork or the install itself, then order from the manufacturer’s current run. We hand-set pavers to match joint width and edge restraint, so the patch doesn’t read as a patch. If a batch mismatch is likely, we say so before we order. Call (866) 320-2646 to get it quoted.
We install and repair Cambria driveways and pavers across San Francisco and nearby areas, with background-checked technicians and a live person on the phone 24/7. We also work with KraftMaid, Silestone, and Kohler on the broader project side. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate and a written lineup of every line item, or take advantage of $1,000 off projects over $10,000 and 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.