Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The San Francisco Owner’s Guide
We install and repair Cambridge Pavers driveway and paver systems across San Francisco, and a full paver driveway typically runs $8,260 to $21,240 installed. Repairing a failed section, resetting a settled field, or replacing cracked units costs far less than a full install and is often completed in a single visit. Homeowners usually discover the problem the same way: a low spot that holds water after rain, a paver that rocks underfoot, a joint line opening up near the garage apron, or efflorescence blooms that keep returning no matter how often they’re scrubbed.
Which Cambridge Pavers Models This Applies To
Cambridge Paver systems aren’t a single product line, so “my Cambridge Pavers driveway” can mean several different assemblies. The most common systems in San Francisco are the interlocking concrete paver profiles (Cambridge’s Ledgestone, MaytRx, and similar tumbled-face lines) laid over a compacted aggregate base with a polymeric joint sand. What matters for matching replacement units is the face profile, thickness, and color-lot, not just the brand name. Standard Cambridge pavers run 2⅜ inches thick for driveways and 2¼ inches for patios and walkways, and the thickness matters: a walkway paver dropped into a driveway field will crack under vehicle load.
To identify your part, pull a paver from a low-traffic edge or a spare in the garage and measure thickness and width, photograph the face texture, and check for a stamp or batch code on the underside. Cambridge molds a name or code into many units, and that code identifies the series and color mix.
On OEM versus aftermarket: genuine Cambridge replacement units are the only reliable way to match color lot on an older field, because concrete color varies between production runs. A quality aftermarket paver can work for a hidden repair or a full-field replacement where matching isn’t the concern. We source genuine Cambridge units where lot matching matters and tell you plainly when a match isn’t realistic. Groundwork Construction Co. of San Francisco is an independent service provider and is not affiliated with Cambridge Pavers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Rocking or loose pavers. Individual units move underfoot because the bedding sand has washed out or the base wasn’t compacted to depth. This is an early warning, not a cosmetic issue – once water gets under a loose paver, it erodes the base around it.
- Low spots and ponding. Water pooling on the driveway after rain signals base settlement or lost slope. In San Francisco’s wet winters, a low spot that holds water for days accelerates joint-sand loss and freeze-adjacent cracking, so it needs correcting before the next rainy season.
- Joint lines opening up. Wide, sandy joints mean the polymeric sand has failed or washed away. Failed joint sand lets water penetrate the field and is the leading cause of base failure on Bay Area driveways.
- Cracked or chipped units. Cracks usually trace back to a thin base, a paver installed below driveway thickness, or heavy load on an undersupported unit. Cracked pavers can’t be patched – they have to be pulled and replaced with a matching unit.
- Efflorescence and staining. White mineral bloom or oil staining on the face is often the sign owners notice first. Some efflorescence is normal curing chemistry that fades; persistent bloom points to moisture trapped in the base.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In San Francisco, Cambridge Pavers driveway work breaks down into a clear range so you can budget before you call. Prices below are installed, including labor, prep, and disposal:
- Paver driveway installation (full field): $8,260 – $21,240
- Paver driveway replacement (remove and reset): $5,900 – $16,520
- Sectional repair / paver reset: priced by area and base condition
- Paver patio installation (if bundled): $4,130 – $12,980
- Joint sand replenishment and sealing: $295 – $825
What drives the range: driveway square footage, base depth and condition, how many pavers need replacement versus reset, and access. San Francisco hillside and narrow-lot driveways need more hand work and staging, which pushes labor up. You get an upfront, line-item number before work starts – the number you see is the number you pay. All of it is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some checks are safe to do yourself. Clear the joint sand with a stiff broom, hose the field and watch where water pools, lift a loose paver to see whether the base underneath is damp or washed out, and photograph the underside stamp on a pulled unit so we can identify the series. That’s genuinely useful information you can bring to the call.
Where DIY goes wrong is the repair itself. Pulling and resetting pavers without re-establishing a compacted base just moves the failure a season down the road, and resetting a driveway field over an unstable base is heavy, technical work that most homeowners regret attempting. We’d rather you spend an afternoon diagnosing than a weekend redoing it. Call (866) 320-2646 and we’ll walk you through what you’re seeing – live person, 24/7, no voicemail.
FAQs
How long does a Cambridge Pavers driveway last in San Francisco?
A properly installed paver driveway lasts 25 to 50 years in this climate, but the pavers aren’t the weak point – the base is. Bay Area wet winters and clay-heavy soils punish a shallow or poorly compacted base, and we routinely see 15-year-old fields failing because of base work, not the concrete units. Call (866) 320-2646 for an assessment.
Can my failing driveway be repaired instead of replaced?
Usually yes. If the failure is localized to loose pavers or lost joint sand, a sectional reset with new polymeric sand fixes it for a fraction of a full replacement. Full replacement is only the answer when the base itself has failed across the field. Call (866) 320-2646 and we’ll tell you honestly which you’re looking at.
How long does a paver repair or replacement take?
A sectional repair is often completed in a single visit, while a full driveway field typically takes two to four days depending on square footage, base work, and access. San Francisco hillside lots and tight driveways can add a day for staging. Call (866) 320-2646 for a schedule you can plan around.
How do you source the right Cambridge Pavers units for my driveway?
We identify your series and color lot from the paver’s stamp, measurements, and face profile, then source genuine Cambridge units when a color match matters. We tell you upfront when a lot match isn’t realistic so there are no surprises. Call (866) 320-2646 to start with a free estimate.
For Cambridge Pavers driveway and paver work in San Francisco, the fastest path to a real answer is a call. We offer a free project estimate and design consult, 0% financing for 18 months, and $1,000 off projects over $10,000. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and back every job with the 730-Day Done Right Promise. We also service KraftMaid, Cambria, and Silestone across other trades. Call (866) 320-2646 today – a live person answers around the clock.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.