Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Home Additions & ADU: The San Francisco Owner’s Guide
If you’re planning a home addition or ADU on a San Francisco property with Cambridge Pavers hardscape already in place, expect a full-scope build to land between $53,100 and $153,400, with ADUs running $106,200 to $259,600 on their own. We’re an independent construction company, not affiliated with Cambridge Pavers, and we build additions that tie cleanly into existing Cambridge Paver driveways, patios, and walkways instead of tearing them out. Most San Francisco owners discover the mismatch the hard way: the addition gets framed, the finished floor sits two inches off the paver grade, and suddenly the paver threshold, the step-down, and the drainage all have to be reworked.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers doesn’t make an “addition part” the way a garage door opener has a spring. What it makes is the paver line under your addition: the Ledgestone, the Cambridge Cobble, the Old Greenwich, the Maytrix, the Diamond, and their cousins. Each has a different face profile, thickness, and unit dimension, and each has a matching threshold and coping option that determines how the addition meets your existing hardscape. If your house was built or repaved in the last decade, the driveway, walkway, and front stoop likely all come from one Cambridge Paver series installed as a package.
Before anyone quotes your addition, we measure three things: the actual paver thickness (Cambridge’s standard is about 2 3/8 inches, but the Ledgestone system runs thicker), the color lot on the existing field, and the joint width between pavers. Color lots shift year to year. If your existing Cambridge Pavers were installed five years ago, we may not be able to batch-match the color for a new apron or step, and we’ll tell you that on day one instead of surprising you at install. The OEM-vs-aftermarket question matters here: genuine Cambridge coping and edging cost more than compatible aftermarket equivalents, but the aftermarket pieces often read a half-inch thinner and telegraph through the paver field within a season. For additions over $53,100, we recommend genuine Cambridge where it shows and aftermarket only where it doesn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Home Additions & ADU Is Failing
The addition itself doesn’t fail in the abstract. These are the specific failures we see when a San Francisco addition and its Cambridge Paver interface go wrong:
- Water pooling at the new step-down. The addition shifted the drainage plane and the paver field can’t slope away fast enough. In San Francisco, where winter rain lands in concentrated bursts out of the west, standing water finds any low spot in the paver joints within one season.
- Pavers rocking at the threshold. The base under the interface wasn’t re-compacted after the addition’s foundation went in. A single paver settling near a heavy load will telegraph through the field within six to twelve months.
- Efflorescence running down the new wall base. White chalky streaks at the interface mean moisture is being pulled through the paver bedding sand into the new masonry. Common after a San Francisco fog-heavy month when the addition was sealed before the paver field cured.
- Cracking at the joint between addition and existing hardscape. The two structures settled at different rates because the addition footing and the paver base aren’t on the same bearing capacity. This is a design miss, not a materials miss.
- Sunken step treads or coping. The Cambridge coping wasn’t set on a rigid bed, so it pivots as the base compacts over the first wet season. Usually invisible until someone trips on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here are the real numbers for San Francisco, no games:
| Scope | Typical Installed Range |
|---|---|
| Home Addition (full scope) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion (toward ADU) | $35,400 – $94,400 |
| Paver rework at addition interface | Bundled into the addition scope above |
What drives the range: the addition footprint, whether the existing Cambridge Paver field has to be pulled and re-laid to meet the new grade, and how much San Francisco permitting adds on a project with a new hardscape interface. Foundation work, framing, electrical, plumbing, and finish are all in the range. Paver interface work – pulling the field, re-compacting, resetting with genuine Cambridge coping – is quoted as a line item, not hidden in a lump sum. Every project carries our 730-Day Done Right Promise, and the number you see on the estimate is the number you pay. From foundation to finish line, we run the whole scope.
DIY or Call Us?
You can safely walk the interface yourself: look for rocking pavers at the step-down, check for efflorescence at the wall base, and note any pooling after a rain. Those are observations, not repairs. Where we see owners get hurt – literally – is pulling pavers to “reset” a threshold without addressing the base underneath, or trying to chase a settling footing with a shovel and a bag of sand. That re-exposes the foundation drainage plane, and on a San Francisco hillside lot the fix can run double the original interface cost. The parts here aren’t dangerous the way a garage spring is, but the substrate work is where the money goes wrong. Call us at (866) 320-2646 before you lift a paver.
FAQs
A properly bedded Cambridge Paver field lasts 25 to 40 years, but the interface next to a new addition needs resealing and re-compacting within the first wet season after the addition is framed and finished. That’s the realistic maintenance window in San Francisco, where the winter rain cycle is short and intense. Call (866) 320-2646 to schedule a free interface inspection – it’s the fastest way to know what your field actually needs.
Usually yes. If the pavers themselves are sound and the settling is limited to the interface strip, we pull, re-bed, and re-set about two courses at the addition edge without touching the field. That runs as part of the addition scope rather than a separate charge. Call (866) 320-2646 for an exact quote on your San Francisco property – estimates are free.
The paver interface work at a typical San Francisco addition takes two to four working days on top of the build schedule. A full ADU with a new paver apron runs longer because the driveway has to be cured before the apron is set. We give you a fixed schedule with the estimate, and the 730-Day Done Right Promise covers the workmanship, not just the materials.
We order directly from Cambridge Paver distributors and measure the existing field color lot, thickness, and joint width before we place the order. If the exact lot isn’t available, we tell you upfront and propose the closest match rather than installing something that reads wrong six months later. Call (866) 320-2646 to start – we’ll walk your San Francisco property and quote the addition and the paver interface on one estimate. We also service KraftMaid, Cambria, and Silestone cabinetry and countertop lines if the addition includes a kitchen or bath.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.