Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Roofing: The San Francisco Owner’s Guide
Roofing installed by our team is worked to CGI’s published specs and typical San Francisco installed pricing lands between $470 and $2,125 for a repair and $9,440 to $23,600 for a full roof replacement. We’re an independent provider, not affiliated with CGI, so we match the material to your home, your deck and your series label rather than forcing a single SKU. Most owners find out something is wrong the same way: a brown water stain on a ceiling, a shingle corner curling up after a storm, or a grit-filled gutter in early fall.
Key Takeaways
- Repair work in San Francisco runs $470 to $2,125; a full replacement is $9,440 to $23,600.
- Fog-belt moisture, salt air and wind-driven rain drive most of the failures we see.
- Full replacement usually takes one to three days for a typical single-family roof.
- Every job is backed by the 730-Day Done Right Promise in writing.
Which CGI Models This Applies To
CGI roofing systems show up across several product lines: architectural asphalt shingles in the standard and premium weights, three-tab shingles, and the accessory lines (ridge cap, starter strip, underlayment, drip edge). The label on the back of an original shingle bundle or on the inside of a vent, plus the series name, tells us exactly what we’re matching. If you don’t have a bundle left over, we read the granule color, tab exposure and shingle thickness to narrow it down.
Where owners get burned is assuming “a shingle is a shingle.” CGI’s heavier-weight architectural profiles are thicker and stiffer than a builder-grade three-tab, and a thin replacement laid next to a thick field shingle creates an uneven roof plane and a weak spot at the seam. On the accessory side, ridge cap is not interchangeable with field shingle turned sideways, and the underlayment grade matters more in San Francisco than most people realize.
The OEM-versus-aftermarket call is real. A genuine CGI ridge cap or starter strip gives you a guaranteed profile match. A quality aftermarket equivalent in the same thickness and color can save money and work perfectly, as long as the exposure and nail zone line up with the field. We tell owners which is which before we quote. We also service KraftMaid, Cambria and Silestone on the interior side, so a homeowner taking on a whole-house scope can keep one point of contact.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Roofing Is Failing
Below are the symptoms we hear most in San Francisco, each with what’s actually going on underneath.
- Granules in the gutter and downspout. The protective granule layer is shedding early, which exposes the asphalt mat to sun and rain. Once granules are gone in patches, the shingle is on borrowed time.
- Curling, cupping or lifted tabs. Usually a sign of heat cycling, poor attic ventilation, or wind-driven rain working under the edge. In the fog belt, damp mornings followed by dry afternoons stress the mat more than most owners expect.
- Ceiling stains or attic moisture after a storm. A small stain is water finding its way past a compromised flashing, valley or nail line. It almost always traces back to a specific point rather than a whole-roof failure.
- Dark streaks and moss growth. Algae streaks and moss hold moisture against the shingle and accelerate breakdown. We see this on shaded north-facing slopes and under tree canopy frequently.
- Exposed nail heads or rusted fasteners. Backed-out or rusted nails are a leak waiting to happen and a sign the roof has been beaten by salt air and weather over time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest pricing picture for San Francisco. A focused roof repair is $470 to $2,125. A full roof replacement is $9,440 to $23,600, and a metal roof installation runs $17,700 to $47,200 if you’re considering an upgrade. Tile roof repair, for homes with a tile system, is $710 to $2,950.
What moves the number: roof size and pitch, how many layers need tearing off, sheathing that has to be replaced, the flashing and valley work, and the material line you choose. Our pricing is upfront and the number you see is the number you pay, without change-order surprises. Labor and material are broken out where they belong, permits are pulled and inspections passed, and the work carries the 730-Day Done Right Promise. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
DIY or Call Us?
There’s a real divide here. What an owner can safely do: walk the perimeter, look up with binoculars, check the attic after rain, note where stains and granule piles are, and photograph your CGI label. That information speeds up our diagnosis and your quote.
What we’d steer you away from: climbing a steep, wet or moss-covered roof, chasing a leak you can’t trace, and re-flashing around a chimney or skylight if you’re not trained. Fall risk and hidden moisture damage are the hazards. Roof work on an aging San Francisco roof is not a place to improvise. If your roof is leaking or storm-damaged right now, call us and we’ll get a live person on the line.
FAQs
How long does CGI roofing last in San Francisco? A properly installed CGI asphalt roof generally lasts 20 to 30 years depending on material line and ventilation, though salt air, fog and heavy tree canopy can shorten that. Call (866) 320-2646 for an inspection-based estimate.
Can CGI roofing be repaired instead of replaced? Often yes. If the damage is a local flashing, valley or nail-line leak, a targeted repair at $470 to $2,125 usually solves it. A roof at the end of its service life with widespread granule loss is a replacement conversation.
How long does a CGI roof replacement take? Most single-family roofs in San Francisco take one to three days once material is on site. Complex roof lines, tear-off of multiple layers and sheathing replacement add time. Call (866) 320-2646 for a schedule that fits your home.
How do you source the right CGI part? We identify your series from the shingle label or accessory stamp, match thickness, exposure and color, then order the genuine or quality-equivalent part. We don’t claim to carry stock on a truck, so we confirm availability and timeline up front. Call (866) 320-2646 and estimates are free.
If you’re budgeting a fix or a full replacement, start with a free project estimate and design consult. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person 24/7. Built to last, backed in writing, from foundation to finish line. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.