Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose Cover Construction
We provide independent Cover construction service in San Francisco – cabinet installation and refacing, quartz and countertop work, and full kitchen layout – for owners who want the product they chose installed so it performs. What separates our Cover work is the part most installers skip: leveling, scribing and moisture detailing that older San Francisco housing stock actually demands. We’re an independent contractor and not affiliated with or authorized by Cover, so every call we make is driven by your walls, floors and plumbing, not a factory script. Call (866) 320-2646 for a free estimate.
Why Trust Groundwork Construction Co. of San Francisco for Your Cover Construction?
We’ve been in business since 2014, and our technicians have up to 12 years of experience working frameless cabinetry runs in homes where nothing is plumb and nothing is square. That matters on Cover product lines, because the quality of a frameless box is only as good as the surface it lands on. A well-built box set on a floor with a 3/4-inch dip will rack, and every door below it will drift out of alignment within a season.
Our technicians know Cover’s hinge and runner systems specifically – how the adjustment screws behave, where the tolerances tighten, and how the door fronts behave once the cabinet has settled. We source OEM-compatible Cover hinges, runners and fillers wherever those parts exist, and we use quality third-party hardware only when the original is discontinued or the budget is better spent elsewhere. That keeps door and drawer alignment where the factory set it.
Every Cover install and refacing project in San Francisco is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Upfront pricing, no surprises. Calls answered by a live person, 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Cover Construction Problems We Fix in San Francisco
- Racked frameless boxes and drifting doors. Cover’s European-style base and wall cabinets rely on a flat, level surface to hold their geometry. Set on a cupped floor or pushed against a bowed plaster wall in a pre-war San Francisco home, the box twists, and the doors never sit flush again until the run is re-shimmed and re-squared.
- Sagging soft-close hinges and drawer runners. After years of daily use, Cover’s soft-close mechanisms lose their spring and stop, and doors start hanging crooked or drawers stop short of closing. This is a hardware failure, not a cabinet failure – usually fixable with quality replacement parts without touching the boxes.
- Chipped quartz and sintered stone at cutouts and overhangs. Cover slab and shaker-style tops chip at sink cutouts or unsupported overhangs when the cabinet run beneath was never shimmed level. Stone is unforgiving of a flexing base, and a hollow under the edge is an invitation for a crack.
- Moisture swelling at sink bases and dishwasher bays. In San Francisco’s fog belt, cabinet backs and toe kicks that sit tight against a damp wall take on water. Particleboard cores swell and edge banding delaminates long before the fronts show any wear.
- Out-of-square layout in tall pantry and appliance-garage runs. Full-height cabinetry magnifies any plumb tolerance error. If the wall bows a half inch over eight feet, a tall pantry run will gap at the ceiling or the doors will rub through the middle of their swing.
Cover Parts & Our Repair-vs-Replace Approach
We use Cover-specified hinges, runners and fillers wherever those parts still exist, so doors and drawers keep their factory alignment. Where the original is discontinued, we switch to quality third-party hardware and panel goods. Both routes are legitimate – what matters is whether the result keeps the fronts tracking true.
We don’t claim to stock Cover parts locally, and we won’t tell you we do. Every job is sourced to fit: we measure what’s failed, order the correct part, and return once with the right piece. That’s cleaner than substituting a hinge that happens to be on a shelf.
On the repair-vs-replace call, we’re honest. When a single box is wet or racked, replacing that unit plus its fronts is usually the right money. When the whole run is sitting on a failing floor, refacing it just hides the problem – and we’ll tell you so, in writing. Call (866) 320-2646 for a free estimate and a straight answer.
Our Cover Service Process – Step by Step
- 1
Diagnosis. We check floor level across the full run, wall plumb and square, and the condition of each Cover box, hinge, runner and door front. We also probe sink bases and dishwasher bays for moisture before recommending anything.
- 2
Repair or install. For an existing Cover kitchen, we re-level and re-square the run, replace tired hinges and runners with Cover-specified parts, and reset doors to factory alignment. For a new Cover install, we scribe and shim the boxes to the actual wall and floor, not to a level line the room doesn’t have.
- 3
Test. Every door opens through its full swing without binding, every drawer pulls fully closed, and the countertop above is checked for full contact with the cabinet run beneath it – no hollow spots under an overhang.
- 4
Warranty. Every Cover project is covered by our 730-Day Done Right Promise. If a hinge sags or a door drifts in the first two years, we come back and set it right.
Cover Products We Service & Install in San Francisco
We work across Cover’s frameless European-style base and wall cabinets, its slab and shaker-style door fronts, and its quartz and sintered-stone countertop surfaces. We install and reface tall pantry and appliance-garage cabinetry, and we handle the leveling, scribing and moisture detailing around all of it. That covers everything from a full Cover kitchen layout in a Noe Valley Edwardian to a single sink base swap in a Richmond District flat. Every product line runs through the same process: measure the actual room, source the right parts, install to tolerance.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
We aren’t a single-brand shop. Alongside Cover, we service KraftMaid, Cambria, Silestone and Kohler cabinetry and surfaces across San Francisco kitchens. That breadth matters when your room mixes brands or when a discontinued line forces a decision – we can match front styles, hardware and countertop materials across the trade rather than asking you to start over.
FAQs – Cover Construction Service in San Francisco
Is Groundwork Construction Co. of San Francisco authorized by Cover? No. We’re an independent Cover service provider and are not affiliated with or authorized by Cover. We install and service Cover cabinetry and countertops as a local contractor, and every recommendation is based on your room’s actual conditions rather than a factory program.
Do you use genuine Cover/OEM parts? Yes, wherever they exist. We source Cover-specified hinges, runners and fillers first so doors and drawers keep factory alignment. When a part is discontinued, we use quality third-party hardware and tell you exactly what we’re substituting and why.
How long does Cover service take? A hinge and runner swap or a door reset is usually a single visit. A sink base replacement or a partial reface typically runs one to three days. A full Cover cabinet installation depends on layout size and how much leveling and scribing the older walls demand – we give you the timeline in writing with the estimate.
What Cover models/series do you cover? We service Cover’s frameless European-style base and wall cabinets, slab and shaker-style door fronts, quartz and sintered-stone countertops, and tall pantry and appliance-garage cabinetry. If your exact line isn’t listed, call us – the service approach is the same across the range.
Will service void my Cover warranty? No. Repair or replacement with Cover-specified parts keeps your warranty intact, and using proper hardware is what the manufacturer expects of a qualified installer. We document every part we use so you have a clear record.
How much does Cover construction cost in San Francisco?
Cover work in San Francisco runs from a few hundred dollars for a hinge and runner repair up to full kitchen project ranges. Here’s what our projects typically price at:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Backsplash Installation | $945 – $2,950 |
Prices depend on layout, how much leveling and scribing the room needs, and the countertop material you choose. Call (866) 320-2646 for an exact quote – estimates are free.
Book Your Cover Service in San Francisco, CA
If Cover cabinetry is rubbing, chipping or swelling in your San Francisco kitchen, we’ll give you a straight diagnosis and a written line-item quote. Every project is covered by our 730-Day Done Right Promise, and 0% financing for 18 months is available. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco.