A Groundwork company - serving San Francisco, CA
C

CWS Driveway & Pavers in San Francisco, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Driveway & Pavers: The San Francisco Owner’s Guide

We install and repair CWS-compatible driveway and paver systems across San Francisco, with paver driveway installation typically running $8,260 – $21,240 installed and most repair visits scheduled within the same week. Owners usually discover a failing paver system the same way: a driveway section that settles after heavy rain, joints that wash out sand with every storm, or a paver that rocks underfoot when they pull into the garage. San Francisco’s hillside grades and clay soils put more stress on edge restraints and base layers than flat inland lots ever will, which is why the failure shows up here earlier.

Call (866) 320-2646

Which CWS Models This Applies To

CWS produces driveway and paver systems across several series, and the part that matters most is never the paver face itself – it’s the base, edge restraint, and joint system matched to each series. Before you order anything, find the project spec sheet or paver label that came with the original install. It lists the paver thickness in millimeters, the edge restraint profile, and the joint sand type. A 60mm interlocking paver and an 80mm structural paver use different edge restraints, and pairing them wrong on a San Francisco slope is how driveways fail in two winters instead of ten.

For CWS specifically, we decide between OEM and quality aftermarket on a case-by-case basis. Edge restraints, geotextile fabric, and polymeric joint sand all have reliable aftermarket equivalents that perform the same in the field. Face-matched pavers for a repair are a different story: color lot and surface texture shift between production runs, so an OEM-match or a saved batch from your original install is usually the only way to avoid a visible patch. We pull the spec first, then tell you which route saves money without showing on the surface.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Driveway & Pavers Is Failing

Not every rough driveway needs a full replacement. These are the symptoms we see most in San Francisco, matched to what’s actually causing them:

  • Pavers rocking underfoot – base compaction has failed or water is sitting under the paver layer, usually from poor drainage or a missing geotextile barrier. It gets worse with every wet season.
  • Joint sand washing out after storms – ordinary joint sand on a San Francisco grade erodes fast; polymeric sand or a regulated joint system holds up far better against runoff.
  • Edge restraints pulling away or lifting – the paver field has started migrating downhill. This is a base and restraint problem, not a paver problem, and it will not fix itself.
  • Efflorescence (white chalky haze) – mineral salts wicking to the surface through moisture in the base. Some of it is cosmetic, but persistent haze means water is trapped underneath.
  • Sunken or heaved sections near the garage apron – soil movement or a failed transition detail where the driveway meets the slab. Common on San Francisco hillside lots with clay and fill soil.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here are the installed ranges we quote in San Francisco, covering materials, base prep, compaction, edge restraint, and joint sand:

  • Paver driveway installation: $8,260 – $21,240
  • Concrete driveway installation: $5,310 – $14,160
  • Asphalt driveway paving: $4,130 – $10,620
  • Full driveway replacement: $5,900 – $16,520
  • Driveway sealing: $295 – $825

What drives the number: square footage, slope and drainage correction, how much base has to come out, and whether the paver field matches an existing lot. Every quote is line-itemed, upfront pricing with no surprises. The work carries the 730-Day Done Right Promise – if it’s not done right, we make it right, backed in writing.

DIY or Call Us?

You can safely pressure-wash, sweep, re-sand joints, and reseal a driveway yourself. What you shouldn’t take on is base repair, edge restraint replacement, or re-leveling a sunken paver field. Those jobs mean lifting pavers, re-compacting the base, and rebuilding restraint on a slope – get the compaction or the drainage fall wrong and the section fails again within a season, sometimes taking neighboring pavers with it. On San Francisco hills, a DIY re-level that fails can also send water toward the foundation. We’re an independent service provider, not affiliated with CWS, and we’ll tell you honestly if a repair will hold or if replacement is the smarter money. Call (866) 320-2646 to schedule a free estimate.

FAQs

How long should a CWS paver driveway last in San Francisco? A properly installed paver driveway lasts 25 – 30 years locally; the failure here is almost never the paver, it’s base and drainage, which cut that lifespan short on hillside lots. Call (866) 320-2646 for an honest assessment.

Can my failing driveway be repaired instead of replaced? Often, yes – isolated rocking sections, edge restraints, and joint sand can be repaired without a full rebuild, and we’ll tell you when a repair is the right call. Call (866) 320-2646 for a free estimate.

How long does a paver repair or replacement take? A section repair is usually a one- to two-day job; a full driveway replacement typically runs three to five working days depending on base work and weather. Call (866) 320-2646 to get scheduled.

How do you source CWS-compatible parts? We match the part to your project spec sheet and paver label, then source OEM or a quality aftermarket equivalent depending on what actually shows on the surface. Call (866) 320-2646 and we’ll pull your spec first.

We also service KraftMaid, Cambria, and Silestone products across our other trades.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch