Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The San Francisco Owner’s Guide
We install CWS-compatible fencing across San Francisco, and a full fence installation typically runs $4,130 to $10,620 depending on material, linear footage, and gate count. Most residential fence jobs are completed in a single visit once the material is on site. San Francisco homeowners usually call us after a windstorm pushes a post out of plumb, a gate starts dragging on the sidewalk, or they’ve inherited a CWS fence they want matched or extended rather than torn out.
Before anything else: we’re an independent contractor, not affiliated with CWS. We install CWS and CWS-compatible fencing, source the correct components for the specific system in your yard, and warranty the labor in writing.
Which CWS Models This Applies To
CWS covers a few fence families, and the installation details change with each one. The two you’ll see most in San Francisco are welded-wire panel systems (common on hillside lots and dog runs) and framed ornamental or privacy runs that use CWS posts, brackets, and gate hardware. Panel gauges generally fall between 6 and 9 gauge depending on the line, and that gauge is the first thing that determines whether your existing posts can carry a replacement panel or whether the whole run needs reframing.
To identify what you have, look at the post caps and the bracket style where the rail meets the post – CWS fastening hardware is fairly distinctive. Measure the actual post spacing (center to center, not the panel width) and the panel height. On sloped San Francisco yards, the rail angle also matters, and standard panels don’t rack the way stepped installations need them to.
The OEM-versus-aftermarket call is real here. For a gate or a short run where you’re matching existing material, the CWS-branded component is usually the safer bet so the finish and profile line up. For a long privacy run or a full replacement, a quality equivalent built to the same gauge and post spacing often costs less without any meaningful loss in lifespan. We’ll tell you which side of that line your job falls on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Fence Installation Is Failing
Fence failures in San Francisco are rarely sudden. They telegraph ahead of time. Here’s what we see and what’s behind each one.
- Posts leaning or rocking at the base. Usually a footing that’s lost grip in wet, sandy soil or a post set too shallow for the wind load. San Francisco’s hillside lots and sandy western neighborhoods both accelerate this.
- Rust bleeding from welds or the post-to-rail joint. Fog and salt air on the west side eat unprotected steel faster than most owners expect. Surface rust is cosmetic; rust at a weld or bolt hole is structural.
- Gate sagging, dragging, or hard to latch. A hinge or gate post that’s shifted, not a bad hinge. Gates carry more load than panels and fail first.
- Panels loose, rattling, or bowed. Fasteners backing out or brackets corroded through. On a sloped lot this often shows up as one panel riding up out of its bracket.
- Fence out of plumb against the property line. Settling footings or a fence built without a proper stepped or racked alignment. This one leads to neighbor disputes and permit headaches.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fence installation pricing in San Francisco runs $4,130 to $10,620 for a complete residential job. The range is driven by three things: linear footage, material choice (vinyl, wood, ornamental aluminum, or chain link), and how many gates and corners the run has. Sloped or terraced yards push toward the top of the range because of the extra framing and alignment work.
| Item | Typical range |
|---|---|
| Vinyl fence installation | $4,130 – $10,620 |
| Aluminum fence installation | $4,720 – $11,800 |
| Gate repair or realignment | Quoted per gate |
| Post reset / footing repair | Quoted per post |
Your quote will show material, labor, and any permit fees line by line. The number you see is the number you pay – no change orders added after the crew starts. All installation labor is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
Some things you can safely check yourself. Walk the fence line and push on each post to see which ones move. Look closely at the welds and bolt holes for rust that’s eating into the metal rather than just sitting on top of it. Check that the gate latches cleanly and swings without dragging. If a couple of fasteners are loose, tightening them is fine.
Where DIY goes wrong is footing work and post replacement. Digging out and resetting a post means dealing with buried utilities, soil that behaves differently on a San Francisco slope, and getting the depth and concrete right so it holds. A mis-set post takes the whole run out of plumb. On gates, the hinge geometry is fussier than it looks and a bad fix leaves you with a gate that drags within a month. For anything structural, call us at (866) 320-2646 and we’ll take a look.
FAQs
Expect 15 to 20 years for a well-installed steel or ornamental run in most of San Francisco, and 10 to 15 on the foggy, salt-exposed west side where corrosion runs faster. Vinyl holds up similarly but can get brittle with age. Lifespan hinges on the footings and how well the finish is maintained.
Often yes. A sagging gate, a few loose panels, or a single failed post are usually repairable, and we’ll tell you honestly when repair is the better call. If the failure is rust-through at multiple welds or footings that have gone across the whole run, repair costs start to creep up on replacement. Call (866) 320-2646 for a free assessment – we’ll give you a straight answer either way.
Most residential fence jobs in San Francisco are completed in a single visit. Larger runs, sloped lots, and jobs that need footing work can take two to three days. We confirm the schedule in your written quote so there’s no guessing.
We identify your specific CWS system first – post spacing, gauge, bracket style – then source the correct components for that system. Where OEM parts make sense we use them; where a quality equivalent does the same job for less, we’ll say so. We don’t stock parts or carry them on a truck, so we confirm material availability before we schedule. Call (866) 320-2646 to get started – estimates are free.
Whether you need a CWS fence matched, extended, or replaced, we’ll walk the line with you, show you exactly what’s failing, and give you upfront pricing with no surprises. Every project comes with our 730-Day Done Right Promise, background-checked uniformed technicians, and 0% financing for 18 months plus $1,000 off projects over $10,000. We also work with KraftMaid, Cambria, and Silestone on other projects. Call (866) 320-2646 for your free estimate.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.