Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose Dvele Construction
We provide independent Dvele construction service in San Francisco: assessments, repairs, and finish work on Dvele prefab and modular homes. What makes our Dvele work different is that we understand the assembly itself. Panelized walls, factory-set cabinetry, and integrated mechanical chases behave a certain way after the modules are set on site, and our trades work with that logic rather than treating a Dvele home like a stick-built house.
One thing up front: Groundwork Construction Co. of San Francisco is an independent Dvele service provider. We’re not affiliated with, endorsed by, or authorized by Dvele, and we don’t represent the factory. We’re a local construction company whose technicians have worked on enough modular and panelized homes to know their quirks. That independence is the point. We diagnose what’s actually happening, we tell you what it’ll cost, and we back the work with our 730-Day Done Right Promise. San Francisco is a tough place to build and repair, and Dvele homes here sit on steep lots in dense old neighborhoods, which puts its own pressure on every seam, joint, and flashing detail. Call (866) 320-2646 and a live person picks up, day or night.
Why Trust Groundwork Construction Co. of San Francisco for Your Dvele Construction?
Dvele homes are a specific type of construction, and they fail in specific ways. Our technicians have up to 12 years of experience, and much of that time has gone into modular and panelized assembly: reading module seams, knowing where the mechanical chases run behind the panel system, understanding how factory-set cabinet boxes and quartz tops were installed before the home settled. That knowledge changes how we approach a repair. When a door rack or a countertop seam opens, a tech who doesn’t understand module movement will just re-shim the cabinet and call it done. It’ll bind again in a year.
We source OEM-compatible components where they exist, and quality aftermarket equivalents where they don’t. Same cabinet box, same door profile, same countertop thickness and edge detail, so the replacement lines up with the factory reveals instead of fighting them. We don’t make warranty claims on Dvele’s behalf, but we do work in ways that avoid voiding yours: documented scope, correct fastening, no cutting into a chase without mapping it first. Every job is covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction, and the price we quote is the price you pay. Upfront pricing, no surprises.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in San Francisco
These are the issues we see most on Dvele homes in San Francisco. They aren’t random defects, they’re the predictable result of how panelized homes behave once they’re on a steep San Francisco lot in a marine climate.
- Module-to-module seam movement. Wall and ceiling joints move as the home settles and as temperature swings work on the panels. You get hairline drywall cracks and trim separation, and in wet areas, caulk failures around tub and shower surrounds. Rigid caulk and rigid drywall detailing telegraph that movement straight into the finish.
- Factory cabinet and countertop shifts. Cabinet boxes and quartz tops installed at the factory before the module settled often end up slightly out of plane. Doors rack, drawers bind, and the countertop seam opens along the cabinet run. It’s movement, not bad cabinets.
- Buried mechanical and plumbing chases. The chases live inside the panel system. Remodel work that involves moving a sink, adding an outlet, or re-routing a drain needs the chase mapped first. Blind fastening can hit a chase or a wiring run, and that turns a small job into a big one.
- Roof module junction and flashing leaks. This is where Dvele roofs typically leak. Where a panel roof meets a site-built addition, a deck, or another module, the flashing transition is the entry point. If it wasn’t lapped and sealed correctly, the first heavy rain finds it.
- Coastal corrosion at fasteners and flashing. On the west side of San Francisco, fog belt damp and Pacific salt eat standard fasteners and flashing far faster than they should. Stainless hardware and galvanized flashing aren’t upgrades here, they’re the baseline. We re-spec them on small jobs without being asked.
Dvele Parts & Our Repair-vs-Replace Approach
We don’t keep a local parts inventory, and we won’t tell you otherwise. For each job we confirm the Dvele model and the specific component, then match the factory specification where possible: the same cabinet box and door profile, the same quartz or solid-surface countertop thickness, and the same tile or surround system used in the build. A generic aftermarket substitute rarely aligns with the module reveals, and you’ll see the mismatch every day. Where an OEM-compatible part isn’t available, we source a quality equivalent and tell you exactly why we chose it.
Repair or replace? We answer honestly. When the original component is sound but the joint or substrate has failed – a seam that cracked, a cabinet that shifted, a surround that lost its caulk – repair and re-set is usually the right call, and it’s cheaper. Full replacement makes sense when the module interface or the substrate itself is compromised, and we’ll show you the evidence before recommending it. Call (866) 320-2646 for a free estimate and we’ll walk you through what we find.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We identify the Dvele model, map the affected module seams and chases, and trace the symptom to its real cause. A crack at a seam is treated as movement until we prove otherwise.
- 2
Scope and pricing. You get a written, line-item quote before any work starts. Upfront pricing, no surprises. Dvele-specific scope items – re-flashing a roof junction, resetting cabinet boxes, flexible detailing on a seam – are called out individually.
- 3
Repair or install. We re-flash and seal roof junctions correctly, reset cabinetry and surrounds to the factory plane, and finish drywall and trim with a flexible detailing approach so the module line stops telegraphing through the surface. Background-checked, uniformed technicians on every job.
- 4
Test. Water testing on roof and shower work, door and drawer cycling on cabinetry, and a walkthrough with you at the end.
- 5
Warranty handoff. Every job is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in San Francisco
We work on the Dvele prefab single-family home with its panelized wall and roof module system, the Dvele modular ADU and backyard dwelling units, and the factory-assembled kitchen and bath core modules. That covers seam and trim repair, cabinet and countertop resets, walk-in shower conversions and installations, roof junction flashing and repair, and full kitchen remodeling in Dvele homes. If you own a Dvele model we haven’t listed, call us and describe it. Most Dvele work comes down to the same module interfaces, and our technicians have up to 12 years of experience reading them.
We Also Service These Brands
Groundwork Construction Co. of San Francisco isn’t a single-brand shop. We also work with KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler fixtures, and we spec them regularly into kitchen and bath remodels across the city. That multi-brand range matters on a Dvele job: when a factory component can’t be matched, we know the alternatives that will actually fit and hold up in a San Francisco marine climate.
FAQs – Dvele Construction Service in San Francisco
No. We’re an independent Dvele service provider, not affiliated with, endorsed by, or authorized by Dvele. We work on Dvele homes using our own trade experience with panelized and modular assembly, and we don’t represent or speak for the manufacturer. If a repair needs factory parts or a warranty claim, we’ll tell you to go to Dvele directly and help you document what we found.
Where OEM-compatible parts exist, yes, we source them to match the factory specification: same cabinet box and door profile, same countertop thickness, same surround system. Where they don’t exist or aren’t practical, we use a quality equivalent and explain the trade-off before you approve the quote. Call (866) 320-2646 for an exact scope and price – estimates are free.
Most seam repairs, cabinet resets, and roof junction re-flashing are single-visit jobs, often a few hours to a day. A walk-in shower installation or a full kitchen remodel in a Dvele home runs much longer, typically one to several weeks depending on scope and San Francisco permitting. We give you a real timeline in the written quote, not a best-case guess.
We cover the Dvele prefab single-family home, the Dvele modular ADU and backyard dwelling units, and the factory-assembled kitchen and bath core modules. If you’re unsure which model you have, send us the address and a few photos and we’ll identify the system before quoting. Call (866) 320-2646 to get started.
Not if it’s done correctly, but the specifics are Dvele’s to define, not ours. We work in warranty-safe ways: documented scope, correct fastening, no cutting into a chase without mapping it, and matching factory specs where parts are replaced. We can’t make warranty determinations on Dvele’s behalf. Ask Dvele directly about coverage, and we’ll provide the documentation you need.
It depends on scope. Here are the ranges we quote in San Francisco for the work Dvele owners most often book:
| Service | Price range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Walk-In Shower Installation | $5,310 – $14,160 |
| Bathroom Remodel | $10,620 – $33,040 |
| Roof Repair | $470 – $2,125 |
| Roof Replacement | $9,440 – $23,600 |
These are market ranges, not a fixed bid. Call (866) 320-2646 for an exact quote – estimates are free.
Book Your Dvele Service in San Francisco, CA
Whether you’re chasing a hairline crack along a module seam, a countertop that no longer lines up, or a damp stain at a roof panel junction after the rain, we can help. Groundwork Construction Co. of San Francisco gives you a written, line-item quote, background-checked uniformed technicians, and the 730-Day Done Right Promise on every job. Call (866) 320-2646 for a free estimate.
Written by the team at Groundwork Construction Co. of San Francisco.