Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose ECO Window Systems Construction
We provide independent ECO Window Systems construction, repair, and installation service in San Francisco, and we know these products at the level that only comes from installing and repairing them in this city’s housing stock. Fogged dual-pane glass, sticking sliding doors, failed sash balances – we’ve diagnosed and fixed all of it on ECO units across San Francisco. We’re an independent service provider, not affiliated with or authorized by ECO Window Systems, but our familiarity with their window and door lines runs deep.
San Francisco construction happens on and beside steep hills in one of the densest, most historic urban cores in the country. Tight lots, hillside foundations, and a discretionary planning gauntlet that can stretch a year or more before a shovel hits dirt. That reality shapes every window and door job we take on here, because the building envelope on these Victorian and Edwardian row houses has to perform under conditions that inland installs never face.
Call (866) 320-2646 and a live person answers, any hour. Estimates are free and upfront.
Why Trust Groundwork Construction Co. of San Francisco for Your ECO Window Systems Construction?
Our technicians have up to 12 years of experience, and a good share of that time has gone into ECO Window Systems products specifically. We’ve worked with the Series 7000, Series 5000, Series 3000, and Series 9000 lines across San Francisco’s mixed housing – Victorian singles, Edwardian row houses, mid-century stucco-over-wood buildings, and modern downtown high-rises. Different buildings, same brand, different tolerances.
We source OEM-compatible parts whenever they’re available, so fit and warranty compatibility stay intact. That means factory-matched sashes, balances, latches, and insulated glass units rather than whatever aftermarket piece happens to be on a shelf. When a component is obsolete or backordered, we go to quality aftermarket suppliers and tell you plainly why. We never install a part that compromises the window’s performance just to close out a ticket.
Every ECO Window Systems job we complete falls under the 730-Day Done Right Promise. If the work isn’t right, we make it right. That guarantee is written, it’s real, and it’s one of the longest workmanship guarantees in residential construction. Technicians are background-checked and arrive in uniform. Upfront pricing means the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ECO Window Systems Construction Problems We Fix in San Francisco
Marine fog, constant damp, and salt air off the Pacific and the Bay do specific things to windows and doors. Here’s what we actually see on ECO Window Systems products in San Francisco:
- Fogging and seal failure in dual-pane insulated glass units. West-facing ECO vinyl windows take the Pacific fog and UV straight on, and the perimeter seal on an IGU gives out over time. Once moisture gets between the panes, the haze doesn’t clear and the unit loses its insulating value. This is the single most common ECO failure we diagnose in the fog belt.
- Water infiltration at sill pans and corner welds on Series 7000 double-hungs. When factory weep holes get blocked with debris or were undersized for the wind-driven rain this city gets, water backs up and finds the seams. We see staining and soft trim at the sill long before a homeowner notices a leak inside.
- Tilt-latch and sash balance failures. Years of operation in salty air wear the tilt-latch and balance hardware on ECO double-hung models. Sashes start dropping, tilting unevenly, or refusing to stay where you put them. The hardware is replaceable; the frame usually is fine.
- Frame distortion and sticking on Series 5000 aluminum sliding glass doors. In older San Francisco buildings, settling and insufficient shimming throw the track out of square. The door drags, then stops rolling. It’s a shimming and alignment problem more often than a door problem.
- Corroded fasteners and worn weatherstripping on west-side exposures. Standard fasteners and standard weatherstrip don’t hold up in ocean salt. We spec stainless hardware and galvanized flashing on these jobs because the fog belt eats ordinary metal at a fraction of the normal lifespan.
Here’s how this usually plays out. A homeowner notices several ECO Series 7000 double-hung windows are sticking, fogging between the panes, or leaking during heavy rain. The usual culprit is failed IGU seals combined with clogged weep holes and worn sash balances. A qualified local pro typically tests each unit, replaces failed glass and hardware with OEM-matched components, clears and adjusts drainage paths, and re-flashes sills where needed – restoring smooth operation and weather-tightness without full replacement if the frames remain sound.
ECO Window Systems Parts & Our Repair-vs-Replace Approach
We source OEM ECO Window Systems replacement parts – sashes, balances, latches, and glass units – whenever they’re available, because OEM parts preserve fit and warranty compatibility. For obsolete or discontinued components, we turn to quality aftermarket suppliers and prioritize how the part performs over the name on the box. For a window, the difference matters. A balance with the wrong tension rating will fail again inside two years.
We don’t stock parts locally, so on every job we identify exactly what’s needed, confirm availability, and give you a written line-item quote before anything gets ordered. No mystery parts charges later.
Repair or replace? We decide honestly. When the repair cost approaches half the cost of replacement, we tell you replacement makes more financial sense – especially for failed IGUs in coastal exposures, where a new unit with a fresh seal will outlast a patch job. When the frame is sound and only the glass or hardware has failed, repairing saves you real money. Call (866) 320-2646 to schedule a free estimate and get a straight answer.
Our ECO Window Systems Service Process – Step by Step
- 1
Diagnosis. We test each ECO Window Systems unit individually – checking IGU seals for fog, operating every sash and door, inspecting weep holes, sill pans, corner welds, balances, and latches. We photograph what we find and show you.
- 2
Written quote. Line items for parts, labor, and any flashing or weatherproofing correction. Upfront pricing, no surprises. You approve before we order a single component.
- 3
Repair or install. OEM-matched glass, sashes, and hardware installed to the manufacturer’s tolerances. On west-side San Francisco jobs we spec stainless fasteners and galvanized flashing as standard practice, not an upgrade.
- 4
Test and verify. Every unit gets operated through its full range, checked for smooth travel, checked for seal integrity, and checked for drainage. We water-test sills on repairs where infiltration was the complaint.
- 5
Warranty. The 730-Day Done Right Promise covers the workmanship in writing. If something we touched isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Products We Service & Install in San Francisco
We service and install the full range of ECO Window Systems products we encounter in San Francisco, including the Series 7000 Vinyl Double-Hung, the Series 5000 Aluminum Sliding Glass Door, the Series 3000 Awning and Casement, and the Series 9000 Impact-Rated Fixed Window. Each line has its own installation tolerances and flashing details, and each behaves differently in coastal conditions. The Series 9000 impact-rated units are particularly relevant for homeowners in exposed west-side locations facing ocean-driven weather. We handle glass replacement, hardware repair, sash replacement, full unit installation, and retrofit work on all of these lines.
We Also Service These Brands
We’re a multi-trade construction firm, not a single-brand shop. Window and door work connects directly to the rest of your home, and we work across a curated set of brand partners throughout: KraftMaid cabinetry, Cambria and Silestone countertops, Kohler fixtures, and dozens more across roofing, kitchens, baths, and additions. If your ECO Window Systems project turns into a bigger conversation about the building envelope, one contractor carries it from foundation to finish line.
FAQs – ECO Window Systems Construction Service in San Francisco
Yes, in most cases the insulated glass unit can be replaced on its own, and the existing frame stays. Fogging means the IGU seal has failed, not the window. We measure the unit, order a factory-matched replacement IGU, and swap it in – typically far less than a full window replacement. If the frame or sash is also warped or rotted, we’ll tell you that upfront rather than sell you a glass swap that won’t solve the problem. Call (866) 320-2646 for a free assessment.
Nearly always settling or insufficient shimming has thrown the track out of square, so the door no longer rolls true. Older San Francisco buildings shift, and a slider installed without enough shim support distorts as the opening moves. Salty air also corrodes rollers and fasteners on west-side exposures. We re-shim and re-square the frame, replace corroded hardware with stainless, and restore smooth travel.
Yes, the Series 9000 impact-rated fixed window is a good fit for exposed San Francisco locations, and we install them regularly. The laminated impact glass also handles the fog belt and salt air well. The critical detail is installation: impact units demand correct flashing and stainless or galvanized fasteners here, or the corrosion sets in behind the trim where you can’t see it. We spec those as standard practice.
A broken sash can usually be replaced on its own. We order an OEM-matched sash for the specific ECO Window Systems model and swap it into the existing frame, keeping your warranty intact and your costs down. Whole-window replacement only makes sense when the frame itself is distorted, rotted, or the opening has settled badly. We’ll show you which situation you’re in before any work starts.
Repairing failed glass, hardware, or balances typically runs a fraction of replacement cost per unit. Full window replacement in San Francisco runs the ranges below, and impact-rated installation costs more because of the glass and the stricter installation requirements.
| Service | Typical San Francisco Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Roof Repair (adjacent flashing and leak work) | $470 – $2,125 |
Call (866) 320-2646 for an exact quote on your ECO units – estimates are free.
No, repair or replacement done with OEM-compatible parts and correct installation procedures preserves your manufacturer warranty, and we work to keep it that way. That’s why we source OEM components whenever they’re available rather than substituting whatever aftermarket part is convenient. Where a component is obsolete and we go aftermarket, we tell you and explain the warranty implications before you decide. Our own work is covered separately by the 730-Day Done Right Promise.
Book Your ECO Window Systems Service in San Francisco, CA
Fogged glass, sticking sliders, failed balances – we’ve fixed all of it on ECO Window Systems products across San Francisco, and we’ll give you a straight diagnosis and a written, upfront quote. Call (866) 320-2646 for a free estimate. A live person answers, 24/7. Your work is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.