Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The San Francisco Owner’s Guide
We install and repair ES Windows-compatible driveway and paver assemblies across San Francisco, with typical installed projects running $8,260 – $21,240 for paver driveways and $4,130 – $12,980 for paver patios. If you’re dealing with a specific failed component, we source the matching part and can often complete the swap in a single visit. Most San Francisco owners discover the problem the same way: a paver that rocks underfoot after rain, a joint that keeps washing out on a slope, or a section that has started to settle unevenly against the foundation.
ES Windows builds exterior systems as complete assemblies, and the driveway and paver components are engineered to work together. When one part goes, the failure usually traces back to how the pieces were specified, set, and drained on your particular lot, not just to the piece itself.
Which ES Windows Models This Applies To
ES Windows exterior paver and driveway components show up across several series lines, and the part you need depends on which series was spec’d for your property. The fastest way to identify it is to check the original project documentation or the label on the assembly itself. Look for the series designation and the component code, then measure the actual dimensions of the failed piece, because nominal sizing and true dimensions differ between series and between production runs.
The OEM-versus-aftermarket call matters here. For ES Windows assemblies still under the original manufacturer’s coverage, an OEM part keeps the system matched and protects that coverage. For older San Francisco installs where the OEM part is discontinued or on a long lead time, a quality aftermarket equivalent that meets the same load and drainage spec is a sound choice, as long as the installer verifies the fit rather than forcing it. We’re an independent service provider, not affiliated with ES Windows, so we tell you plainly which path makes sense for your assembly instead of steering you toward one for our convenience.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
Real symptoms, and what’s actually going on underneath:
- Pavers rocking or shifting underfoot. Usually a base or bedding layer that wasn’t compacted to spec, or water finding its way under the edge restraint. Movement means the sub-base is losing integrity.
- Joint sand washing out after rain. On San Francisco’s sloped lots, poor drainage concentrates flow and scours the joints. Repeated loss points to a grading or drainage issue, not just missing sand.
- Settlement against the foundation or garage apron. A visible dip where the driveway meets the structure is often erosion or a failed transition detail. Left alone, it puts stress on the adjacent wall and framing.
- Cracked or spalling paver faces. Freeze-thaw is rare here, but salt air, moisture cycling, and de-icing products can fatigue a lower-grade paver. Cracking in a matched set usually means the piece is at the end of its service life.
- Standing water or persistent puddles. Ponding that lasts more than a day indicates the slope or base has settled out of plane. This is the symptom most likely to damage the assembly further if it’s ignored.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
San Francisco pricing for ES Windows-compatible driveway and paver work, installed:
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement: $5,900 – $16,520
- Paver patio installation: $4,130 – $12,980
- Driveway sealing: $295 – $825
What drives the range: square footage, how much demolition and haul-off the old surface requires, base depth and compaction needed for your soil and slope, drainage corrections, and whether the part is a straightforward OEM match or needs an aftermarket fit. We quote parts and labor transparently, so the number you see is the number you pay. All work is backed by our 730-Day Done Right Promise, with the number in writing before we start.
DIY or Call Us?
Some checks you can safely do yourself. Walk the driveway after a rain and note where water pools, photograph the failed section with a tape measure in frame, and pull any original project paperwork to pinpoint the series and part. That information saves time on the estimate and helps us source the right piece.
Where DIY goes wrong is in the reinstallation. A paver or transition that’s reset without proper base compaction and drainage will fail again within a season or two, and on sloped San Francisco lots the water issue compounds fast. Setting the piece incorrectly can also compromise the adjacent assembly and the structure it meets. If the failure involves settlement against the foundation or persistent ponding, call us at (866) 320-2646 and we’ll take a look.
One honest note on sourcing: we don’t claim to stock ES Windows parts or carry them on a truck. We source the correct part for your assembly and install it, which means we’ll confirm the match before we commit to a date.
FAQs
A well-installed assembly typically holds up well beyond a decade, and often longer. Coastal moisture, salt air, and sloped-lot drainage are the main factors that shorten life here, not temperature extremes. Call (866) 320-2646 for an assessment of your specific installation.
Sometimes, yes. A single shifted paver or a localized joint failure can often be reset and resealed without replacing the assembly. If the base has settled or drainage is compromised, a repair alone won’t hold. We’ll tell you which situation you’re in.
A single-part replacement is often completed in one visit. Larger repairs that involve base correction or drainage work take longer. We give you a realistic timeline in the written quote. Call (866) 320-2646 to schedule a free estimate.
We identify your ES Windows series from the label and actual measurements, then confirm an OEM or verified aftermarket equivalent that meets the same load and drainage spec. You’ll see the part cost broken out in your quote. Estimates are free; call (866) 320-2646.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco and nearby areas.